Modelling of macrosegregation: applications and future needs

Abstract Modelling and simulation of macrosegregation has experienced explosive growth since the pioneering studies of Flemings and co-workers in the mid-1960s. This paper presents a review of recent macrosegregation models, with particular emphasis on their application to selected industrially relevant casting processes. The successes and shortfalls of the models in predicting measured macrosegregation patterns are noted. Although it is still early in their development, advanced macrosegregation models that include a detailed consideration of the solidification microstructure are also reviewed. Recent studies involving direct numerical simulation of macrosegregation related phenomena on a microscopic scale are highlighted. Important issues deserving future research attention are identified.

[1]  H. Fredriksson,et al.  Modeling of the peritectic reaction and macro-segregation in casting of low carbon steel , 1996 .

[2]  A. F. Giamei,et al.  Motion and remelting of dendrite fragments during directional solidification of a nickel-base superalloy , 1997 .

[3]  V. Michaud,et al.  Infiltration of fiber preforms by a binary , 1992, Metallurgical and Materials Transactions A.

[4]  L. Arnberg,et al.  Experimental difficulties associated with permeability measurements in aluminum alloys , 2000 .

[5]  S. Cockcroft,et al.  Freckle formation and freckle criterion in superalloy castings , 2000 .

[6]  Frank P. Incropera,et al.  Solidification of a ternary metal alloy: A comparison of experimental measurements and model predictions in a Pb-Sb-Sn system , 1998 .

[7]  J. Drezet,et al.  Modeling of microsegregation in macrosegregation computations , 1996 .

[8]  Michel Rappaz,et al.  Modeling of casting, welding and advanced solidification processes-V : proceedings of the fifth International Conference on Modeling of Casting and Welding Processes, held in Davos Switzerland, September 16-21, 1990 , 1991 .

[9]  Christoph Beckermann,et al.  Prediction of Columnar to Equiaxed Transition during Diffusion-Controlled Dendritic Alloy Solidification , 1994 .

[10]  S. Felicelli,et al.  Simulation of freckles during vertical solidification of binary alloys , 1991 .

[11]  M. Rappaz,et al.  Numerical simulation of macrosegregation: a comparison between finite volume method and finite element method predictions and a confrontation with experiments , 1998 .

[12]  Christoph Beckermann,et al.  Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification , 1997 .

[13]  C. Beckermann,et al.  Modeling of solidification of metal-matrix particulate composites with convection , 1997 .

[14]  M. Rappaz,et al.  Solute diffusion model for equiaxed dendritic growth , 1987 .

[15]  Christoph Beckermann,et al.  A unified solute diffusion model for columnar and equiaxed dendritic alloy solidification , 1993 .

[16]  S. Felicelli,et al.  Three-dimensional simulations of freckles in binary alloys , 1998 .

[17]  Hasse Fredriksson,et al.  On the formation of pipes and centerline segregates in continuously cast billets , 1994 .

[18]  A. Mo,et al.  Simplified computation of macrosegregation in multicomponent aluminum alloys , 1998 .

[19]  V. Voller,et al.  Modeling of micro-macrosegregation in solidification processes , 1990 .

[20]  A. Mo,et al.  Experimental determination of mushy zone permeability in aluminum-copper alloys with equiaxed microstructures , 1999 .

[21]  Christoph Beckermann,et al.  Formation of macrosegregation by multicomponent thermosolutal convection during the solidification of steel , 1995 .

[22]  Christoph Beckermann,et al.  Equiaxed dendritic solidification with convection: Part I. Multiscale/multiphase modeling , 1996 .

[23]  M. M’hamdi,et al.  Modelling of heat transfer coupled with columnar dendritic growth in continuous casting of steel , 1999 .

[24]  C. Beckermann,et al.  Multiparticle interfacial drag in equiaxed solidification , 1995 .

[25]  Merton C. Flemings,et al.  Macrosegregation in a multicomponent low alloy steel , 1979 .

[26]  L. Arnberg,et al.  Determination of dendritic coherency in solidifying melts by rheological measurements , 1993 .

[27]  David R Poirier,et al.  The energy and solute conservation equations for dendritic solidification , 1991 .

[28]  W. Boettinger,et al.  Development of a freckle predictor via rayleigh number method for single-crystal nickel-base superalloy castings , 2000 .

[29]  Roderick I. L. Guthrie,et al.  Coupled turbulent flow, heat, and solute transport in continuous casting processes , 1995 .

[30]  M. Flemings,et al.  Macrosegregation in ternary alloys , 1970 .

[31]  A. Mo,et al.  A mathematical model for surface segregation in aluminum direct chill casting , 1999 .

[32]  M. Quintard,et al.  Numerical calculation of the permeability in a dendritic mushy zone , 1999 .

[33]  V. Voller,et al.  Computational issues in using a dual‐scale model of the segregation process in a binary alloy , 1997 .

[34]  S. Kou,et al.  Macrosegregation in Rotated Remelted Ingots , 1978 .

[35]  J. Drezet,et al.  Numerical simulation of deformation-induced segregation in continuous casting of steel , 2001 .

[36]  A. Mo,et al.  The effect of macroscopic solute diffusion in the liquid upon surface macrosegregation , 1997 .

[37]  A. V. Reddy,et al.  Modeling of macrosegregation due to thermosolutal convection and contraction-driven flow in direct chill continuous casting of an Al-Cu round ingot , 1997 .

[38]  Christoph Beckermann,et al.  Equiaxed dendritic solidification with convection: Part III. Comparisons with NH4Cl-H2O experiments , 1996 .

[39]  H. Combeau,et al.  Numerical model for prediction of the final segregation pattern of bearing steel ingots , 1993 .

[40]  S. Felicelli,et al.  Modeling freckle formation in three dimensions during solidification of multicomponent alloys , 1998 .

[41]  Chaoyang Wang,et al.  A multiphase solute diffusion model for dendritic alloy solidification , 1993, Metallurgical and Materials Transactions A.

[42]  A. Dubus,et al.  Infiltration of fiber preforms by an , 1992, Metallurgical and Materials Transactions A.

[44]  Wheeler,et al.  Phase-field model for isothermal phase transitions in binary alloys. , 1992, Physical review. A, Atomic, molecular, and optical physics.

[45]  Sergio D. Felicelli,et al.  Macrosegregation patterns in multicomponent Ni-base alloys , 1997 .

[46]  D. R. Poirier,et al.  Permeability for flow of liquid through equiaxial mushy zones , 1993 .

[47]  A. Mo,et al.  Eutectic reaction and nonconstant material parameters in micro-macrosegregation modeling , 1997 .

[48]  Christoph Beckermann,et al.  Equiaxed dendritic solidification with convection: Part II. Numerical simulations for an Al-4 Wt pct Cu alloy , 1996 .

[49]  S. Kou,et al.  Effect of fluid flow on macrosegregation in axi-symmetric ingots , 1981 .