Fast Identification of Multiple Indoor Constant Contaminant Sources by Ideal Sensors: A Theoretical Model and Numerical Validation

If hazardous contaminants are suddenly released indoors, quickly identifying the pollutants characteristics, such as the locations and emission rates, of the contaminant sources is critical for developing fast and effective response measures. This study presents a theoretical model for quickly identifying the locations and emission rates of multiple constant sources indoors using a single or limited number of ideal sensors. The model combines a linear programming model with an analytical expression of indoor contaminant dispersion that was presented in our previous study. Before the release of contaminants, only a limited number of time-consuming computational fluid dynamics (CFD) simulations need to be conducted to cover a large number of possible scenarios because of the analytical expression integrated into the model. After the release of contaminants, the model can be solved in real-time. Through case studies of sixteen contaminant release scenarios in a three-dimensional office, the effectiveness of the model was numerically demonstrated and validated. The results revealed that the identification accuracy of the presented model was closely related to the sensor layouts and the total sampling time, rather than the sampling interval.

[1]  Q. Chen,et al.  Identification of contaminant sources in enclosed environments by inverse CFD modeling. , 2007, Indoor air.

[2]  Cheng-Hung Huang,et al.  A three-dimensional inverse heat conduction problem in estimating surface heat flux by conjugate gradient method , 1999 .

[3]  X Liu,et al.  Location identification for indoor instantaneous point contaminant source by probability-based inverse Computational Fluid Dynamics modeling. , 2007, Indoor air.

[4]  James W. Axley,et al.  Multizone Airflow Modeling in Buildings: History and Theory , 2007 .

[5]  Amy Musser,et al.  An Analysis of Combined CFD and Multizone IAQ Model Assembly Issues | NIST , 2001 .

[6]  Xiaoping Zheng,et al.  Back-calculation of the strength and location of hazardous materials releases using the pattern search method. , 2010, Journal of hazardous materials.

[7]  A. Bagtzoglou,et al.  State of the Art Report on Mathematical Methods for Groundwater Pollution Source Identification , 2001 .

[8]  X Liu,et al.  Inverse modeling methods for indoor airborne pollutant tracking: literature review and fundamentals. , 2007, Indoor air.

[9]  M. Sohn,et al.  Rapidly Locating and Characterizing Pollutant Releases in Buildings , 2000, Journal of the Air & Waste Management Association.

[10]  Jelena Srebric,et al.  Application of Neural Networks Trained with Multi-Zone Models for Fast Detection of Contaminant Source Position in Buildings , 2007 .

[11]  Q Chen,et al.  Identification of contaminant sources in enclosed spaces by a single sensor. , 2007, Indoor air.

[12]  O. Alifanov.  Inverse heat transfer problems , 1994 .

[13]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[14]  Xianting Li,et al.  Accessibility: A New Concept to Evaluate Ventilation Performance in a Finite Period of Time , 2004 .

[15]  Fariborz Haghighat,et al.  Contaminant source identification within a building: Toward design of immune buildings , 2011, Building and Environment.

[16]  Sue Ellen Haupt,et al.  Utilizing state estimation to determine the source location for a contaminant , 2012 .

[17]  Spyros Andronopoulos,et al.  Identification of strength and location of stationary point source of atmospheric pollutant in urban conditions using computational fluid dynamics model , 2011, Math. Comput. Simul..

[18]  P V Nielsen,et al.  Computational fluid dynamics and room air movement. , 2004, Indoor air.

[19]  Zhiqiang John Zhai,et al.  Evaluation of Various Turbulence Models in Predicting Airflow and Turbulence in Enclosed Environments by CFD: Part 2—Comparison with Experimental Data from Literature , 2007 .

[20]  Robert M. Koerner,et al.  Groundwater pollution source identification from limited monitoring well data: Part 1 — Theory and feasibility , 1983 .

[21]  Qingyan Chen,et al.  Ventilation performance prediction for buildings: A method overview and recent applications , 2009 .

[22]  Qingyan Chen,et al.  A zero-equation turbulence model for indoor airflow simulation , 1998 .

[23]  Q Chen,et al.  Real-time or faster-than-real-time simulation of airflow in buildings. , 2009, Indoor air.

[24]  Zhaolin Gu,et al.  Time-Series Numerical Simulation of Wind Flow Within Urban Canopy Layer and Its Integration Effect for Prediction of Pollutant Concentration Variation , 2012 .

[25]  Zhiqiang John Zhai,et al.  Prompt tracking of indoor airborne contaminant source location with probability-based inverse multi-zone modeling , 2009 .

[26]  Enrique Roca,et al.  Source identification of heavy metals in pastureland by multivariate analysis in NW Spain. , 2009, Journal of hazardous materials.

[27]  Liangzhu Wang,et al.  Evaluation of some assumptions used in multizone airflow network models , 2008 .

[28]  Bin Zhao,et al.  Prediction of transient contaminant dispersion and ventilation performance using the concept of accessibility , 2004 .