Development and application of SKSSIM simulation software for the oxygen bottom blown copper smelting process

The oxygen bottom blown copper smelting process (SKS process) is a newly developed intense smelting process, which has been widely applied to copper production in China. A multiphase equilibrium model for the SKS process was established based on its mechanism characteristics and the principle of Gibbs energy minimization, and an efficient simulation software—SKSSIM (SKS Simulation)—was developed based on the model. Industrial data from the SKS process were used to compare with the calculated data from the SKSSIM software. The calculated data on the compositions of slag and matte as well as the distribution ratios of minor elements (such as Pb, Zn, As, Sb and Bi) among the slags, mattes and off-gases were in good agreement with the actual plant data. Accordingly, the SKSSIM simulation software has the potentail to be used for the prediction of smelting production and for optimizing the operating parameters of the SKS process.

[1]  R. Shimpo,et al.  An improved computer program for , 1993, Metallurgical and Materials Transactions A.

[2]  Z. Cui,et al.  Mixing Phenomena in a Bottom Blown Copper Smelter: A Water Model Study , 2015, Metallurgical and Materials Transactions B.

[3]  Tian-zu Yang,et al.  A New Pyrometallurgical Process for Producing Antimony White from By-Product of Lead Smelting , 2014 .

[4]  P. Chaubal,et al.  Thermodynamics of copper matte converting: Part IV. A priori predictions of the behavior of Au, Ag, Pb, Zn, Ni, Se, Te, Bi, Sb, and As in the noranda process reactor , 1982 .

[5]  Xueyi Guo,et al.  Reaction Mechanism and Distribution Behavior of Arsenic in the Bottom Blown Copper Smelting Process , 2017 .

[6]  L. K. Bailey,et al.  Mathematical modeling of minor-element behavior in flash smelting of copper concentrates and flash converting of copper mattes , 1989 .

[7]  P. Tan,et al.  Computer model of copper smelting process and distribution behaviors of accessory elements , 1997 .

[8]  Z. Cui,et al.  Understanding of Bath Surface Wave in Bottom Blown Copper Smelting Furnace , 2016, Metallurgical and Materials Transactions B.

[9]  Chen Zhuo,et al.  Numerical simulation of gas-liquid multi-phase flows in oxygen enriched bottom-blown furnace , 2012 .

[10]  Shen Dianbang,et al.  Influence of lance arrangement on bottom-blowing bath smelting process , 2012 .

[11]  Yan-qing Fan,et al.  Research and Industrial Application of a Process for Direct Reduction of Molten High-Lead Smelting Slag , 2017 .

[12]  Phillip J. Mackey,et al.  Energy Consumption in Copper Smelting: A New Asian Horse in the Race , 2015 .

[13]  C. C. R. S. Rossi,et al.  Gibbs free energy minimization for the calculation of chemical and phase equilibrium using linear programming , 2009 .

[14]  B. Marcos,et al.  Computation of complex and constrained equilibria by minimization of the Gibbs free energy , 2012 .

[15]  P. J. Mackey,et al.  Thermodynamics of copper matte converting: Part I. Fundamentals of the noranda process , 1978 .

[16]  Li Zhang,et al.  A Comparison Study of the Oxygen-Rich Side Blow Furnace and the Oxygen-Rich Bottom Blow Furnace for Liquid High Lead Slag Reduction , 2015 .

[17]  Xueyi Guo,et al.  Copper smelting mechanism in oxygen bottom-blown furnace , 2017 .