Simple Sensorless Control of Interior Permanent Magnet Synchronous Motor Using PLL Based on Extended EMF

This paper proposes an improved sensorless control to estimate the rotor position of an interior permanent magnet synchronous motor. A phase-locked loop (PLL) is used to obtain the phase angle of the grid. The rotor position can be estimated using a PLL based on extended electromotive force (EEMF) because the EEMF contains information about the rotor position. The proposed method can reduce the burden of calculation. Therefore, the control period is decreased. The simulation and experimental results confirm the effectiveness and performance of the proposed method.

[1]  Seung-Ki Sul,et al.  High performance PMSM drives without rotational position sensors using reduced order observer , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[2]  June-Seok Lee,et al.  Rotor position estimation method of IPMSM using HF signal injection and sliding-mode controller , 2014 .

[3]  Jingbo Liu,et al.  Rotor Position Estimation for Synchronous Machines Based on Equivalent EMF , 2011, IEEE Transactions on Industry Applications.

[4]  Robert D. Lorenz,et al.  Using on-line parameter estimation to improve efficiency of IPM machine drives , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[5]  Kyo-Beum Lee,et al.  Torque-Ripple Minimization and Fast Dynamic Scheme for Torque Predictive Control of Permanent-Magnet Synchronous Motors , 2015, IEEE Transactions on Power Electronics.

[6]  Robert D. Lorenz,et al.  Rotor position estimation for permanent magnet synchronous motor using saliency-tracking self-sensing method , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[7]  Dianguo Xu,et al.  DSP-Based Control of Sensorless IPMSM Drives for Wide-Speed-Range Operation , 2013, IEEE Transactions on Industrial Electronics.

[8]  Seung-Ki Sul,et al.  Maximum Torque per Ampere (MTPA) Control of an IPM Machine Based on Signal Injection Considering Inductance Saturation , 2013, IEEE Transactions on Power Electronics.

[9]  Long Wu,et al.  An Adaptive Quasi-Sliding-Mode Rotor Position Observer-Based Sensorless Control for Interior Permanent Magnet Synchronous Machines , 2013, IEEE Transactions on Power Electronics.

[10]  Muhammed Fazlur Rahman,et al.  Sensorless Sliding-Mode MTPA Control of an IPM Synchronous Motor Drive Using a Sliding-Mode Observer and HF Signal Injection , 2010, IEEE Transactions on Industrial Electronics.

[11]  Kyo-Beum Lee,et al.  Simple rotor position estimation for sensorless control of IPMSM using PLL based on EEMF , 2016, 2016 IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific).

[12]  M. Sanada,et al.  Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[13]  Kyo-Beum Lee,et al.  Wide-Range Sensorless Control for SPMSM Using an Improved Full-Order Flux Observer , 2015 .

[14]  Derrick Holliday,et al.  Rotor Design for Sensorless Position Estimation in Permanent-Magnet Machines , 2011, IEEE Transactions on Industrial Electronics.

[15]  Shigeru Okuma,et al.  An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors , 2003, IEEE Trans. Ind. Electron..

[16]  F. Blaabjerg,et al.  Combined Flux Observer With Signal Injection Enhancement for Wide Speed Range Sensorless Direct Torque Control of IPMSM Drives , 2008, IEEE Transactions on Energy Conversion.

[17]  Seung-Ki Sul,et al.  Speed control of interior permanent magnet synchronous motor drive for the flux weakening operation , 1997 .