论文信息 - A Design Method of Fractional-Slot Concentrated Winding SPMSM Using Winding factor and Inductance factor

A Design Method of Fractional-Slot Concentrated Winding SPMSM Using Winding factor and Inductance factor

This paper proposed a calculation method of the torque and power density especially for the fractional-slot concentrated winding machines. The torque coefficient and the inductance coefficient to transform from m-slot/n-pole machine to 3-phase/2-pole machine are used. Some machines were designed and these torque densities and power densities are compared. Experimental results showed the effectiveness of the proposed calculation method and have good accordance with both calculation results and FEA results.

Shinji Wakui | Kan Akatsu | S. Wakui | K. Akatsu

[1] Shinji Wakui,et al. Automatic Design Method for PM Motor which satisfies the Output NT Requirements , 2004 .

[2] Shigeo Morimoto,et al. Generalized analysis of operating limits on PM motors and suitable machine parameters for constant-power operation , 1998 .

[3] Thomas M. Jahns,et al. Pulsating torque minimization techniques for permanent magnet AC motor drives-a review , 1996, IEEE Trans. Ind. Electron..

[4] Z. Zhu,et al. Influence of design parameters on cogging torque in permanent magnet machines , 1997 .

[5] Thomas M. Jahns,et al. Experimental verification of optimal flux weakening in surface PM machines using concentrated windings , 2005 .

[6] Shinji Wakui,et al. Torque and Power Density Comparison between Fractional-slot Concentrated Winding SPMSMs , 2006 .

[7] C. Sadarangani,et al. Winding factors and Joule losses of permanent magnet machines with concentrated windings , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..