The extent of knowledge of Quick Response Manufacturing principles: an exploratory transnational study

The main goal of this research is to identify whether companies that have implemented the Quick Response Manufacturing (QRM) approach have full knowledge of the QRM principles or have merely applied the elements (principles and tools) that have a close relationship with Lean Manufacturing. Based on a review of the literature regarding the QRM principles, an exploratory survey was conducted for over 20 manufacturing companies from Brazil, Europe and the USA that operate in an Engineer or Make to Order environment system and explicitly have conducted QRM journeys. The results of the present study show that (i) the surveyed companies have difficulty knowing and applying some of the exclusive elements of this approach, even if they started implementing QRM several years ago; (ii) the surveyed companies’ knowledge degree over QRM exclusive elements is apparently higher among US-based companies due to better trained employees and better dissemination and awareness of the QRM exclusive elements; and (iii) a mentality based on productivity, low costs and due date delivery was identified as the main barrier for companies to achieve a higher knowledge degree regarding QRM.

[1]  S. Siegel,et al.  Nonparametric Statistics for the Behavioral Sciences , 2022, The SAGE Encyclopedia of Research Design.

[2]  Krisztina Demeter,et al.  Time-based competition - the aspect of partner proximity , 2013, Decis. Support Syst..

[3]  Jan Riezebos,et al.  Workload balancing capability of pull systems in MTO production , 2010 .

[4]  James P. Ignizio.  Optimizing Factory Performance: Cost-Effective Ways to Achieve Significant and Sustainable Improvement , 2009 .

[5]  Angappa Gunasekaran,et al.  Lean manufacturing in Brazilian small and medium enterprises: implementation and effect on performance , 2016 .

[6]  Rajan Suri.  Going beyond lean: focusing on time, not cost, can save your company a bundle , 2010 .

[7]  Mark A. Vonderembse,et al.  The impact of organizational structure on time-based manufacturing and plant performance , 2003 .

[8]  John K. McCreery,et al.  Competitive Priorities in Operations Management , 1998 .

[9]  William J. Doll,et al.  Developing measures of time-based manufacturing , 1998 .

[10]  Bhanu S. Ragu-Nathan,et al.  Development and validation of a measurement instrument for studying supply chain management practices , 2005 .

[11]  Jagjit Singh Srai,et al.  Institutional and strategic operations perspectives on manufacturing reshoring , 2016 .

[12]  Jeffrey K. Liker,et al.  The Toyota Production System and art: making highly customized and creative products the Toyota way , 2007 .

[13]  Christine Nadel,et al.  Case Study Research Design And Methods , 2016 .

[14]  Moacir Godinho Filho,et al.  Sistema POLCA: revisão, classificação e análise da literatura , 2014 .

[15]  Mark A. Vonderembse,et al.  The evolution of manufacturing systems: Towards the post-industrial enterprise , 1991 .

[16]  Danny Samson,et al.  Innovation capability in Australian manufacturing organisations: an exploratory study , 2014 .

[17]  Nuno O. Fernandes,et al.  Generic POLCA : a production and materials flow control mechanism for quick response manufacturing , 2006 .

[18]  Chieh-Min Chou,et al.  How does manufacturing service perceived value influence customer satisfaction? An investigation of global semiconductor industry , 2014 .

[19]  Moacir Godinho Filho,et al.  Utilização da abordagem Quick Response Manufacturing em uma empresa de materiais de escrita: proposta e análise de benefícios esperados , 2011 .

[20]  Simon P. Philbin.  Knowledge Management Strategy for University-Industry Research Collaboration , 2012 .

[21]  G. Stalk.  Time-The Next Source of Competitive Advantage , 1988 .

[22]  W Diop,et al.  Filling the gap. , 1988, Africa link : a publication of the Africa Region.

[23]  Takahiro Fujimoto.  The Evolution of Manufacturing Systems at Toyota , 1999 .

[24]  Xenophon Koufteros,et al.  The Impact of Organizational Culture on Time-Based Manufacturing and Performance , 2004, Decis. Sci..

[25]  T. S. Ragu-Nathan,et al.  The impact of time-based manufacturing practices on mass customization and value to customer , 2001 .

[26]  Dirk Pieter van Donk,et al.  The impact of the customer order decoupling point on type and level of supply chain integration , 2016 .

[27]  大野 耐一,et al.  Toyota production system : beyond large-scale production , 1988 .

[28]  Moacir Godinho Filho,et al.  Proposta de um método para atingir a manufatura responsiva na indústria de calçados: implantação e avaliação por meio de uma pesquisa-ação , 2012 .

[29]  Doreen Meier,et al.  Marketing Research Methodological Foundations , 2016 .

[30]  Rachna Shah,et al.  Defining and developing measures of lean production , 2007 .

[31]  Jose Arturo Garza-Reyes,et al.  Adoption of operations improvement methods in the Greek engineering sector , 2015, 2015 International Conference on Industrial Engineering and Operations Management (IEOM).

[32]  J. L. Bower,et al.  Fast-Cycle Capability for Competitive Power , 1988 .

[33]  Moacir Godinho Filho,et al.  Proposta de um método para atingir a manufatura responsiva na indústria de calçados: implantação e avaliação por meio de uma pesquisa-ação Proposal of a method to achieve responsive manufacturing in the footwear industry: implementation and assessment through research-action , 2012 .

[34]  M. Patton.  Qualitative research and evaluation methods , 1980 .

[35]  Nico Vandaele,et al.  Load-Based POLCA: An Integrated Material Control System for Multiproduct, Multimachine Job Shops , 2008, Manuf. Serv. Oper. Manag..

[36]  Rajan Suri,et al.  It's About Time: The Competitive Advantage of Quick Response Manufacturing , 2010 .

[37]  Giuliano Almeida Marodin,et al.  Implementing lean production systems: research areas and opportunities for future studies , 2013 .

[38]  Moacir Godinho Filho,et al.  Quick Response Manufacturing approach in a school supply company: proposal and analysis of expected results , 2011 .

[39]  Rambabu Kodali,et al.  Lean production: literature review and trends , 2015 .

[40]  新郷 重夫,et al.  A study of the Toyota production system from an industrial engineering viewpoint , 1989 .

[41]  J Swanson,et al.  Business Dynamics—Systems Thinking and Modeling for a Complex World , 2002, J. Oper. Res. Soc..

[42]  Ananth Krishnamurthy,et al.  Planning and implementing POLCA: a card-based control system for high variety or custom engineered products , 2009 .

[43]  Moacir Godinho Filho,et al.  From time-based competition (TBC) to quick response manufacturing (QRM): the evolution of research aimed at lead time reduction , 2013 .

[44]  Colin Sharp.  Qualitative Research and Evaluation Methods (3rd ed.) , 2003 .

[45]  David W. Chapman,et al.  Translation Procedures for the Cross Cultural Use of Measurement Instruments , 1979 .

[46]  Rajan Suri,et al.  Quick Response Manufacturing , 1998 .

[47]  R. Schroeder,et al.  Strategic, structural contingency and institutional explanations in the adoption of innovative manufacturing practices , 2004 .

[48]  Thomas C. Kinnear,et al.  Marketing Research: An Applied Approach , 2000 .

[49]  Computer Staff,et al.  The Machine That Changed the World , 1992 .

[50]  Clive H. Elphick,et al.  Quantitative Methods for Business Decisions , 1982 .

[51]  Wallace J. Hopp,et al.  Factory physics : foundations of manufacturing management , 1996 .

[52]  Yang Liu,et al.  Evaluating and developing resource-based operations strategy for competitive advantage: an exploratory study of Finnish high-tech manufacturing industries , 2015 .

[53]  R. Schroeder,et al.  Relationships between implementation of TQM, JIT, and TPM and manufacturing performance , 2001 .

[54]  Xenophon Koufteros,et al.  Internal and External Integration for Product Development: The Contingency Effects of Uncertainty, Equivocality, and Platform Strategy , 2005, Decis. Sci..

[55]  J. D. TEN HOONTE,et al.  A Quick Response Manufacturing Maturity Model & GAP analysis , 2012 .

[56]  James P. Womack,et al.  Lean Thinking: Banish Waste and Create Wealth in Your Corporation , 1996 .

[57]  Jan Riezebos.  Design of POLCA material control systems , 2010 .

[58]  S. Shott,et al.  Nonparametric Statistics , 2018, The Encyclopedia of Archaeological Sciences.

[59]  R. Yin,et al.  Case Study Research: Design and Methods (4th ed. , 2009 .