Interfacial reactions and mechanical properties of SiC fiber reinforced Ti3SiC2 and Ti3(SiAl)C2 composites

[1]  N. Ni,et al.  Ti3SiC2 interphase coating in SiCf/SiC composites: Effect of the coating fabrication atmosphere and temperature , 2021 .

[2]  N. Travitzky,et al.  Preceramic paper-derived SiCf/Ti3Al(Si)C2 and SiCf/Ti3SiC2 MAX-phase based laminates fabricated using spark plasma sintering , 2021 .

[3]  D. Yoon,et al.  Fabrication of SiCf/Ti3SiC2 by the electrophoresis of highly dispersed Ti3SiC2 powder , 2020 .

[4]  O. Guillon,et al.  Short SiC fiber/Ti 3 SiC 2 MAX phase composites: Fabrication and creep evaluation , 2020, Journal of the American Ceramic Society.

[5]  D. Sciti,et al.  Is spark plasma sintering suitable for the densification of continuous carbon fibre - UHTCMCs? , 2020 .

[6]  Changsheng Liu,et al.  Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites , 2020, Journal of Advanced Ceramics.

[7]  Yiguang Wang,et al.  Fabrication of SiCf/Ti3SiC2 composites with high thermal conductivity by spark plasma sintering , 2020 .

[8]  W. M. Rainforth,et al.  Spark plasma sintering (SPS) synthesis and tribological behaviour of MAX phase composite of the family Tin+1SiCn (n = 2) , 2019, Wear.

[9]  Mehdi Shahedi Asl,et al.  Microstructural, thermal and mechanical characterization of TiB2–SiC composites doped with short carbon fibers , 2019, International Journal of Refractory Metals and Hard Materials.

[10]  M. Lagos,et al.  Ti3SiC2-Cf composites by spark plasma sintering: Processing, microstructure and thermo-mechanical properties , 2019, Journal of the European Ceramic Society.

[11]  E. Ayas,et al.  Evaluation of properties of spark plasma sintered Ti3SiC2 and Ti3SiC2/SiC composites , 2019, Ceramics International.

[12]  Chaowei Wang,et al.  Effects of sintering temperature on interface and mechanical properties of short carbon fiber reinforced Nb/Nb5Si3 composites fabricated by spark plasma sintering , 2019, Intermetallics.

[13]  Z. Balak,et al.  Characteristics of spark plasma sintered ZrB2-SiC-SCFs composites , 2019, Ceramics International.

[14]  G. Hilmas,et al.  Mechanical behaviour of carbon fibre reinforced TaC/SiC and ZrC/SiC composites up to 2100°C , 2019, Journal of the European Ceramic Society.

[15]  Jingyang Wang,et al.  Fiber reinforced highly porous γ-Y2Si2O7 ceramic fabricated by foam-gelcasting-freeze drying method , 2018 .

[16]  Zhihua Yang,et al.  Preparation and mechanical performance of ductile Csf/Al2O3–BN composites—Part 2: Effects of fiber contents and ablation properties , 2016 .

[17]  M. Barsoum,et al.  On the interactions of Ti2AlC, Ti3AlC2, Ti3SiC2 and Cr2AlC with silicon carbide and pyrolytic carbon at 1300 °C ☆ , 2015 .

[18]  Chunfeng Hu,et al.  SiC(SCS-6) fiber-reinforced Ti3AlC2 matrix composites: Interfacial characterization and mechanical behavior , 2015 .

[19]  D. Sciti,et al.  Tyranno SA3 fiber–ZrB2 composites. Part II: Mechanical properties , 2015 .

[20]  V. Medri,et al.  From random chopped to oriented continuous SiC fibers–ZrB2 composites , 2014 .

[21]  Xiaomeng Fan,et al.  Microstructure and Properties of Carbon Fiber Reinforced SiC Matrix Composites Containing Ti3SiC2 , 2014 .

[22]  Y. Sakka,et al.  Pressureless Sintering and Reaction Mechanisms of Ti3SiC2 Ceramics , 2014 .

[23]  Z. Jianhua,et al.  Mechanical properties and densification of short carbon fiber-reinforced TiB2/C composites produced by hot pressing , 2014 .

[24]  F. Deorsola,et al.  Influence of SPS parameters on the density and mechanical properties of sintered Ti3SiC2 powders , 2013 .

[25]  S. Harimkar,et al.  Microstructure and wear behavior of spark plasma sintered Ti3SiC2 and Ti3SiC2–TiC composites , 2013 .

[26]  P. Cui,et al.  Interfacial Reactions between Polymer Derived SiC Fiber and Ti3Si(Al)C2 , 2013 .

[27]  Michel W. Barsoum,et al.  Elastic and Mechanical Properties of the MAX Phases , 2011 .

[28]  J. M. Córdoba,et al.  The Reactivity of Ti2AlC and Ti3SiC2 with SiC Fibers and Powders up to Temperatures of 1550°C , 2011 .

[29]  I. Low,et al.  Comparison of thermal stability in MAX211 and 312 phases , 2010 .

[30]  M. Nygren,et al.  Microstructure and Toughening Mechanisms in Spark Plasma-Sintered ZrB2 Ceramics Reinforced by SiC Whiskers or SiC-Chopped Fibers , 2010 .

[31]  D. Sciti,et al.  Toughened ZrB2-based ceramics through SiC whisker or SiC chopped fiber additions , 2010 .

[32]  Zhengming Sun,et al.  Microstructural evolution and mechanical properties of Ti3SiC2-TiC composites , 2010 .

[33]  Jiecai Han,et al.  Characterization of hot-pressed short carbon fiber reinforced ZrB2–SiC ultra-high temperature ceramic composites , 2009 .

[34]  Zhengming Sun,et al.  Strengthening of Titanium Silicon Carbide by Grain Orientation Control and Silicon Carbide Whisker Dispersion , 2007 .

[35]  J. M. Córdoba,et al.  Synthesis of Ti3SiC2 Powders: Reaction Mechanism , 2007 .

[36]  W. Pan,et al.  Toughening of Ti3SiC2 with 3Y-TZP addition by spark plasma sintering , 2007 .

[37]  Zhengming Sun,et al.  Effect of Al addition on pressureless reactive sintering of Ti3SiC2 , 2006 .

[38]  S. Kalidindi,et al.  Damage Mechanisms around Hardness Indentations in Ti3SiC2 , 2005 .

[39]  Yong Huang,et al.  Synthesis of Ti3SiC2 Bulk Materials with B2O3 Additive , 2004 .

[40]  Hu Zhang,et al.  Improving the oxidation resistance of Ti3SiC2 by forming a Ti3Si0.9Al0.1C2 solid solution , 2004 .

[41]  Lei He,et al.  Preparation and characterization of Ti3SiC2 powder , 2004 .

[42]  Y. Zhou,et al.  First-principles study of equilibrium properties and electronic structure of Ti3Si0.75Al0.25C2 solid solution , 2003 .

[43]  Zhengming Sun,et al.  Ternary compound Ti3SiC2: Part I. Pulse discharge sintering synthesis , 2002 .

[44]  Yong Huang,et al.  Sintering of Ti3SiC2 with B2O3 additions , 2002 .

[45]  Michel W. Barsoum,et al.  The MN+1AXN phases: A new class of solids , 2000 .

[46]  E. A. Payzant,et al.  Thermal properties of Ti3SiC2 , 1999 .

[47]  M. Barsoum,et al.  Synthesis and Characterization of a Remarkable Ceramic: Ti3SiC2 , 1996 .

[48]  T. Yano,et al.  Synthesis and high temperature mechanical properties of Ti3SiC2/SiC composite , 1995 .

[49]  A. Carim,et al.  Synthesis of Titanium Silicon Carbide , 1995 .

[50]  M. Taya,et al.  Toughening of a particulate-reinforced/ceramic-matrix composite. Technical report , 1989 .