Data Fusion of Electronic Nose and Electronic Tongue for Detection of Mixed Edible-Oil

For the problem of the waste of the edible-oil in the food processing, on the premise of food security, they often need to add new edible-oil to the old frying oil which had been used in food processing to control the cost of the production. Due to the fact that the different additive proportion of the oil has different material and different volatile gases, we use fusion technology based on the electronic nose and electronic tongue to detect the blending ratio of the old frying oil and the new edible-oil in this paper. Principal component analysis (PCA) is used to distinguish the different proportion of the old frying oil and new edible-oil; on the other hand we use partial least squares (PLS) to predict the blending ratio of the old frying oil and new edible-oil. Two conclusions were proposed: data fusion of electronic nose and electronic tongue can be used to detect the blending ratio of the old frying oil and new edible-oil; in contrast to single used electronic nose or single used electronic tongue, the detection effect has increased by using data fusion of electronic nose and electronic tongue.

[1]  M. Vandecasteele,et al.  Toward a Miniaturized Low-Power Micromechanical Electronic Nose , 2012, IEEE Sensors Journal.

[2]  N. Wang,et al.  Identification Model in Frying Oil Based on Interval Partial Least Squares Regression Analysis , 2013 .

[3]  Simona Benedetti,et al.  Application of the Electronic Nose in Olive Oil Analyses , 2010 .

[4]  Y Vander Heyden,et al.  Gas-chromatographic fatty-acid fingerprints and partial least squares modeling as a basis for the simultaneous determination of edible oil mixtures. , 2005, Talanta.

[5]  Z. Rui.  Distinguishing hogwash oil in edible vegetable oil by determination of cholesterol content , 2006 .

[6]  B. Guamis,et al.  Comparison of ultra high pressure homogenization and conventional thermal treatments on the microbiological, physical and chemical quality of soymilk , 2012 .

[7]  C. Nerín,et al.  Rapid analytical procedure for determination of mineral oils in edible oil by GC-FID. , 2013, Food chemistry.

[8]  Edward M. Fox,et al.  Troubleshooting the environmental source of contamination with Listeria monocytogenes in a typical small food manufacturing plant in Ireland , 2012 .

[9]  Marko Sarstedt,et al.  Partial least squares structural equation modeling (PLS-SEM): A useful tool for family business researchers , 2014 .

[10]  W. Marsden.  I and J , 2012 .

[11]  Rosenberg J. Romero,et al.  Experimental thermodynamic evaluation for a single stage heat transformer prototype build with commercial PHEs , 2015 .

[12]  Yu Xiu-zhu.  Fast Qualitative and Semi-quantitative Analysis of Hogwash Oil by Conductivity , 2011 .

[13]  Wenying Tian,et al.  Development and optimization of an efficient method to detect the authenticity of edible oils , 2013 .

[14]  Tassos G. Karayiannis,et al.  Design of a thermoacoustic heat engine for low temperature waste heat recovery in food manufacturing: A thermoacoustic device for heat recovery , 2014 .

[15]  Xavier Cetó,et al.  Development and application of an electronic tongue for detection and monitoring of nitrate, nitrite and ammonium levels in waters , 2013 .

[16]  J. Koenderink.  Q… , 2014, Les noms officiels des communes de Wallonie, de Bruxelles-Capitale et de la communaute germanophone.

[17]  Sunil K Jha,et al.  Denoising by Singular Value Decomposition and Its Application to Electronic Nose Data Processing , 2011, IEEE Sensors Journal.

[18]  N. Leepipatpiboon,et al.  Low-temperature cleanup with solid-phase extraction for the determination of polycyclic aromatic hydrocarbons in edible oils by reversed phase liquid chromatography with fluorescence detection. , 2013, Food chemistry.

[19]  Xiuzhu Yu,et al.  A novel method for determining peroxide value of edible oils using electrical conductivity , 2014 .

[20]  Niu Qun-feng.  Discrimination of different edible vegetable oils by electronic tongue , 2013 .

[21]  V. Cariou,et al.  Quadratic PLS regression applied to external preference mapping , 2014 .

[22]  M. Nikolaou,et al.  Control of snack food manufacturing systems , 2006, IEEE Control Systems.

[23]  Song Jia-jia.  Study of Phthalates Detection in Oil by Gas Chromatography-mass Spectrometry , 2010 .

[24]  Jun Wang,et al.  Detection of adulteration in camellia seed oil and sesame oil using an electronic nose , 2006 .

[25]  Wang Nian.  Identification model in frying oil based on interval partial least squares regression analysis , 2012 .

[26]  T. K. Dey,et al.  Role of interfacial layer and clustering on the effective thermal conductivity of CuO–gear oil nanofluids , 2011 .

[27]  B. Bouchikhi,et al.  Electronic nose and tongue combination for improved classification of Moroccan virgin olive oil profiles , 2013 .

[28]  B. Saad,et al.  Flow injection determination of free fatty acids in vegetable oils using capacitively coupled contactless conductivity detection. , 2011, Analytica chimica acta.

[29]  Guan Wei.  Rapid Detection of Adulterated Palm Oil in Camellia Seed Oil by Electronic Tongue , 2013 .

[30]  Askar Hamdulla,et al.  Weighted region information entropy and improved genetic algorithm for image retrieval , 2012 .

[31]  Chengjun Liu,et al.  Gabor-based kernel PCA with fractional power polynomial models for face recognition , 2004, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[32]  Qiang Cai,et al.  Rapid Classification of Hairtail Fish and Pork Freshness Using an Electronic Nose Based on the PCA Method , 2011, Sensors.

[33]  Shuijin Hu,et al.  Effect of organic, sustainable, and conventional management strategies in grower fields on soil physical, chemical, and biological factors and the incidence of Southern blight , 2007 .

[34]  J. Hao,et al.  Thermal conductivity and rheological properties of graphite/oil nanofluids , 2012 .

[35]  Z. Pan,et al.  Plasma and hepatic cholesterol-lowering effects of tomato pomace, tomato seed oil and defatted tomato seed in hamsters fed with high-fat diets. , 2013, Food chemistry.

[36]  Koni Grob,et al.  Assurance of compliance within the production chain of food contact materials by good manufacturing practice and documentation ― Part 1: Legal background in Europe and compliance challenges , 2009 .