Shadowing compensator for grid-connected photovoltaic generation system

The solar cell array may shade or partially shade. The maximum output current of the shaded or partially shaded solar cells is smaller than that of un-shaded solar cells, and it depends on the degree of shadowing. This can cause multiple peaks in the power-voltage (P-V) curve for the solar cell array and increases the difficultly of maximum power point tracking in the photovoltaic generation system. A shadowing compensator for the grid-connected photovoltaic generation system is proposed in this paper. This shadowing compensator uses a multi-winding fly-back DC-DC converter. The shadowing compensator supplies compensating power to the shaded or partially shaded solar cells to sustain their voltage, so the solar cell array avoids multiple peaks in the P-V curve for the solar cell array and can easily trace the maximum output power. Computer simulation is used to verify the performance of the proposed shadowing compensator. The simulation results are as expected.

[1]  B. Bose,et al.  Global Warming: Energy, Environmental Pollution, and the Impact of Power Electronics , 2010, IEEE Industrial Electronics Magazine.

[2]  S. Elorduizapatarietxe,et al.  Intelligent PV module for grid-connected PV systems , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[3]  Xi Chen,et al.  A novel solar panel optimizer with self-compensation for partial shadow condition , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[4]  Bangyin Liu,et al.  Photovoltaic DC-Building-Module-Based BIPV System—Concept and Design Considerations , 2011, IEEE Transactions on Power Electronics.

[5]  G. Champenois,et al.  Nondissipative String Current Diverter for Solving the Cascaded DC–DC Converter Connection Problem in Photovoltaic Power Generation System , 2012, IEEE transactions on power electronics.

[6]  Gehan A. J. Amaratunga,et al.  Long-Lifetime Power Inverter for Photovoltaic AC Modules , 2008, IEEE Transactions on Industrial Electronics.

[7]  Bangyin Liu,et al.  Design considerations and topology selection for dc-module-based building integrated photovoltaic system , 2008, 2008 3rd IEEE Conference on Industrial Electronics and Applications.

[8]  Francesc Guinjoan,et al.  Energy-Balance Modeling and Discrete Control for Single-Phase Grid-Connected PV Central Inverters , 2008, IEEE Transactions on Industrial Electronics.

[9]  V. Agarwal,et al.  MATLAB-Based Modeling to Study the Effects of Partial Shading on PV Array Characteristics , 2008, IEEE Transactions on Energy Conversion.

[10]  Toshihisa Shimizu,et al.  Generation control circuit for photovoltaic modules , 2001 .

[11]  Toshihiko Noguchi,et al.  Short-current pulse-based maximum-power-point tracking method for multiple photovoltaic-and-converter module system , 2002, IEEE Trans. Ind. Electron..

[12]  Bertrand Raison,et al.  A Power Electronics Equalizer Application for Partially Shaded Photovoltaic Modules , 2013, IEEE Transactions on Industrial Electronics.

[13]  Stephen J. Finney,et al.  A Maximum Power Point Tracking Technique for Partially Shaded Photovoltaic Systems in Microgrids , 2013, IEEE Transactions on Industrial Electronics.

[14]  T. Hiyama,et al.  Power Controller Design for Photovoltaic Generation System under Partially Shaded Insolation Conditions , 2007, 2007 International Conference on Intelligent Systems Applications to Power Systems.

[15]  Saifur Rahman,et al.  Green power: What is it and where can we find it? , 2003 .

[16]  S. Valkealahti,et al.  Power Losses in Long String and Parallel-Connected Short Strings of Series-Connected Silicon-Based Photovoltaic Modules Due to Partial Shading Conditions , 2012, IEEE Transactions on Energy Conversion.

[17]  P. T. Krein,et al.  Comparative analysis of differential power conversion architectures and controls for solar photovoltaics , 2012, 2012 IEEE 13th Workshop on Control and Modeling for Power Electronics (COMPEL).

[18]  Hurng-Liahng Jou,et al.  Ripple voltage suppression method for DC/DC boost converter of the grid-connected renewable power generation system , 2008, 2008 IEEE International Conference on Sustainable Energy Technologies.

[19]  Pedro Ibañez,et al.  Analysis of Inverter-Voltage Influence on Distributed MPPT Architecture Performance , 2012, IEEE Transactions on Industrial Electronics.

[20]  H. Calleja,et al.  Reliability: A New Approach in Design of Inverters for PV Systems , 2006, 2006 IEEE International Power Electronics Congress.

[21]  Constantinos Sourkounis,et al.  Multi-tracking single-fed PV inverter , 2010, Melecon 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference.