Glass Imprinting Process for Fabrication of Sub-Wavelength Periodic Structures

Using direct glass imprinting with glassy carbon molds, one-dimensional surface-relief gratings with 500 nm pitch were fabricated on phosphate glasses. The maximum grating height attained in this study was 730 nm, which was formed by pressing at the softening temperature of the glass at a constant pressure of 0.4 kN/cm2. A large area pattern 6 ×6 mm2 with a 350-nm groove depth was also fabricated. Phase retardation of 0.1 λ was attained between transverse electric (TE)- and transverse magnetic (TM)-polarized light in the visible wavelength region. Calculated retardation using a rigorous coupled wave analysis agreed well with the experimental results.

[1]  C. J. Parker,et al.  Precision molded-glass optics. , 1983, Applied optics.

[2]  M. Takahashi,et al.  Nanoimprint of Glass Materials with Glassy Carbon Molds Fabricated by Focused-Ion-Beam Etching , 2004, Digest of Papers. 2004 International Microprocesses and Nanotechnology Conference, 2004..

[3]  B. W. Nicholson,et al.  Optical performance of a diffraction-limited molded-glass biaspheric lens. , 1983, Applied optics.

[4]  Wei Zhang,et al.  Sub-10 nm imprint lithography and applications , 1997, 1997 55th Annual Device Research Conference Digest.

[5]  Stephen Y. Chou,et al.  Imprint of sub-25 nm vias and trenches in polymers , 1995 .

[6]  Hartmut Bartelt,et al.  Diffractive optical isolator made of high-efficiency dielectric gratings only. , 2002, Applied optics.

[7]  Kenji Kintaka,et al.  High-efficiency transmission gratings buried in a fused-SiO2 glass plate. , 2004, Applied optics.

[8]  Masaharu Komori,et al.  Imprinted optical pattern of low-softening phosphate glass. , 2007, Optics letters.

[9]  Hisao Kikuta,et al.  Fabrication of 1∕4 wave plate by nanocasting lithography , 2005 .

[10]  Y. Hirai,et al.  High Aspect Pattern Fabrication by Nano Imprint Lithography Using Fine Diamond Mold , 2002, 2002 International Microprocesses and Nanotechnology Conference, 2002. Digest of Papers..

[11]  H. Kikuta,et al.  Achromatic quarter-wave plates using the dispersion of form birefringence. , 1997, Applied optics.

[12]  M. Hutley,et al.  The Optical Properties of 'Moth Eye' Antireflection Surfaces , 1982 .

[13]  Thomas K. Gaylord,et al.  Stable implementation of the rigorous coupled-wave analysis for surface-relief gratings: enhanced transmittance matrix approach , 1995 .

[14]  G. M. Morris,et al.  Antireflection structured surfaces for the infrared spectral region. , 1993, Applied optics.

[15]  S. Chou,et al.  Sub-10 nm imprint lithography and applications , 1997 .

[16]  Hisao Kikuta,et al.  Fabrication of Microcone Array for Antireflection Structured Surface Using Metal Dotted Pattern , 2001 .