Motion/Force Transmission Analysis of Planar Parallel Mechanisms With Closed-Loop Subchains

Singularities are one of the most important issues affecting the performance of parallel mechanisms. Therefore, analysis of their locations and closeness is essential for the development of a high-performance mechanism. The screw theory based motion/force transmission analysis provides such a closeness measure in terms of the work performed between specific mechanism twists and wrenches. As such, this technique has been applied to many serial chain parallel mechanisms. However, the motion/force transmission performance of parallel mechanisms with mixed topology chains is yet to be examined. These chains include linkages in both series and parallel, where the parallel portion is termed a closed-loop subchain (CLSC). This paper provides an analysis of such chains, where the CLSC is a planar four-bar linkage. In order to completely define the motion/force transmission abilities of these mechanisms, adapted wrench definitions are introduced. The proposed methodology is applied to a family of two degrees-of-freedom planar axis-symmetric parallel mechanisms, each with a different CLSC configuration. The presented analysis provides the first complete motion/force transmission analysis of such mechanisms.

[1]  J. Angeles,et al.  Generalized transmission index and transmission quality for spatial linkages , 2007 .

[2]  C. Barus.  A treatise on the theory of screws , 1998 .

[3]  T. P. Goodman,et al.  Kinematics and Linkage Design , 1986 .

[4]  M. T. Masouleh,et al.  Singularity Conditions of 3T1R Parallel Manipulators with Identical Limb Structures , 2012 .

[5]  Saeid Nahavandi,et al.  Analysis of the inverse kinematics problem for 3-DOF axis-symmetric parallel manipulators with parasitic motion , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[6]  J. R. Jones,et al.  Null–space construction using cofactors from a screw–algebra context , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[7]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[8]  Saeid Nahavandi,et al.  Workspace analysis of two similar 3-DOF axis-symmetric parallel manipulators , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  Hairong Fang,et al.  Reciprocal screw theory based singularity analysis of a novel 3-DOF parallel manipulator , 2012 .

[10]  Clément Gosselin,et al.  Workspace and Sensitivity Analysis of a Novel Nonredundant Parallel SCARA Robot Featuring Infinite Tool Rotation , 2016, IEEE Robotics and Automation Letters.

[11]  P. Wenger,et al.  Constraint and Singularity Analysis of Lower-Mobility Parallel Manipulators With Parallelogram Joints , 2010 .

[12]  Jian S. Dai,et al.  From Origami to a New Class of Centralized 3-DOF Parallel Mechanisms , 2007 .

[13]  Atsushi Konno,et al.  SINGULARITY ANALYSIS OF A NOVEL 4-DOFS PARALLEL ROBOT H4 BY USING SCREW THEORY , 2003, DAC 2003.

[14]  Clément Gosselin,et al.  Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator , 2000 .

[15]  Mats Isaksson,et al.  Workspace Analysis of a Novel Six-Degrees-of-Freedom Parallel Manipulator With Coaxial Actuated Arms , 2013 .

[16]  Bernard Roth,et al.  A Transmission Index for Spatial Mechanisms , 1973 .

[17]  D. Chetwynd,et al.  A Dual Space Approach for Force/Motion Transmissibility Analysis of Lower Mobility Parallel Manipulators , 2015 .

[18]  J. Dai,et al.  Geometric Analysis of Overconstrained Parallel Manipulators with Three and Four Degrees of Freedom , 2002 .

[19]  Ming-June Tsai,et al.  The Transmissivity and Manipulability of Spatial Mechanisms , 1994 .

[20]  Gordon R. Pennock,et al.  Theory of Machines and Mechanisms , 1965 .

[21]  Satish Chand,et al.  Transmission angle in mechanisms (Triangle in mech) , 2002 .

[22]  K. H. Hunt,et al.  Kinematic geometry of mechanisms , 1978 .

[23]  J. Plücker,et al.  Neue Geometrie des Raumes : gegründet auf die Betrachtung der geraden Linie als Raumelement , 1868 .

[24]  Jianguo Zhao,et al.  Geometrical method to determine the reciprocal screws and applications to parallel manipulators , 2009, Robotica.

[25]  Q. C. Li,et al.  General Methodology for Type Synthesis of Symmetrical Lower-Mobility Parallel Manipulators and Several Novel Manipulators , 2002, Int. J. Robotics Res..

[26]  Chao Wu,et al.  Performance evaluation of parallel manipulators: Motion/force transmissibility and its index , 2010 .

[27]  Mats Isaksson.  A family of planar parallel manipulators , 2011, 2011 IEEE International Conference on Robotics and Automation.

[28]  Jian S. Dai,et al.  Interrelationship between screw systems and corresponding reciprocal systems and applications , 2001 .

[29]  Chao Chen,et al.  Evaluation of Force/Torque Transmission Quality for Parallel Manipulators , 2015 .

[30]  Jinsong Wang,et al.  A New Approach for Singularity Analysis and Closeness Measurement to Singularities of Parallel Manipulators , 2012 .

[31]  Damien Chablat,et al.  Kinematic Analysis of a New Parallel Machine Tool: the Orthoglide , 2007, ArXiv.

[32]  Geir Hovland,et al.  The Tau PKM Structures , 2008 .

[33]  Xin-Jun Liu,et al.  Motion/Force Constrainability Analysis of Lower-Mobility Parallel Manipulators , 2014 .