Moisture absorption studies of sisal fibre reinforced polypropylene composites

In this research, sisal fibre reinforced polypropylene (SF/PP) composites were prepared by injection moulding using a pre-coating technique that we have developed earlier. The composite specimens were subjected to hot water immersion treatment at 90 °C for different durations. The effects of the immersion treatment on the tensile and impact fracture characteristics were investigated. The apparent weight gain and weight loss curves were constructed. From the weight loss curves for the individual composites, the weight loss within the induction period was negligible. At the end of the induction period, the weight loss increased sharply. Due to the weight loss and the formation of additional moisture diffusion paths as immersion treatment proceeds, the apparent weight gain was non-Fickian. Both the tensile modulus and tensile strength of the SF/PP composites decreased continuously with increasing water immersion time. On the contrary, the Izod impact strength increased initially with immersion treatment. After reaching the maximum impact strength, the impact strength was found to decrease with further increase in immersion time. These contradictory behaviours between the tensile and impact properties were explained by the plasticization of the SF/PP interface and the swelling of the reinforcing sisal fibres.

[1]  Z. Ishak,et al.  Effects of hygrothermal aging and a silane coupling agent on the tensile properties of injection molded short glass fiber reinforced poly(butylene terephthalate) composites , 2001 .

[2]  Sabu Thomas,et al.  Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre , 1998 .

[3]  A. Błędzki,et al.  Composites reinforced with cellulose based fibres , 1999 .

[4]  R. Li,et al.  Reinforcement of polypropylene using sisal fibers grafted with poly(methyl methacrylate) , 2003 .

[5]  J. P. Lucas,et al.  The effects of a water environment on anomalous absorption behavior in graphite/epoxy composites , 1995 .

[6]  R. Li,et al.  Interface modification on the properties of sisal fiber‐ reinforced polypropylene composites , 2002 .

[7]  C. Albano,et al.  Thermal stability of blends of polyolefins and sisal fiber , 1999 .

[8]  Kin Liao,et al.  Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites , 2003 .

[9]  H. L. Bos,et al.  Influence of the Physical Structure of Flax Fibres on the Mechanical Properties of Flax Fibre Reinforced Polypropylene Composites , 2000 .

[10]  Yan Li,et al.  Sisal fibre and its composites: a review of recent developments , 2000 .

[11]  Yiu-Wing Mai,et al.  An investigation on the processing of sisal fibre reinforced polypropylene composites , 2003 .

[12]  Sabu Thomas,et al.  Effect of processing variables on the mechanical properties of sisal-fiber-reinforced polypropylene composites , 1999 .

[13]  S. Karlsson,et al.  Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties , 2004 .

[14]  R. Li,et al.  Impact behavior of sawdust/recycled–PP composites , 2001 .

[15]  A. Retegi,et al.  Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling , 2005 .

[16]  Andrzej K. Bledzki,et al.  Possibilities to Improve the Properties of Natural Fiber Reinforced Plastics by Fiber Modification – Jute Polypropylene Composites – , 2000 .

[17]  Sabu Thomas,et al.  Effect of chemical treatment on the tensile properties of short sisal fibre-reinforced polyethylene composites , 1996 .

[18]  Ming Qiu Zhang,et al.  Environmental degradability of self-reinforced composites made from sisal , 2004 .

[19]  Roberto Olayo,et al.  Effect of fiber surface treatment on the fiber-matrix bond strength of natural fiber reinforced composites , 1999 .

[20]  Satyendra Mishra,et al.  The compatibilising effect of maleic anhydride on swelling and mechanical properties of plant-fiber-reinforced novolac composites , 2000 .