Multiple Simultaneous Ranging in IR-UWB Networks

Growth in the applications of wireless devices and the need for seamless solutions to location-based services has motivated extensive research efforts to address wireless indoor localization networks. Existing works provide range-based localization using ultra-wideband technology, focusing on reducing the inaccuracy in range estimation due to clock offsets between different devices. This is generally achieved via signal message exchange between devices, which can lead to network congestion when the number of users is large. To address the problem of range estimation with limited signal messages, this paper proposes multiple simultaneous ranging methods based on a property of time difference of reception of two packets transmitted from different sources in impulse-radio ultra-wideband (IR-UWB) networks. The proposed method maintains similar robustness to the clock offsets while significantly reducing the air time occupancy when compared with the best existing ranging methods. Experimental evaluation of ranging in a line-of-sight environment shows that the proposed method enables accurate ranging with minimal air time occupancy.

[1]  Erik G. Ström,et al.  TDOA Based Positioning in the Presence of Unknown Clock Skew , 2013, IEEE Transactions on Communications.

[2]  G. Meera Gandhi,et al.  GPS based Multi-hop Communication with Localization in Subterranean Wireless Sensor Networks☆ , 2015 .

[3]  Ronald Raulefs,et al.  Recent Advances in Indoor Localization: A Survey on Theoretical Approaches and Applications , 2017, IEEE Communications Surveys & Tutorials.

[4]  Fotini-Niovi Pavlidou,et al.  An overview of the IEEE 802.15.4a Standard , 2010, IEEE Communications Magazine.

[5]  João L. Monteiro,et al.  Localization and Positioning Systems for Emergency Responders: A Survey , 2017, IEEE Communications Surveys & Tutorials.

[6]  Chau Yuen,et al.  Cooperative relative positioning of mobile users by fusing IMU inertial and UWB ranging information , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[7]  Kristóf Attila Horváth,et al.  Passive extended double-sided two-way ranging algorithm for UWB positioning , 2017, 2017 Ninth International Conference on Ubiquitous and Future Networks (ICUFN).

[8]  PavlidouFotini-Niovi,et al.  An overview of the IEEE 802.15.4a standard , 2010 .

[9]  Heng Wang,et al.  A Global Clock Skew Estimation Scheme for Hierarchical Wireless Sensor Networks , 2017, IEEE Access.

[10]  Ulrich Rückert,et al.  Numerical and Experimental Evaluation of Error Estimation for Two-Way Ranging Methods † , 2019, Sensors.

[11]  Chen Zhang,et al.  A hybrid outdoor localization scheme with high-position accuracy and low-power consumption , 2018, EURASIP J. Wirel. Commun. Netw..

[12]  Yi Jiang,et al.  An Asymmetric Double Sided Two-Way Ranging for Crystal Offset , 2007, 2007 International Symposium on Signals, Systems and Electronics.

[13]  K. Yıldırım CLOCK SYNCHRONIZATION IN WIRELESS SENSOR NETWORKS , 2012 .

[14]  Dong Yang,et al.  A Model on Indoor Localization System Based on the Time Difference Without Synchronization , 2018, IEEE Access.

[15]  Kristóf Attila Horváth,et al.  Passive extended double-sided two-way ranging with alternative calculation , 2017, 2017 IEEE 17th International Conference on Ubiquitous Wireless Broadband (ICUWB).

[16]  Michael McLaughlin,et al.  An alternative double-sided two-way ranging method , 2016, 2016 13th Workshop on Positioning, Navigation and Communications (WPNC).

[17]  Hend Suliman Al-Khalifa,et al.  Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances † , 2016, Sensors.

[18]  Xiaodai Dong,et al.  High-Accuracy Localization Platform Using Asynchronous Time Difference of Arrival Technology , 2017, IEEE Transactions on Instrumentation and Measurement.

[19]  Kin K. Leung,et al.  A Survey of Indoor Localization Systems and Technologies , 2017, IEEE Communications Surveys & Tutorials.