论文信息 - 5mm × 5mm Sized Slug on High Power LED Stress and Junction Temperature Analysis

5mm × 5mm Sized Slug on High Power LED Stress and Junction Temperature Analysis

Conventional incandescent lamps are being replaced by high power light emitting diode as a lighting source due to it ascendancy in terms of physical size, performance, output and lifetime. Nevertheless, the reliability and efficiency of the LED is dependent on the junction temperature. This study presents the thermal simulation of single chip LED package with 5mm x5mmx 1mm aluminum heat slug. The junction temperature and stress of LED chip were evaluated using Ansys version 11. Input power of 0.1 W and 1 W were applied to the LED. The simulation results showed that at input power of 1W, the maximum junction temperature and stress of the LED chip is 112.91°C and 263.82Mpa respectively.

[1] Steven Taniselass,et al. Wire Bond Shear Test Simulation on Sharp Groove Surface Bond Pad , 2012 .

[2] V. Retnasamy,et al. Gold Ball Shear Stress Analysis on Different Surface Morphology , 2012, 2012 Fourth International Conference on Computational Intelligence, Modelling and Simulation.

[3] Suyi Huang,et al. Thermal analysis and optimization of multiple LED packaging based on a general analytical solution , 2009, 2009 59th Electronic Components and Technology Conference.

[4] Sun Ho Jang,et al. Thermal analysis of high power LED packages under the alternating current operation , 2012 .

[5] Liang Jin,et al. Analysis of Thermal Field on Integrated LED Light Source Based on COMSOL Multi-physics Finite Element Simulation , 2011 .

[6] N. Narendran,et al. Life of LED-based white light sources , 2005, Journal of Display Technology.

[7] Steven Taniselass,et al. Polymer Core BGA Stress Analysis at Minimal Vertical Loading , 2012 .

[8] Michael S. Shur,et al. Solid-State Lighting: Toward Superior Illumination , 2005, Proceedings of the IEEE.

[9] Chun-Jen Weng,et al. Advanced thermal enhancement and management of LED packages , 2009 .