Statistical comparison of leaching behavior of incineration bottom ash using seawater and deionized water: Significant findings based on several leaching methods.

[1]  S. Zee,et al.  Influence of electrolyte composition and pH on cadmium sorption by an acid sandy soil , 1993 .

[2]  Carlton C. Wiles,et al.  Municipal Solid Waste Combustion Ash: State-of-the-Knowledge , 1996, Municipal Solid Wastes.

[3]  H. A. van der Sloot,et al.  Developments in evaluating environmental impact from utilization of bulk inert wastes using laboratory leaching tests and field verification , 1996 .

[4]  J. Pera,et al.  Use of incinerator bottom ash in concrete , 1997 .

[5]  J. Meima,et al.  Complexation of Cu with Dissolved Organic Carbon in Municipal Solid Waste Incinerator Bottom Ash Leachates , 1999 .

[6]  B. Quénée,et al.  The use of MSWI (Municipal solid waste incineration) bottom ash as aggregates in hydraulic concrete , 2000 .

[7]  H. A. van der Sloot,et al.  Characteristics, treatment and utilization of residues from municipal waste incineration. , 2001, Waste management.

[8]  Reaction-based model describing competitive sorption and transport of Cd, Zn, and Ni in an acidic soil. , 2001, Environmental science & technology.

[9]  O. Borggaard,et al.  pH buffering in acidic soils developed under Picea abies and Quercus robur – effects of soil organic matter, adsorbed cations and soil solution ionic strength , 2001 .

[10]  A. C. Garrabrants,et al.  Changes in constituent equilibrium leaching and pore water characteristics of a Portland cement mortar as a result of carbonation. , 2004, Waste management.

[11]  W. Hartley,et al.  Arsenic and heavy metal mobility in iron oxide-amended contaminated soils as evaluated by short- and long-term leaching tests. , 2004, Environmental pollution.

[12]  Rajeev,et al.  Adsorption of Co, Ni, Cu, and Zn on hydrous manganese dioxide from complex electrolyte solutions resembling sea water in major ion content. , 2004, Journal of colloid and interface science.

[13]  P. Giamarchi,et al.  Study of trace metal leaching from coals into seawater. , 2007, Chemosphere.

[14]  P. He,et al.  Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling , 2008 .

[15]  R. Swennen,et al.  The application of pH(stat) leaching tests to assess the pH-dependent release of trace metals from soils, sediments and waste materials. , 2008, Journal of hazardous materials.

[16]  S. Al-Abed,et al.  Leaching behavior of mineral processing waste: comparison of batch and column investigations. , 2008, Journal of hazardous materials.

[17]  C. Vandecasteele,et al.  Speciation of Cu in MSWI bottom ash and its relation to Cu leaching , 2008 .

[18]  D. B. Kleja,et al.  Metal leaching from MSWI bottom ash as affected by salt or dissolved organic matter. , 2009, Waste management.

[19]  K. Chiang,et al.  Comparison of leaching characteristics of heavy metals in APC residue from an MSW incinerator using various extraction methods. , 2009, Waste management.

[20]  N. Badawy,et al.  Effect of ionic strength on the adsorption of copper and chromium ions by vermiculite pure clay mineral. , 2009, Journal of hazardous materials.

[21]  G. Mckay,et al.  Use of incineration MSW Ash: A Review , 2010 .

[22]  M. Coquery,et al.  Comparison of dynamic mobilization of Co, Cd and Pb in sediments using DGT and metal mobility assessed by sequential extraction. , 2010, Chemosphere.

[23]  R. Siddique.  Use of municipal solid waste ash in concrete. , 2010 .

[24]  M. Weng,et al.  Mechanical properties of incineration bottom ash: the influence of composite species. , 2010, Waste management.

[25]  F. Takahashi,et al.  Mineralogical characterization of municipal solid waste incineration bottom ash with an emphasis on heavy metal-bearing phases. , 2011, Journal of hazardous materials.

[26]  R. Comans,et al.  Characterisation of major component leaching and buffering capacity of RDF incineration and gasification bottom ash in relation to reuse or disposal scenarios. , 2012, Waste management.

[27]  T. Ternes,et al.  Leaching of metal(loid)s from a construction material: influence of the particle size, specific surface area and ionic strength. , 2012, Journal of hazardous materials.

[28]  A. Lobo,et al.  Multivariate factorial analysis to design a robust batch leaching test to assess the volcanic ash geochemical hazard. , 2012, Journal of hazardous materials.

[29]  A. Aydilek,et al.  Experimental and numerical analysis of metal leaching from fly ash-amended highway bases. , 2012, Waste management.

[30]  Adela P Galvín,et al.  Comparison of batch leaching tests and influence of pH on the release of metals from construction and demolition wastes. , 2012, Waste management.

[31]  M. Castellote,et al.  Electrokinetic remediation of dredged sediments polluted with heavy metals with different enhancing electrolytes , 2012 .

[32]  J. Ayuso,et al.  Analysis of leaching procedures for environmental risk assessment of recycled aggregate use in unpaved roads , 2013 .

[33]  W. Kuo,et al.  Use of washed municipal solid waste incinerator bottom ash in pervious concrete , 2013 .

[34]  Xiaoli Chai,et al.  Characterization of controlled low-strength material obtained from dewatered sludge and refuse incineration bottom ash: mechanical and microstructural perspectives. , 2013, Journal of environmental management.

[35]  Raymond Lau,et al.  Mobility of heavy metals and rare earth elements in incineration bottom ash through particle size reduction , 2014 .

[36]  J. Ngila,et al.  Reactive-transport modeling of fly ash–water–brines interactions from laboratory-scale column studies , 2014 .

[37]  Jaeyoung Choi,et al.  The transport behavior of As, Cu, Pb, and Zn during electrokinetic remediation of a contaminated soil using electrolyte conditioning. , 2014, Chemosphere.

[38]  Seungha Lee,et al.  Geochemical characteristics and microbial community composition in toxic metal-rich sediments contaminated with Au-Ag mine tailings. , 2015, Journal of hazardous materials.

[39]  H. A. van der Sloot,et al.  Life cycle assessment and residue leaching: the importance of parameter, scenario and leaching data selection. , 2015, Waste management.

[40]  U. K. Dewangan,et al.  Suitability of leaching test methods for fly ash and slag: A review , 2015 .

[41]  T. Astrup,et al.  Construction and demolition waste: Comparison of standard up-flow column and down-flow lysimeter leaching tests. , 2015, Waste management.

[42]  Fei Ren,et al.  A review of municipal solid waste environmental standards with a focus on incinerator residues , 2015 .

[43]  Oswer,et al.  SW-846 Test Method 1311: Toxicity Characteristic Leaching Procedure , 2015 .

[44]  Daniel C W Tsang,et al.  Biochar-induced changes in soil properties affected immobilization/mobilization of metals/metalloids in contaminated soils , 2017, Journal of Soils and Sediments.

[45]  J. Ayala,et al.  A Case Study of Landfill Leachate Using Coal Bottom Ash for the Removal of Cd2+, Zn2+ and Ni2+ , 2016 .

[46]  E. Zeng,et al.  Leaching heavy metals from the surface soil of reclaimed tidal flat by alternating seawater inundation and air drying. , 2016, Chemosphere.

[47]  A. Anctil,et al.  Implications for current regulatory waste toxicity characterisation methods from analysing metal and metalloid leaching from photovoltaic modules , 2017 .

[48]  V. Chang,et al.  Review of MSWI bottom ash utilization from perspectives of collective characterization, treatment and existing application , 2017 .

[49]  J. Dijkstra,et al.  Guidance document on hazard classification of MSWI bottom ash , 2017 .

[50]  A. N. D. R E A S V O E G E L I N, † V I J A,et al.  Reaction-Based Model Describing Competitive Sorption and Transport of Cd , Zn , and Ni in an Acidic Soil , 2022 .