Microstructure and properties stability of Al-alloyed MoSi2 matrix composites

[1]  D. Butt,et al.  Thermal Oxidation Kinetics of MoSi2‐Based Powders , 2004 .

[2]  E. Ström,et al.  Processing, microstructure and properties of C40 Mo(Si,Al)2/Al2O3 composites , 2003 .

[3]  Lin Liu,et al.  Mechanical alloying of refractory metal–silicon systems , 2003 .

[4]  S. Hanada,et al.  Influences of Al content and secondary phase of Mo5(Si,Al)3 on the oxidation resistance of Al-rich Mo(Si,Al)2-base composites , 2003 .

[5]  A. Heron,et al.  Mechanical alloying of MoSi2 with ternary alloying elements. Part 1: Experimental , 2003 .

[6]  E. Ström,et al.  Microstructure, hardness and indentation toughness of high-temperature C40 Mo(Si,Al)2/SiC composites prepared by SPS of MA powders, Materials Letters, Volume 57, Issues 22-23, July 2003, Pages 3387-3391 , 2003 .

[7]  Q. Xue,et al.  Study of wear resistant MoSi2–SiC composites fabricated by self-propagating high temperature synthesis casting , 2003 .

[8]  R. Orrú,et al.  Effect of phase transformation during high energy milling on field activated synthesis of dense MoSi2 , 2003 .

[9]  Z. A. Munir,et al.  Incorporating Mg into the Si sub-lattice of molybdenum disilicide , 2003 .

[10]  E. Ström,et al.  Microstructure, hardness and indentation toughness of C40 Mo(Si,Al)2/ZrO2 composites prepared by SPS of MA powders , 2003 .

[11]  K. Hirota,et al.  Fabrication and mechanical properties of monolithic MoSi2 by spark plasma sintering , 2002 .

[12]  Z. A. Munir,et al.  Dense WSi2 and WSi2–20 vol.% ZrO2 composite synthesized by pressure-assisted field-activated combustion , 2001 .

[13]  G. Shao,et al.  On the oxidation behaviour of MoSi2 , 2001 .

[14]  D. Kim,et al.  The oxidation of Ni3Al containing decomposed SiC-particles , 2001 .

[15]  J. Petrovic.  Toughening strategies for MoSi2-based high temperature structural silicides , 2000 .

[16]  T. Sudarshan,et al.  Molybdenum silicide based materials and their properties , 1999 .

[17]  N. Stoloff.  An overview of powder processing of silicides and their composites , 1999 .

[18]  K. Niihara,et al.  Strong monolithic and composite MoSi2 materials by nanostructure design , 1999 .

[19]  A. K. Vasudevan,et al.  Key developments in high temperature structural silicides , 1999 .

[20]  C. Koch.  Intermetallic matrix composites prepared by mechanical alloying—a review , 1998 .

[21]  T. Maruyama,et al.  High temperature oxidation and pesting of Mo(Si,Al)2 , 1997 .

[22]  J. Petrovic.  Mechanical behavior of MoSi2 and MoSi2 composites , 1995 .

[23]  K. Nagata,et al.  High temperature oxidation of MoSiX intermetallics (X = Al, Ti, Ta, Zr and Y) , 1995 .

[24]  T. Nieh,et al.  Mechanism of MoSi_2 pest during low temperature oxidation , 1993 .

[25]  E. Lee,et al.  Oxidation of MoSi2-based composites , 1992 .

[26]  A. Vasudévan,et al.  A comparative overview of molybdenum disilicide composites , 1992 .

[27]  R. M. Aikin.  Strengthening of discontinuously reinforced MoSi2 composites at high temperatures , 1992 .

[28]  A. Evans.  Perspective on the Development of High‐Toughness Ceramics , 1990 .

[29]  A. Evans,et al.  Microcrack zone formation in single phase polycrystals , 1982 .

[30]  K. Easterling,et al.  Phase Transformations in Metals and Alloys , 2021 .