Numerical analysis and design optimization of engine room to improve cooling performance for a mid-class excavator

Excavators perform high-load operations in mainly a fixed place, and the heat balance is determined by the performance of the cooling system. Prediction of the cooling system performance is difficult due to non-uniformity of the air flow field inside the engine room and complicated boundary conditions. In the present study, CFD analysis of the engine room was performed for a preliminary evaluation of the cooling system performance of an excavator, and the analysis technique was validated by comparison with heat balance test results for an actual vehicle. CFD analysis was performed according to the design of experiment method for three types of internal design variables and two types of external design variables. A sensitivity analysis of the engine room design variables was performed and a regression model for the major design variables was proposed. Based on the regression model, optimization was conducted for the engine room layout for performance improvement.

[1]  John H. Johnson,et al.  The Vehicle Engine Cooling System Simulation Part 1 - Model Development , 1999 .

[2]  Hamid Hadim,et al.  Handbook of Porous Media, Second Edition , 2000 .

[3]  John H. Johnson,et al.  The Vehicle Engine Cooling System Simulation Part 2 – Model Validation Using Transient Data , 1999 .

[4]  Rao D Nageswara,et al.  CFD Analysis of Axial Flow Fans for Radiator Cooling in Automobile Engines , 2007 .

[5]  Friedrich Brotz,et al.  Development of Engine Cooling Systems by Coupling CFD Simulation and Heat Exchanger Analysis Programs , 2001 .

[6]  Simulation Research of Engine Cooling System , 2012 .

[7]  B. Wiesler,et al.  Simulation-Based Vehicle Thermal Management System - Concept and Methodology , 2003 .

[8]  Ngy Srun Ap,et al.  Influence of Front End Vehicle, Fan and Shroud on the Heat Performance of A/C Condenser and Cooling Radiator , 2002 .

[9]  Bing Xu,et al.  Simulation of Cooling Airflow under Different Driving Conditions , 2007 .

[10]  K. Vafai.  Handbook of porous media , 2015 .

[11]  Stéphane Moreau,et al.  CFD Based Design for Automotive Engine Cooling Fan Systems , 1998 .

[12]  Jae Seok Lee,et al.  Numerical investigation of thermal enhancement of plate fin type heat exchanger with creases and holes in construction machinery , 2014 .

[13]  Sushanta K. Mitra,et al.  Numerical investigation of fluid flow and heat transfer over louvered fins in compact heat exchanger , 2007 .

[14]  Frank G. Rising.  Engine Cooling System Design for Heavy Duty Trucks , 1977 .

[15]  Thomas Hallqvist.  The Cooling Airflow of Heavy Trucks – a Parametric Study , 2008 .

[16]  Ni Liu,et al.  Investigation of flow and heat transfer characteristics on different heat exchangers of air conditioner , 2016 .

[17]  D. G. Tilley,et al.  Optimising Cooling System Performance Using Computer Simulation , 1997 .

[18]  John H. Johnson,et al.  Development and Evaluation of a Diesel Powered Truck Cooling System Computer Simulation Program , 1982 .

[19]  Anders Jönson,et al.  Development and Validation of Coolant Temperature and Cooling Air Flow CFD Simulations at Volvo Cars , 2004 .

[20]  Nasir Hayat,et al.  CFD applications in various heat exchangers design: A review , 2012 .

[21]  Zhijiu Chen,et al.  Parametric study on the performance of a heat exchanger with corrugated louvered fins , 2007 .