Air blast resistance of full-scale slabs with different compositions: Numerical modeling and field validation

Abstract This paper investigates the advantages and accuracy of a finite element simulation of a blast loaded full-scale slab by validating the results with the corresponding field tests. For this modeling, a 3D pure Lagrangian approach using LS-DYNA with appropriate blast load routine (CONWEP), material models and suitable boundary conditions is developed. Eight full-scale slabs were cast and tested. Three standard reinforced concrete slabs with the explosive at a scaled distance of 0.79 m/kg1/3 were used to calibrate the numerical model. Two normal reinforced concrete (RC) slabs with the explosive charges located at scaled distances of 0.41 and 0.20 m/kg1/3, and three more with different constructive solutions, such as fiber reinforced concrete (steel and polypropylene fibers) or reinforced concrete protected with a steel sheet at the center of the slab, aim to study the sensitivity of the model to these changes. Field data obtained with accelerometers and pressure transducers are compared with results obtained from the numerical modeling for the calibration tests. For the others, the results from numerical model match those from field blast tests in terms of damage pattern and percentage of surface damage. The model is sensitive to the effect of scaled distance (explosive at lower scaled distance produced higher surface damage and different fracture patterns) and to different construction patterns. Reinforced concrete slabs with steel or polypropylene fibers had better blast resistance under tensile stress (bottom part of the slabs) than simple reinforced concrete. The slab with the steel sheet on top had higher surface damage on both faces than the others for the same scaled distance.

[1]  L. Javier Malvar,et al.  SIMPLIFIED CONCRETE MODELING WITH *MAT_CONCRET_DAMAGE_REL3 , 2005 .

[2]  Hsuan-Teh Hu,et al.  Dynamic response of a reinforced concrete slab subjected to air blast load , 2011 .

[3]  Xiaoshan Lin,et al.  Modelling the response of reinforced concrete panels under blast loading , 2014 .

[4]  Chris P. Pantelides,et al.  Reinforced concrete and fiber reinforced concrete panels subjected to blast detonations and post-blast static tests , 2014 .

[5]  Yvonne D Murray,et al.  Users Manual for LS-DYNA Concrete Material Model 159 , 2007 .

[6]  Hugo Sol,et al.  Numerical simulation and experimental validation of the dynamic response of aluminum plates under free air explosions , 2013 .

[7]  Jason Baird,et al.  Experimental and numerical analyses of long carbon fiber reinforced concrete panels exposed to blast loading , 2013 .

[8]  John Hetherington,et al.  Blast and ballistic loading of structures , 1994 .

[9]  Andrew M Coughlin.  Contact Charge Blast Performance of Fiber Reinforced and Polyurea Coated Concrete Vehicle Barriers , 2008 .

[10]  Daniel G. Linzell,et al.  Behavior of portable fiber reinforced concrete vehicle barriers subject to blasts from contact charges , 2010 .

[11]  H. Brode.  Blast Wave from a Spherical Charge , 1959 .

[13]  W. E. Baker.  Explosions in air , 1973 .

[14]  Hong Hao,et al.  Numerical prediction of concrete slab response to blast loading , 2008 .

[15]  J. Magallanes,et al.  Importance of Concrete Material Characterization and Modelling to Predicting the Response of Structures to Shock and Impact Loading , 2008 .

[16]  Gabi Ben-Dor,et al.  Full-scale field tests of concrete slabs subjected to blast loads , 2008 .

[17]  T. Krauthammer.  Modern Protective Structures , 2008 .

[18]  Jing Zhang,et al.  BEHAVIOR OF HYBRID-FIBER ENGINEERED CEMENTITIOUS COMPOSITES SUBJECTED TO DYNAMIC TENSILE LOADING AND PROJECTILE IMPACT , 2005 .

[19]  Sam E. Rigby,et al.  Elastic-plastic response of plates subjected to cleared blast loads , 2014 .

[20]  N. Gebbeken,et al.  On the safety and reliability of high dynamic hydrocode simulations , 1999 .

[21]  T. Børvik,et al.  Response of structures to planar blast loads - A finite element engineering approach , 2009 .

[22]  Tuan Ngo,et al.  Blast Loading and Blast Effects on Structures – An Overview , 2007, Electronic Journal of Structural Engineering.

[23]  N. Yusof,et al.  Evaluation of normal and nanolayer composite thermal barrier coatings in fused vanadate-sulfate salts at 1000°C , 2013 .

[24]  Wei Wang,et al.  Experimental study and numerical simulation of the damage mode of a square reinforced concrete slab under close-in explosion , 2013 .

[25]  R. Brannon,et al.  Survey of Four Damage Models for Concrete , 2009 .

[26]  J. Y. Chen,et al.  Damage mechanism and mode of square reinforced concrete slab subjected to blast loading , 2013 .

[27]  N. Uddin.  Blast protection of civil infrastructures and vehicles using composites , 2010 .

[28]  Pedro F. Silva,et al.  Improving the blast resistance capacity of RC slabs with innovative composite materials , 2007 .

[29]  Marek Foglar,et al.  Conclusions from experimental testing of blast resistance of FRC and RC bridge decks , 2013 .

[30]  Chengqing Wu,et al.  A finite element modelling to investigate the mitigation of blast effects on reinforced concrete panel using foam cladding , 2013 .

[31]  Constantinos Soutis,et al.  Modelling the structural response of GLARE panels to blast load , 2011 .

[32]  Marek Foglar,et al.  Numerical and Experimental Analysis of the Effect of Rigid Barriers on Blast Wave Propagation , 2015 .

[33]  A. Razaqpur,et al.  Blast loading response of reinforced concrete panels reinforced with externally bonded GFRP laminates , 2007 .

[34]  Jian fei Chen,et al.  Blast resistance of FRP composites and polymer strengthened concrete and masonry structures - A state-of-the-art review , 2007 .

[35]  Wensu Chen,et al.  Numerical study of a new multi-arch double-layered blast-resistance door panel , 2012 .

[36]  Peter Svantesson,et al.  Simulations of the response of concrete structures subjected to air blasts , 2013 .

[37]  Norazman Mohamad Nor,et al.  Performance of Hybrid Steel Fibers Reinforced Concrete Subjected to Air Blast Loading , 2013 .

[38]  Liang Huang,et al.  Blast Testing of Aluminum Foam–Protected Reinforced Concrete Slabs , 2011 .

[39]  Yong Lu,et al.  Evaluation of typical concrete material models used in hydrocodes for high dynamic response simulations , 2009 .

[40]  G. Schleyer,et al.  Numerical simulation of ultra high performance fibre reinforced concrete panel subjected to blast loading , 2014 .

[41]  Robert M. Koerner,et al.  Designing with Geosynthetics , 1986 .

[42]  Ganesh Thiagarajan,et al.  Experimental and finite element analysis of doubly reinforced concrete slabs subjected to blast loads , 2015 .

[43]  Zhi-liang Wang,et al.  Attenuation effect of artificial cavity on air-blast waves in an intelligent defense layer , 2006 .

[44]  Jun Wu,et al.  Field performance and numerical modeling of multi-layer pavement system subject to blast load , 2014 .