Collision frequency and collisional particle pressure in three-phase fluidized beds

Experiments were carried out to estimate the frequency of collisions and the collisional particle pressure in an inverse three-phase fluidized bed. The collisional particle pressure is the additional pressure exerted on the wall of a system due to the impacts of the particles. The measures were taken by means of a high-frequency-response hydrophone. The effects of solid hold-up and gas velocity were investigated. The frequency of the collisions appeared to increase with the solid hold-up, up to a given value, and decrease for solid amounts approaching the fixed bed state. The particle pressure variation with solid hold-up was a bell-curve whose shape could be both represented by the mechanistic model of Batchelor (J. Fluid Mech. 193 (1988) 75) and the biofilm abrasion rate suggested by Gjaltema, van Loosdrecht and Heijnen (Biotechnol. Bioeng. 55(1) (1997) 206). A direct correlation for estimating the frequency of collisions and the particle pressure as a function of the operating parameters is proposed.

[1]  M. Rovatti,et al.  An experimental model of biofilm detachment in liquid fluidized bed biological reactors. , 2000, Biotechnology and Bioengineering.

[2]  Hideki Harada,et al.  Adhesion strength of biofilm developed in an attached-growth reactor , 1994 .

[3]  Valentina Lazarova,et al.  Hydrodynamics of a three-phase fluidized bed—the inverse turbulent bed , 1997 .

[4]  Liang-Shih Fan,et al.  Hydrodynamic characteristics of inverse fluidization in liquid—solid and gas—liquid—solid systems , 1982 .

[5]  J. Chaouki,et al.  Noninvasive Tomographic and Velocimetric Monitoring of Multiphase Flows , 1997 .

[6]  D. Thomas,et al.  Contribution à l'étude hydrodynamique d'un lit fluidisé triphasique inverse fonctionnant à contre-courant , 1988 .

[7]  Liang-Shih Fan,et al.  Fundamentals of gas‐liquid‐solid fluidization , 1985 .

[8]  G. Batchelor,et al.  A new theory of the instability of a uniform fluidized bed , 1988, Journal of Fluid Mechanics.

[9]  L. Fan,et al.  Hydrodynamics of constrained inverse fludization and semifluidization in a gas-liquid-solid system , 1983 .

[10]  Liang-Shih Fan,et al.  Gas-Liquid-Solid Fluidization Engineering , 1989 .

[11]  M. V. van Loosdrecht,et al.  Abrasion of suspended biofilm pellets in airlift reactors: effect of particle size. , 1997, Biotechnology and bioengineering.

[12]  R. Moletta,et al.  THE INVERSE TURBULENT BED: A NOVEL BIOREACTOR FOR ANAEROBIC TREATMENT , 2000 .

[13]  R. Moletta,et al.  Some hydrodynamic characteristics of inverse three phase fluidized-bed reactors , 1999 .

[14]  A. Amirtharajah.  Optimum Backwashing of Sand Filters , 1978 .

[15]  K. Schügerl.  Three-phase-biofluidization—Application of three-phase fluidization in the biotechnology—A review , 1997 .

[16]  B. Rittmann,et al.  Biofilm detachment mechanisms in a liquid‐fluidized bed , 1991, Biotechnology and bioengineering.

[17]  Roberto Zenit,et al.  Collisional particle pressure measurements in solid–liquid flows , 1997, Journal of Fluid Mechanics.

[18]  Milorad P. Dudukovic,et al.  Multiphase reactors – revisited , 1999 .

[19]  Francesc Gòdia,et al.  Fluidized‐Bed Bioreactors , 1995 .

[20]  K. Luyben,et al.  Hydrodynamical interactions between particles and liquid flows in biochemical applications , 1996 .

[21]  M. V. van Loosdrecht,et al.  Detachment of biomass from suspended nongrowing spherical biofilms in airlift reactors , 1995, Biotechnology and bioengineering.