Multi-dimensional liquid water transport in the cathode of a PEM fuel cell with consideration of the micro-porous layer (MPL)

A multi-dimensional two-phase PEM fuel cell model, which is capable of handling the liquid water transport across different porous materials, including the catalyst layer (CL), the micro-porous layer (MPL), and the macro-porous gas diffusion medium (GDM), has been developed and applied in this paper for studying the liquid water transport phenomena with consideration of the MPL. Numerical simulations show that the liquid water saturation would maintain the highest value inside the catalyst layer while it possesses the lowest value inside the MPL, a trend consistent qualitatively with the high-resolution neutron imaging data. The present multi-dimensional model can clearly distinguish the different effects of the current-collecting land and the gas channel on the liquid water transport and distribution inside a PEM fuel cell, a feature lacking in the existing one-dimensional models. Numerical results indicate that the MPL would serve as a barrier for the liquid water transport on the cathode side of a PEM fuel cell.

[1]  C. Hebling,et al.  Visualization of water buildup in the cathode of a transparent PEM fuel cell , 2003 .

[2]  Yun Wang,et al.  Analysis of Reaction Rates in the Cathode Electrode of Polymer Electrolyte Fuel Cell I. Single-Layer Electrodes , 2008 .

[3]  Thomas A. Trabold,et al.  Neutron images of the through-plane water distribution of an operating PEM fuel cell , 2007 .

[4]  Chaoyang Wang,et al.  Prediction of Dry-Wet-Dry Transition in Polymer Electrolyte Fuel Cells , 2007 .

[5]  Hongtan Liu,et al.  A two-phase flow and transport model for the cathode of PEM fuel cells , 2002 .

[6]  Hua Meng,et al.  A two-phase non-isothermal mixed-domain PEM fuel cell model and its application to two-dimensional simulations , 2007 .

[7]  H. Meng.  Numerical investigation of transient responses of a PEM fuel cell using a two-phase non-isothermal mixed-domain model , 2007 .

[8]  Hua Meng,et al.  A three-dimensional PEM fuel cell model with consistent treatment of water transport in MEA , 2006 .

[9]  Nathan P. Siegel,et al.  In Situ High-Resolution Neutron Radiography of Cross-Sectional Liquid Water Profiles in Proton Exchange Membrane Fuel Cells , 2008 .

[10]  Chao-Yang Wang,et al.  Two-phase transport and the role of micro-porous layer in polymer electrolyte fuel cells , 2004 .

[11]  Sandip Mazumder,et al.  Rigorous 3-D mathematical modeling of PEM fuel cells. II. Model predictions with liquid water transport , 2003 .

[12]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .

[13]  Wei Jiang,et al.  Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part I. Current status of modeling research and model development , 2006 .

[14]  Xianguo Li,et al.  Numerical analysis of dynamic processes in fully humidified PEM fuel cells , 2007 .

[15]  Chao-Yang Wang,et al.  Model of Two-Phase Flow and Flooding Dynamics in Polymer Electrolyte Fuel Cells , 2005 .

[16]  Chao-Yang Wang,et al.  Quantification of Liquid Water Saturation in a PEM Fuel Cell Diffusion Medium Using X-ray Microtomography , 2006 .

[17]  Z. H. Wang,et al.  Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells , 2000 .

[18]  Yun Wang,et al.  Modeling of two-phase transport in the diffusion media of polymer electrolyte fuel cells , 2008 .

[19]  V. Yang,et al.  Vaporization of Liquid Oxygen (LOX) Droplets in Hydrogen and Water Environments under Sub- and Super-Critical Conditions , 2007 .

[20]  Hyunchul Ju,et al.  A single-phase, non-isothermal model for PEM fuel cells , 2005 .

[21]  Adam Z. Weber,et al.  Modeling and High-Resolution-Imaging Studies of Water-Content Profiles in a Polymer-Electrolyte-Fuel-Cell Membrane-Electrode Assembly , 2008 .

[22]  Chaoyang Wang,et al.  Probing Liquid Water Saturation in Diffusion Media of Polymer Electrolyte Fuel Cells , 2007 .

[23]  T. Nguyen,et al.  Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields , 2000 .

[24]  Ned Djilali,et al.  A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell , 2003 .

[25]  Jack S. Brenizer,et al.  Quantification of liquid water accumulation and distribution in a polymer electrolyte fuel cell using neutron imaging , 2006 .

[26]  Zhigang Qi,et al.  Improvement of water management by a microporous sublayer for PEM fuel cells , 2002 .

[27]  Suresh G. Advani,et al.  Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell , 2007 .

[28]  Yun Wang,et al.  Analysis of the Reaction Rates in the Cathode Electrode of Polymer Electrolyte Fuel Cells , 2009 .

[29]  Anzhong Gu,et al.  Three dimensional, two phase flow mathematical model for PEM fuel cell: Part I. Model development , 2004 .

[30]  Trung Van Nguyen,et al.  A Two-Dimensional Two-Phase Model of a PEM Fuel Cell , 2006 .

[31]  Chao-Yang Wang,et al.  Electron Transport in PEFCs , 2004 .

[32]  Chao-Yang Wang,et al.  Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells , 2000 .