Recent Advancements in the Natural Fiber‐Reinforced Polymer Composites

[1]  A. Ragauskas,et al.  Recent advancements of plant-based natural fiber–reinforced composites and their applications , 2020 .

[2]  H. Bian,et al.  Effect of Silane Coupling Agent on Modification of Areca Fiber/Natural Latex , 2020, Materials.

[3]  Chethana Mudenur,et al.  4. Nanocellulose: surface modification strategies , 2020 .

[4]  R. Sonnier,et al.  Toward the cottonization of hemp fibers by steam explosion. Flame-retardant fibers , 2020 .

[5]  Syed Muhammad Arafat,et al.  Comparative experimental investigation of natural fibers reinforced light weight concrete as thermally efficient building materials , 2020, Journal of Building Engineering.

[6]  D. Zou,et al.  Multiscale investigation on tensile properties of ultra-high performance concrete with silane coupling agent modified steel fibers , 2020 .

[7]  A. Mele,et al.  An Integrated Approach to Optimizing Cellulose Mercerization , 2020, Polymers.

[8]  F. Hernández-Olivares,et al.  Short sugarcane bagasse fibers cementitious composites for building construction , 2020 .

[9]  V. Guna,et al.  Hybrid biocomposites , 2020, Indian Journal of Fibre & Textile Research.

[10]  Z. A. Rasid,et al.  Mercerization Optimization of Bamboo (Bambusa vulgaris) Fiber-Reinforced Epoxy Composite Structures Using a Box–Behnken Design , 2020, Polymers.

[11]  B. Wang,et al.  A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites: The liquid-phase oxidation followed by grafting of silane coupling agent , 2020, Composites Part B: Engineering.

[12]  S. Madasamy,et al.  Fabrication of Automobile Component Using Hybrid Natural Fiber Reinforced Polymer Composite , 2020, Journal of Natural Fibers.

[13]  Dawei Zhang,et al.  Structural behaviour of pre-damaged reinforced concrete beams strengthened with natural fibre reinforced polymer composites , 2020 .

[14]  M. Tajvidi,et al.  Mechanical and thermal behavior of cellulose nanocrystals-incorporated Acrodur® sustainable hybrid composites for automotive applications , 2020 .

[15]  M. Ismael,et al.  Assessment of Moisture Susceptibility for Asphalt Mixtures Modified by Carbon Fibers , 2020 .

[16]  A. Pizzi,et al.  Ionic liquid- modified lignin as a bio- coupling agent for natural fiber- recycled polypropylene composites , 2020 .

[17]  Jayakrishna Kandasamy,et al.  Pineapple Leaf Fibres for Automotive Applications , 2020 .

[18]  S. Ramakrishna,et al.  3D Printing of polymer composites: A short review , 2019, Material Design & Processing Communications.

[19]  Ravinder Kumar,et al.  Critical Overview of Coatings Technology for Metal Matrix Composites , 2019, Journal of Bio- and Tribo-Corrosion.

[20]  S. Dhakate,et al.  Multi-component framework derived SiC composite paper to support efficient thermal transport and high EMI shielding performance , 2019, Composites Part B: Engineering.

[21]  L. Love,et al.  High modulus biocomposites via additive manufacturing: Cellulose nanofibril networks as “microsponges” , 2019, Composites Part B: Engineering.

[22]  A. Tyagi,et al.  Surface Modification of Jute Fabric by Treating with Silane Coupling Agent for Reducing Its Moisture Regain Characteristics , 2019, Journal of Natural Fibers.

[23]  Francesco Mollica,et al.  FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties , 2019, Polymers.

[24]  L. Lona,et al.  Polymer Composites Reinforced with Natural Fibers and Nanocellulose in the Automotive Industry: A Short Review , 2019, Journal of Composites Science.

[25]  A. Leszczyńska,et al.  Surface Modification of Cellulose Nanocrystals with Succinic Anhydride , 2019, Polymers.

[26]  G. Ziegmann,et al.  Models of flow behaviour and fibre distribution of injected moulded polypropylene reinforced with natural fibre composites , 2019, Composites Part B: Engineering.

[27]  S. Siengchin,et al.  A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization. , 2019, Carbohydrate polymers.

[28]  S. Srivastava,et al.  Tensile and flexural properties of natural fiber reinforced polymer composites: A review , 2018, Journal of Reinforced Plastics and Composites.

[29]  M. Venkataraman,et al.  Influence of structural parameters on thermal performance of polypropylene nonwovens , 2018, Polymers for Advanced Technologies.

[30]  Yu Yan,et al.  Laboratory Investigation on the Use of Bamboo Fiber in Asphalt Mixtures for Enhanced Performance , 2018, Arabian Journal for Science and Engineering.

[31]  M. K. Lila,et al.  A recyclability study of bagasse fiber reinforced polypropylene composites , 2018, Polymer Degradation and Stability.

[32]  Yoshikuni Teramoto,et al.  Recent Advances in Nanocellulose Composites with Polymers: A Guide for Choosing Partners and How to Incorporate Them , 2018, Polymers.

[33]  M. Collins,et al.  Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing , 2018 .

[34]  Minhao Zhu,et al.  Properties of natural fibre composites for structural engineering applications , 2018 .

[35]  Masahiro Arai,et al.  Overview of automotive structural composites technology developments in Japan , 2018 .

[36]  V. J. Segui,et al.  Processing and Characterization of Environmentally Friendly Composites from Biobased Polyethylene and Natural Fillers from Thyme Herbs , 2018, Journal of Polymers and the Environment.

[37]  Xiaohong Qin,et al.  Review of the applications of biocomposites in the automotive industry , 2017 .

[38]  Omer Berk Berkalp,et al.  The effect of hybridization on significant characteristics of jute/glass and jute/carbon-reinforced composites , 2017 .

[39]  A. Gibson,et al.  Effect of water absorption on the mechanical properties of hybrid interwoven cellulosic-cellulosic fibre reinforced epoxy composites , 2017 .

[40]  Laura Tomppo,et al.  A review on new bio-based constituents for natural fiber-polymer composites , 2017 .

[41]  Jung-Il Song,et al.  Current advances in the fire retardancy of natural fiber and bio-based composites – A review , 2017 .

[42]  I. Singh,et al.  Processing of PLA/sisal fiber biocomposites using direct- and extrusion-injection molding , 2017 .

[43]  H. Ning,et al.  Hemp fiber reinforced polypropylene composites: The effects of material treatments , 2017 .

[44]  W. Hall,et al.  Consolidation process boundaries of the degradation of mechanical properties in compression moulding of natural-fibre bio-polymer composites , 2017 .

[45]  Yu. V. Voznyak,et al.  New approach to production of fiber reinforced polymer hybrid composites , 2017 .

[46]  Adrian Wilson,et al.  Vehicle weight is the key driver for automotive composites , 2017 .

[47]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[48]  A. Bismarck,et al.  Plant fibre-reinforced polymers: where do we stand in terms of tensile properties? , 2017 .

[49]  Yasir Nawab,et al.  Hydrophobic treatment of natural fibers and their composites—A review , 2018 .

[50]  H. Takagi,et al.  Tensile and flexural properties of polylactic acid-based hybrid green composites reinforced by kenaf, bamboo and coir fibers , 2016 .

[51]  J. Keum,et al.  Polymer matrix nanocomposites for automotive structural components. , 2016, Nature nanotechnology.

[52]  A. El‐Sabbagh,et al.  Development of natural fiber/engineering plastics composites with flame retardance properties , 2016 .

[53]  M. Karahan,et al.  Static and Dynamic Mechanical Properties of Cotton/Epoxy Green Composites , 2016 .

[54]  W. Srubar,et al.  Experimental and theoretical investigation of prestressed natural fiber-reinforced polylactic acid (PLA) composite materials , 2016 .

[55]  E. Abraham,et al.  Nanocellulose, a tiny fiber with huge applications. , 2016, Current opinion in biotechnology.

[56]  C. Nicolae,et al.  Influence of hemp fibers with modified surface on polypropylene composites , 2016 .

[57]  A. Sato,et al.  Surface modification of cellulose nanofibers with alkenyl succinic anhydride for high-density polyethylene reinforcement , 2016 .

[58]  H. Heim,et al.  Influence of the process parameters on the mechanical properties of engineering biocomposites using a twin-screw extruder , 2016 .

[59]  K. Palanikumar,et al.  Influence of fiber orientation and fiber content on properties of sisal‐jute‐glass fiber‐reinforced polyester composites , 2016 .

[60]  S. Sapuan,et al.  Effect of fibre orientations on the mechanical properties of kenaf–aramid hybrid composites for spall-liner application , 2016 .

[61]  A. Gibson,et al.  Mechanical properties of Napier grass fibre/polyester composites , 2016 .

[62]  B. Ramnath,et al.  Effect of Fiber Orientation and Stacking Sequence on Mechanical and Thermal Characteristics of Banana-Kenaf Hybrid Epoxy Composite , 2017, Silicon.

[63]  D. Bhattacharyya,et al.  Fiber dispersion during compounding/injection molding of PP/kenaf composites: Flammability and mechanical properties , 2015 .

[64]  L. Abdullah,et al.  A Review of Natural Fiber Reinforced Poly(Vinyl Alcohol) Based Composites: Application and Opportunity , 2015 .

[65]  TibbitsSkylar,et al.  3D-Printed Wood: Programming Hygroscopic Material Transformations , 2015 .

[66]  Z. Zhong,et al.  A micromechanical model for the mechanical degradation of natural fiber reinforced composites induced by moisture absorption , 2015 .

[67]  A. Dufresne,et al.  Bio-based polyurethane reinforced with cellulose nanofibers: a comprehensive investigation on the effect of interface. , 2015, Carbohydrate polymers.

[68]  J. Benezet,et al.  Reprocessing of wood flour reinforced polypropylene composites: Impact of particle size and coupling agent on composite and particle properties , 2015 .

[69]  F. J. Fuentes-Talavera,et al.  Self-hybridization and Coupling Agent Effect on the Properties of Natural Fiber/HDPE Composites , 2015, Journal of Polymers and the Environment.

[70]  Krishnan A. Iyer,et al.  Cellulose nanocrystal/polyolefin biocomposites prepared by solid- state shear pulverization: Superior dispersion leading to synergistic property enhancements , 2015 .

[71]  H. Choi,et al.  A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties , 2015 .

[72]  Kristiina Oksman,et al.  On the use of nanocellulose as reinforcement in polymer matrix composites , 2014 .

[73]  Karsten Schlesier,et al.  Process-controlled optimization of the tensile strength of bamboo fiber composites for structural applications , 2014 .

[74]  Yentl Swolfs,et al.  Fibre hybridisation in polymer composites: a review , 2014 .

[75]  D. Rodrigue,et al.  Effect of hybridization on the physical and mechanical properties of high density polyethylene-(pine/agave) composites , 2014 .

[76]  H. Fischer,et al.  Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eucalyptus globulus lignin , 2014 .

[77]  Y. Wan,et al.  Mechanical and thermo-mechanical behaviors of sizing-treated corn fiber/polylactide composites , 2014 .

[78]  Vijay Kumar Thakur,et al.  Processing and characterization of natural cellulose fibers/thermoset polymer composites. , 2014, Carbohydrate polymers.

[79]  B. Vijaya Ramnath,et al.  Determination of mechanical properties of intra-layer abaca-jute-glass fiber reinforced composite , 2014 .

[80]  B. Vijaya Ramnath,et al.  Evaluation of mechanical and thermal properties of banana-flax based natural fibre composite , 2014 .

[81]  J. Benezet,et al.  Rice and Einkorn wheat husks reinforced poly(lactic acid) (PLA) biocomposites: Effects of alkaline and silane surface treatments of husks , 2014 .

[82]  Vincenzo Fiore,et al.  Effects of natural fibres reinforcement in lime plasters (kenaf and sisal vs. Polypropylene) , 2014 .

[83]  C. Baley,et al.  Average tensile properties of French elementary flax fibers , 2014 .

[84]  Q. Fu,et al.  Enhanced interfacial adhesion via interfacial crystallization between sisal fiber and isotactic polypropylene: direct evidence from single‐fiber fragmentation testing , 2014 .

[85]  A. D. Azzahari,et al.  Effects of extrusion temperature on the rheological, dynamic mechanical and tensile properties of kenaf fiber/HDPE composites , 2014 .

[86]  G. Ziegmann,et al.  Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution , 2014 .

[87]  M. Ramesh,et al.  Processing and Mechanical Property Evaluation of Banana Fiber Reinforced Polymer Composites , 2014 .

[88]  E. Jayamani,et al.  Investigation of Fiber Surface Treatment on Mechanical, Acoustical and Thermal Properties of Betelnut Fiber Polyester Composites , 2014 .

[89]  P. Chumsamrong,et al.  The Effects of Alkalized and Silanized Woven Sisal Fibers on Mechanical Properties of Natural Rubber Modified Epoxy Resin , 2014 .

[90]  J. Benezet,et al.  Study of the interface in natural fibres reinforced poly(lactic acid) biocomposites modified by optimized organosilane treatments , 2014 .

[91]  A. Asiri,et al.  Mechanical, thermal, and morphological properties of nanocomposites based on polyvinyl alcohol and cellulose nanofiber from aloe vera rind , 2014 .

[92]  Yan Li,et al.  Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites , 2013 .

[93]  J. Njuguna,et al.  Recent Development of Flax Fibres and Their Reinforced Composites Based on Different Polymeric Matrices , 2013, Materials.

[94]  P. Herrera-Franco,et al.  Effect of fiber surface treatments on the essential work of fracture of HDPE-continuous henequen fiber-reinforced composites , 2013 .

[95]  B. F. Yousif,et al.  In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibres , 2013 .

[96]  Nasim Uddin,et al.  Developments in Fiber-Reinforced Polymer (FRP) Composites for Civil Engineering , 2013 .

[97]  M. AlMaadeed,et al.  Effect of chain structure on the properties of Glass fibre/polyethylene composites , 2013 .

[98]  A. Perumal,et al.  Fiber surface treatment and its effect on mechanical and visco-elastic behaviour of banana/epoxy composite , 2013 .

[99]  B. F. Yousif,et al.  A review on the degradability of polymeric composites based on natural fibres , 2013 .

[100]  D. Acierno,et al.  Tailoring the flame retardant and mechanical performances of natural fiber-reinforced biopolymer by multi-component laminate , 2013 .

[101]  R. Bouhfid,et al.  Mechanical and thermal properties of natural fibers reinforced polymer composites: Doum/low density polyethylene , 2013 .

[102]  Arlindo Silva,et al.  Green composites: A review of adequate materials for automotive applications , 2013 .

[103]  L. Boopathi,et al.  Investigation of physical, chemical and mechanical properties of raw and alkali treated Borassus fruit fiber , 2012 .

[104]  A. Błędzki,et al.  Biocomposites reinforced with natural fibers: 2000–2010 , 2012 .

[105]  I. Low,et al.  Characterisation of the water absorption, mechanical and thermal properties of recycled cellulose fibre reinforced vinyl-ester eco-nanocomposites , 2012 .

[106]  Hao Wang,et al.  Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview , 2012 .

[107]  A. Hidayat,et al.  Characterization of polylactic acid (PLA)/kenaf composite degradation by immobilized mycelia of Pleurotus ostreatus , 2012 .

[108]  Liping He,et al.  A method for determining reactive hydroxyl groups in natural fibers: application to ramie fiber and its modification. , 2012, Carbohydrate research.

[109]  H. Khalil,et al.  Green composites from sustainable cellulose nanofibrils: A review , 2012 .

[110]  R. Pasricha,et al.  Carbon nanotubes: Amino functionalization and its application in the fabrication of Al-matrix composites , 2012 .

[111]  Hota V. S. GangaRao,et al.  Critical review of recent publications on use of natural composites in infrastructure , 2012 .

[112]  Valdir Soldi,et al.  Influence of fiber surface treatment and length on physico-chemical properties of short random banana fiber-reinforced castor oil polyurethane composites , 2011 .

[113]  Hao Wang,et al.  A review on the tensile properties of natural fiber reinforced polymer composites , 2011 .

[114]  I. Rajendran,et al.  The mechanical properties, deformation and thermomechanical properties of alkali treated and untreated Agave continuous fibre reinforced epoxy composites , 2011 .

[115]  J. Lim,et al.  Effects of diammonium phosphate on the flammability and mechanical properties of bio-composites , 2011 .

[116]  Amiya R Mohanty,et al.  Acoustical and fire-retardant properties of jute composite materials , 2011 .

[117]  Balbir Singh Kaith,et al.  Cellulose Fibers: Bio- and Nano-Polymer Composites , 2011 .

[118]  S. Panigrahi,et al.  Oil palm fiber (OPF) and its composites: A review , 2011 .

[119]  Abdullah Al Mamun,et al.  Polypropylene composites with enzyme modified abaca fibre , 2010 .

[120]  Mohammad S. Islam,et al.  Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites , 2010 .

[121]  K. Xie,et al.  Surface modification of cellulose with triazine derivative to improve printability with reactive dyes , 2009 .

[122]  Lei Song,et al.  Combustion properties and thermal degradation behavior of polylactide with an effective intumescent flame retardant , 2009 .

[123]  J. Bonnet,et al.  Influence of various chemical treatments on the composition and structure of hemp fibres , 2008 .

[124]  Sabu Thomas,et al.  Effect of chemical modification on properties of hybrid fiber biocomposites , 2008 .

[125]  M. John,et al.  Recent Developments in Chemical Modification and Characterization of Natural Fiber-Reinforced Composites , 2008 .

[126]  B. Schartel,et al.  Mechanical, thermal, and fire behavior of bisphenol a polycarbonate/multiwall carbon nanotube nanocomposites , 2008 .

[127]  F. Vilaseca,et al.  Chemical modification of jute fibers for the production of green-composites. , 2007, Journal of hazardous materials.

[128]  L. Tabil,et al.  Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review , 2007 .

[129]  Hans-Peter Fink,et al.  Novel Thermoplastic Composites from Commodity Polymers and Man‐Made Cellulose Fibers , 2006 .

[130]  Jim Holbery,et al.  Natural-fiber-reinforced polymer composites in automotive applications , 2006 .

[131]  H. Fink,et al.  Novel cellulose fibre reinforced thermoplastic materials , 2006 .

[132]  Fernando G. Torres,et al.  Study of the interfacial properties of natural fibre reinforced polyethylene , 2005 .

[133]  E. Frollini,et al.  Sugar cane bagasse and curaua lignins oxidized by chlorine dioxide and reacted with furfuryl alcohol: characterization and stability , 2004 .

[134]  Richard P. Wool,et al.  Natural fiber composites with plant oil-based resin , 2004 .

[135]  Manjusri Misra,et al.  Surface modifications of natural fibers and performance of the resulting biocomposites: An overview , 2001 .

[136]  C. Hansen,et al.  The Ultrastructure of Wood from a Solubility Parameter Point of View , 1998 .