Research on the preparation and properties of foamed PP/wood flour composites

In order to improve the toughness of the wood-polymer composites, the microcellular structure was introduced to the polypropylene (PP) based wood-polymer composites by the technology of continuous extrusion in this article. In order to improve the mechanical and thermal properties of the samples further, the content of both wood flour (WF) and the chemical blowing agent were investigated. Besides, the compound foaming agents were also applied in the process of extrusion. According to the experimental results, the addition of WF contributed to increase both the softening temperatures and the apparent densities of the samples, and the best mechanical properties and microcellular structure were obtained when the mass ratio of WF to PP increased to 3/7. In addition, compared with the granular blowing agent, the powdered foaming agent showed a great advantage in dispersion, which helped to improve the bubble morphology and the mechanical strengths of the samples. Furthermore, the minimum bubble size and the maximum bubble density were both achieved at the powder content of 1 phr.

[1]  M. Jia,et al.  Extrusion foaming behavior of wood plastic composites based on PP/POE blends , 2019, Materials Research Express.

[2]  M. Jia,et al.  Effect of Polymer Blends on the Properties of Foamed Wood-Polymer Composites , 2019, Materials.

[3]  Zhouyi Wang,et al.  Optimizing torque rheometry parameters for assessing the rheological characteristics and extrusion processability of wood plastic composites , 2019 .

[4]  M. Bastian,et al.  Foam extrusion of PP-based wood plastic composites with chemical blowing agents and the Celuka technique , 2017 .

[5]  W. Gong,et al.  Application of a novel organic nucleating agent: Cucurbit[6]uril to improve polypropylene injection foaming behavior and their physical properties , 2017 .

[6]  Zhou Yuhui,et al.  新しい有機核形成剤の応用ポリプロピレン射出発泡挙動とその物理的特性を改善するためのククルビト[6]ウリル【Powered by NICT】 , 2017 .

[7]  Shigeki Takishima,et al.  Experimental and simulation study of the physical foaming process using high-pressure CO2 , 2016 .

[8]  Shigeki Takishima,et al.  Pressure drop threshold in the foaming of low-density polyethylene, polystyrene, and polypropylene using CO2 and N2 as foaming agents , 2015 .

[9]  Chul B. Park,et al.  Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties , 2014 .

[10]  Zhenxiang Xin,et al.  Effects of compatibilizers on the physico‐mechanical and foaming properties of polyproylene/wood‐fiber composites , 2013 .

[11]  J. Gwon,et al.  Effects of sizes and contents of exothermic foaming agent on physical properties of injection foamed wood fiber/HDPE composites , 2012 .

[12]  Jin Kuk Kim,et al.  Effect of flame retardants on mechanical properties, flammability and foamability of PP/wood–fiber composites , 2012 .

[13]  N. Petchwattana,et al.  Influences of particle sizes and contents of chemical blowing agents on foaming wood plastic composites prepared from poly(vinyl chloride) and rice hull , 2011 .

[14]  W. Yuan,et al.  Effects of crystal structure on the foaming of isotactic polypropylene using supercritical carbon dioxide as a foaming agent , 2009 .

[15]  M. Paoli,et al.  Thermal properties of high density polyethylene composites with natural fibres : Coupling agent effect , 2008 .

[16]  S. Tawfik,et al.  Influence of some additives on the performance of wood flour/polyolefin composites , 2008 .

[17]  L. Matuana,et al.  Nanoclay reinforced HDPE as a matrix for wood-plastic composites , 2008 .

[18]  Hengchong Shi,et al.  Comparative study on the effect of manchurian ash and larch wood flour on mechanical property, morphology, and rheology of HDPE/wood flour composites , 2008 .

[19]  B. Riedl,et al.  Preparation and morphology of polypropylene/wood flour composite foams via extrusion , 2005 .

[20]  Chul B. Park,et al.  Critical processing temperature in the manufacture of fine‐celled plastic/wood‐fiber composite foams , 2004 .

[21]  L. Matuana,et al.  Foam extrusion of high density polyethylene/wood-flour composites using chemical foaming agents , 2003 .

[22]  Chul B. Park,et al.  Processing and cell morphology relationships for microcellular foamed PVC/wood-fiber composites , 1997 .

[23]  Lee,et al.  A Refined Approach to Bubble Nucleation and Polymer Foaming Process: Dissolved Gas and Cluster Size Effects , 1996, Journal of Colloid and Interface Science.

[24]  Jonathan S. Colton,et al.  Nucleation of microcellular foam: Theory and practice , 1987 .

[25]  J. Martini,et al.  The Production and Analysis of Microcellular Thermoplastic Foam , 1982 .