Using a utility system grey-box model as a support tool for progressive energy management and automation of buildings

Abstract The research presented here is focused on improving energy management in a building complex through analytical and empirical modelling of its utilities. First, we introduce current European policy on energy savings in buildings. The modelling starts with a literature review and a thorough study on a heating and cooling system of a particular building complex—the National Theatre in Prague, Czech Republic. Standard building automation and control systems cannot optimize the building’s operations to the fullest and thus do not provide the best cost savings possible. A mathematical model of the energy system and its integration into a building control system is an essential prerequisite for any optimization here. The development of a model which can be integrated into a control system during real-time operation of the building is a very complicated task. Our paper presents a procedure to develop such a model and methods to apply it in a real-life operation. First, the mathematical model is implemented in a simulation tool, which enables an efficiency evaluation of the system. This simulation tool offers especially important support for building automation and control systems when deciding the most effective operation of heat or cold utilities. The model greatly helps in monitoring and optimizing daily offtake limits for natural gas, which is highly appreciated by the building’s technical management. Our practical applications of the model show new possibilities for simulation and optimization calculations which are completely unique in building management systems so far.

[1]  Jui-Che Tu,et al.  Industry: Academia Partnerships in Design Education , 2017 .

[2]  Shengwei Wang,et al.  A model-based online fault detection and diagnosis strategy for centrifugal chiller systems , 2005 .

[3]  Derk J. Swider,et al.  A comparison of empirically based steady-state models for vapor-compression liquid chillers , 2003 .

[4]  Andrew Kusiak,et al.  Modeling and optimization of HVAC energy consumption , 2010 .

[5]  Faïz Gallouj,et al.  Energy consumption in service industries: Challenging the myth of non-materiality , 2012 .

[6]  Zhenjun Ma,et al.  Supervisory and optimal control of central chiller plants using simplified adaptive models and genetic algorithm , 2011 .

[7]  Robin Smith,et al.  The use of reduced models for design and optimisation of heat-integrated crude oil distillation systems , 2014 .

[8]  Wan-Chen Lu,et al.  Evaluation of the suitability of empirically-based models for predicting energy performance of centrifugal water chillers with variable chilled water flow , 2012 .

[9]  L. Suganthi,et al.  Energy models for demand forecasting—A review , 2012 .

[10]  Fariborz Haghighat,et al.  Correlation based models for the simulation of energy performance of screw chillers , 2003 .

[11]  A. M. F. Fileti,et al.  Saving energy using fuzzy control applied to a chiller: an experimental study , 2011, Clean Technologies and Environmental Policy.

[12]  Farrokh Janabi-Sharifi,et al.  Review of modeling methods for HVAC systems , 2014 .

[13]  Gian Marco Revel,et al.  A semantic service-oriented platform for energy efficient buildings , 2015, Clean Technologies and Environmental Policy.

[14]  Daehie Hong,et al.  Performance evaluation and modeling of a hybrid cooling system combining a screw water chiller with a ground source heat pump in a building , 2010 .

[15]  Petr Stluka,et al.  Decision support tools for advanced energy management , 2008 .

[16]  Jin Wen,et al.  Review of building energy modeling for control and operation , 2014 .

[17]  M. Mohanraj,et al.  Applications of artificial neural networks for refrigeration, air-conditioning and heat pump systems—A review , 2012, Renewable and Sustainable Energy Reviews.

[18]  Guillermo Escrivá-Escrivá.  Basic actions to improve energy efficiency in commercial buildings in operation , 2011 .

[19]  V. Selladurai,et al.  ANN–GA approach for predictive modeling and optimization of NOx emission in a tangentially fired boiler , 2013, Clean Technologies and Environmental Policy.