Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio

This paper describes a new way to design and fabricate compliant micromechanisms and material structures with negative Poisson's ratio (NPR). The design of compliant mechanisms and material structures is accomplished in an automated way using a numerical topology optimization method. The procedure allows the user to specify the elastic properties of materials or the mechanical or geometrical advantages of compliant mechanisms and returns the optimal structures. The topologies obtained by the numerical procedure require practically no interaction by the engineer before they can be transferred to the fabrication unit. Fabrication is carried out by patterning a sputtered silicon on a PECVD-glass with a laser micromachining set-up. Subsequently the structures are etched into the underlying PECVD-glass and the glass are underetched, all in one two-step RIE process. The components are tested using a probe placed on an xy-stage. This fast prototyping allows newly developed topologies to be fabricated and tested within the same day.

[1]  J. Schweitz,et al.  The Design And Fabrication Of A Gripping Tool For Micromanipulation , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[2]  Matthias Müllenborn,et al.  Laser direct etching of silicon on oxide for rapid prototyping , 1996 .

[3]  J. Bourgat.  Numerical experiments of the homogenization method , 1979 .

[4]  O. Sigmund.  Materials with prescribed constitutive parameters: An inverse homogenization problem , 1994 .

[5]  R. Lakes.  Foam Structures with a Negative Poisson's Ratio , 1987, Science.

[6]  R. T. Howe,et al.  Nickel-filled Hexsil Thermally Actuated Tweezers , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[7]  Stefan Johansson,et al.  Design and fabrication of a gripping tool for micromanipulation , 1996 .

[8]  Ole Sigmund,et al.  Some Inverse Problems in Topology Design of Materials and Mechanisms , 1996 .

[9]  W. Riethmuller,et al.  Thermally excited silicon microactuators , 1988 .

[10]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[11]  R. F. Wolffenbuttel,et al.  Object Positioning Using A Surface Micromachined Distributed System , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[12]  Robert Almgren,et al.  An isotropic three-dimensional structure with Poisson's ratio =−1 , 1985 .

[13]  Jürgen Brugger,et al.  Design and fabrication of an overhanging xy-microactuator with integrated tip for scanning surface profiling , 1994 .

[14]  Fast 3d Laser Micromachining Of Silicon For Micromechanical And Microfluidic Applications , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[15]  Larry L. Howell,et al.  A Method for the Design of Compliant Mechanisms With Small-Length Flexural Pivots , 1994 .

[16]  Otto Leistiko,et al.  Opto-mechanical accelerometer based on strain sensing by a Bragg grating in a planar waveguide , 1996 .

[17]  Arthur G. Erdman,et al.  Mechanism Design : Analysis and Synthesis , 1984 .

[18]  Stefan Johansson,et al.  Assembling three-dimensional microstructures using gold-silicon eutectic bonding , 1994 .