Analysis of clustering, interphase region, and orientation effects on the electrical conductivity of carbon nanotube–polymer nanocomposites via computational micromechanics

Abstract A multiscale model based on computational micromechanics techniques is developed for determining the effective electrical conductivity of carbon nanotube–polymer nanocomposites containing bundles of SWCNTs at a wide range of SWCNT volume fractions above and below the observed percolation concentrations. The model is applied for both randomly oriented and fully aligned nanotube bundle orientation distributions, with emphasis on the latter in elucidating the relative impact of clustering and nanoscale effects on the effective electrical conductivity of nanocomposites. Nanocomposites consisting of aligned, well-dispersed and clustered/bundled SWCNTs are studied to indicate the influence of clustering on the effective electrical conductivity. A parametric study in terms of interphase thickness and interphase conductivity for both the well-dispersed and clustered arrangements is conducted to allow for the assessment of both the independent influence of the interphase layer and of the combined effects of clustering and interphase regions on the effective electrical conductivity of nanocomposites with aligned SWCNTs. Effective nanotube bundle properties obtained from clustered nanotube arrangements both with and without interphase regions are subsequently applied in an orientation distribution homogenization technique in order to obtain the effective electrical conductivity of nanocomposites consisting of randomly oriented SWCNT bundles. The resulting nanocomposite electrical conductivities are compared with characterization data available in the literature, and are discussed in terms of two mechanisms proposed in the literature for the low volume fraction electrical percolation observed in nanocomposites.

[1]  Hatta Hiroshi,et al.  Equivalent inclusion method for steady state heat conduction in composites , 1986 .

[2]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[3]  Daniel C. Hammerand,et al.  Computational Micromechanics of Clustering and Interphase Effects in Carbon Nanotube Composites , 2007 .

[4]  Dimitris C. Lagoudas,et al.  A Micromechanics Model for the Electrical Conductivity of Nanotube-Polymer Nanocomposites , 2009 .

[5]  Guangjun Hu,et al.  Low percolation thresholds of electrical conductivity and rheology in poly(ethylene terephthalate) through the networks of multi-walled carbon nanotubes , 2006 .

[6]  D. Lagoudas,et al.  Computational Micromechanics Analysis of the Effects of Interphase Regions and Bundle Packing on the Effective Electrical Properties of Carbon Nanotube-Polymer Nanocomposites , 2009 .

[7]  T. Miloh,et al.  On the effective thermal conductivity of coated short‐fiber composites , 1991 .

[8]  Bodo Fiedler,et al.  Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites , 2006 .

[9]  Krzysztof Pielichowski,et al.  Polymer Nanocomposites for Aerospace Applications: Fabrication , 2004 .

[10]  U. Sundararaj,et al.  Big returns from small fibers: A review of polymer/carbon nanotube composites , 2004 .

[11]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[12]  D. Carroll,et al.  Dynamic electrical properties of polymer-carbon nanotube composites: Enhancement through covalent bonding , 2006 .

[13]  G. Odegard,et al.  Constitutive Modeling of Nanotube- Reinforced Polymer Composite Systems , 2001 .

[14]  Minoru Taya,et al.  Effective thermal conductivity of a misoriented short fiber composite , 1985 .

[15]  R. Hill.  A self-consistent mechanics of composite materials , 1965 .

[16]  Mark J. Schulz,et al.  A carbon nanotube strain sensor for structural health monitoring , 2006 .

[17]  Hui-Ming Cheng,et al.  Mechanical and electrical properties of a MWNT/epoxy composite , 2002 .

[18]  H. Gray,et al.  Long-range electron transfer. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[19]  H. Lezec,et al.  Electrical conductivity of individual carbon nanotubes , 1996, Nature.

[20]  R. Christensen,et al.  Solutions for effective shear properties in three phase sphere and cylinder models , 1979 .

[21]  Martin L. Dunn,et al.  Micromechanics predictions of the effective electroelastic moduli of piezoelectric composites , 1993 .

[22]  E. Siochi,et al.  Electrical properties of single wall carbon nanotube reinforced polyimide composites , 2003 .

[23]  H. Garmestani,et al.  Enhancement of thermal and electrical properties of carbon nanotube polymer composites by magnetic field processing , 2003 .

[24]  A. Zettl,et al.  Thermal conductivity of single-walled carbon nanotubes , 1998 .

[25]  Christian A. Martin,et al.  Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites , 2004 .

[26]  Dimitris C. Lagoudas,et al.  Micromechanical analysis of the effective elastic properties of carbon nanotube reinforced composites , 2006 .

[27]  Takashi Kashiwagi,et al.  An infiltration method for preparing single-wall nanotube/epoxy composites with improved thermal conductivity , 2006 .

[28]  Wei Zhou,et al.  Nanotube Networks in Polymer Nanocomposites: Rheology and Electrical Conductivity , 2004 .

[29]  Jan Drewes Achenbach,et al.  Effect of interphases on micro and macromechanical behavior of hexagonal-array fiber composites , 1990 .

[30]  David Hui,et al.  A critical review on nanotube and nanotube/nanoclay related polymer composite materials , 2006 .

[31]  Otto Zhou,et al.  STRUCTURE AND PROPERTIES OF CARBON NANOTUBE REINFORCED NANOCOMPOSITES , 2002 .

[32]  Dimitris C. Lagoudas,et al.  Modeling porous shape memory alloys using micromechanical averaging techniques , 2002 .

[33]  Petra Pötschke,et al.  Rheological and dielectrical characterization of melt mixed polycarbonate-multiwalled carbon nanotube composites , 2004 .

[34]  C. Nan.  Effective‐medium theory of piezoelectric composites , 1994 .

[35]  D. Lagoudas,et al.  MODELING FUNCTIONALLY GRADED INTERPHASE REGIONS IN CARBON NANOTUBE REINFORCED COMPOSITES , 2006 .

[36]  K. Watson,et al.  Polymer-Single Wall Carbon Nanotube Composites for Potential Spacecraft Applications , 2001 .

[37]  C. Friedrich,et al.  Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene , 2004 .

[38]  D. Lagoudas,et al.  A Micromechanics Model for the Thermal Conductivity of Nanotube-Polymer Nanocomposites , 2008 .

[39]  Q. Xue,et al.  The interface effect of the effective electrical conductivity of carbon nanotube composites , 2007 .

[40]  J. Coleman,et al.  Charge transport effects in field emission from carbon nanotube-polymer composites , 2005 .

[41]  P. Avouris,et al.  Mechanical Properties of Carbon Nanotubes , 2001 .

[42]  Darren J. Martin,et al.  Polyethylene multiwalled carbon nanotube composites , 2005 .

[43]  N. Marzari,et al.  Textural and Micromorphological Effects on the Overall Elastic Response of Macroscopically Anisotropic Composites , 1992 .