Localized High Birefringence Induced in SMF-28 Fiber by Femtosecond IR Laser Exposure of the Cladding

A process for creating a local high fiber birefringence and large variation in refractive-index modulation with a polarization in fiber Bragg gratings using post writing exposures with femtosecond pulses is presented. A birefringence as high as ~8 times 10-4 was obtained in the core of SMF-28 fiber by exposing the cladding of the fiber in close proximity to the core/cladding interface with a modulated multibeam interference field created by a phase mask. The birefringence is likely due to the induced stress rather than the direct asymmetric refractive index modification.

[1]  S. Mihailov,et al.  Fabrication of fiber Bragg gratings (FBG) in all-SiO2 and Ge-doped core fibers with 800 nm picosecond radiation , 2003 .

[2]  D. Grobnic,et al.  Bragg gratings written in all-SiO/sub 2/ and Ge-doped core fibers with 800-nm femtosecond radiation and a phase mask , 2004, Journal of Lightwave Technology.

[3]  I. Bennion,et al.  Direct writing of fibre Bragg gratings by femtosecond laser , 2004 .

[4]  Bernard Prade,et al.  Writing of permanent birefringent microlayers in bulk fused silica with femtosecond laser pulses , 1999 .

[5]  J Capmany,et al.  Spectral characterization of differential group delay in uniform fiber Bragg gratings. , 2005, Optics express.

[6]  P. Corkum,et al.  Stress in femtosecond-laser-written waveguides in fused silica. , 2004, Optics letters.

[7]  S. Mihailov,et al.  Formation of Type I-IR and Type II-IR gratings with an ultrafast IR laser and a phase mask. , 2005, Optics express.

[8]  W A Reed,et al.  Birefringence reduction in side-written photoinduced fiber devices by a dual-exposure method. , 1994, Optics letters.

[9]  David J. Webb,et al.  Long period grating directional bend sensor based on asymmetric index modification of cladding , 2005 .

[10]  E. Udd,et al.  High pressure sensing using fiber Bragg gratings written in birefringent side hole fiber , 2002, 2002 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002(Cat. No.02EX533).

[11]  I Bennion,et al.  Distributed Bragg reflector fiber laser fabricated by femtosecond laser inscription. , 2006, Optics letters.

[12]  S. Mihailov,et al.  Generation of pure two-beam interference grating structures in an optical fiber with a femtosecond infrared source and a phase mask. , 2004, Optics letters.

[13]  Ping Lu,et al.  Multiple-beam interference patterns in optical fiber generated with ultrafast pulses and a phase mask. , 2004, Optics letters.

[14]  S. Mihailov,et al.  Characterization of the growths of UV-induced birefringence in effective mode index and index modulation in fiber Bragg gratings , 2005, IEEE Photonics Technology Letters.

[15]  S. Mihailov,et al.  Long-term thermal stability tests at 1000 °C of silica fibre Bragg gratings made with ultrafast laser radiation , 2006 .

[16]  S. LaRochelle,et al.  Modeling and experimental demonstration of ultracompact multiwavelength distributed Fabry-Pe/spl acute/rot fiber lasers , 2005, Journal of Lightwave Technology.

[17]  Victor Mizrahi,et al.  Characterization of UV-induced birefringence in photosensitive Ge-doped silica optical fibers , 1994 .

[18]  S. Mihailov,et al.  Characterization of the Birefringence in Fiber Bragg Gratings Fabricated With an Ultrafast-Infrared Laser , 2007, Journal of Lightwave Technology.

[19]  P. Kazansky,et al.  Form birefringence and negative index change created by femtosecond direct writing in transparent materials. , 2004, Optics letters.

[20]  I. Bennion,et al.  Highly birefringent long period gratings fabricated with femtosecond laser , 2006, 2006 Optical Fiber Communication Conference and the National Fiber Optic Engineers Conference.

[21]  Yong-Kwan Park,et al.  Stable single-mode erbium fiber-grating laser for digital communication , 1993 .

[22]  Seungtae Oh,et al.  Discrimination of temperature and strain with a single FBG based on the birefringence effect. , 2004, Optics express.