Photocuring of mono- and di-functional (meth)acrylates with tris [2-(acryloyloxy)ethyl]isocyanurate

[1]  D. Bogdał,et al.  Application of diol dimethacrylates in dental composites and their influence on polymerization shrinkage , 1997 .

[2]  E. Andrzejewska,et al.  Monomolecular and bimolecular termination in the polymerization of di(meth)acrylates , 1997 .

[3]  D. Bogdał,et al.  The Determination of Polymerization Shrinkage of Materials for Conservative Dentistry , 1996 .

[4]  C. Bowman,et al.  Polymerization kinetics and volume relaxation behavior of photopolymerized multifunctional monomers producing highly crosslinked networks , 1994 .

[5]  L. Lindén.  Applied photochemistry in dental science , 1993 .

[6]  J. H. Lai,et al.  Measuring polymerization shrinkage of photo-activated restorative materials by a water-filled dilatometer. , 1993, Dental materials : official publication of the Academy of Dental Materials.

[7]  J. Fouassier,et al.  Radiation curing in polymer science and technology , 1993 .

[8]  N. Gjerdet,et al.  Leaching of organic additives from dentures in vivo. , 1993, Acta odontologica Scandinavica.

[9]  A. Feilzer,et al.  True linear polymerization shrinkage of unfilled resins and composites determined with a linometer. , 1993, Dental materials : official publication of the Academy of Dental Materials.

[10]  H. Nishide,et al.  Polymerization and photoinitiation behavior in the light‐cured dental composite resins , 1992 .

[11]  R. Kent,et al.  Effect of Age on Immunoglobulin Content and Volume of Human Labial Gland Saliva , 1992, Journal of dental research.

[12]  M. Freund,et al.  Change in Surface Hardness of BisGMA/TEGDMA Polymer due to Enzymatic Action , 1992, Journal of dental research.

[13]  J L Ferracane,et al.  Post-cure heat treatments for composites: properties and fractography. , 1992, Dental materials : official publication of the Academy of Dental Materials.

[14]  G. Schuster,et al.  A comparison of monomer conversion and inorganic filler content in visible light-cured denture resins. , 1992, Dental materials : official publication of the Academy of Dental Materials.

[15]  J. Vaidyanathan,et al.  Interactive effects of resin composition and ambient temperature of light curing on the percentage conversion, molar heat of cure and hardness of dental composite resins , 1992 .

[16]  W. Cook.  Photopolymerization kinetics of dimethacrylates using the camphorquinone/amine initiator system , 1992 .

[17]  H. Shintani,et al.  Residual monomers (TEGDMA and Bis-GMA) of a set visible-light-cured dental composite resin when immersed in water. , 1991, Journal of oral rehabilitation.

[18]  Nikolaos A. Peppas,et al.  Coupling of kinetics and volume relaxation during polymerizations of multiacrylates and multimethacrylates , 1991 .

[19]  J. Fisher,et al.  Fatigue and wear of dental materials. , 1990, Journal of dentistry.

[20]  C. Davidson,et al.  Quantitative determination of stress reduction by flow in composite restorations. , 1990, Dental materials : official publication of the Academy of Dental Materials.

[21]  G. Simon,et al.  Nature of residual unsaturation during cure of dimethacrylates examined by CPPEMAS carbon-13 NMR and simulation using a kinetic gelation model , 1989 .

[22]  G. Simon,et al.  Dynamic mechanical properties and cross-polarized, proton-enhanced, magic angle spinning carbon-13 NMR time constants of poly[oligo(ethylene glycol)dimethacrylates] , 1989 .

[23]  H. Boots,et al.  Network formation by chain crosslinking photopolymerization and some applications in electronics , 1989 .

[24]  J. Rees,et al.  The polymerization shrinkage of composite resins. , 1989, Dental materials : official publication of the Academy of Dental Materials.

[25]  R. Davidson,et al.  Photoinitiators and photoinitiation, 8 The photoinduced α‐cleavage of acylphosphine oxides. Identification of the initiating radicals using a model substrate , 1988 .

[26]  T. Horibe,et al.  Polymerization of multifunctional methacrylates and acrylates. , 1988, Journal of biomedical materials research.

[27]  D. M. Walker,et al.  The Release of Residual Monomeric Methyl Methacrylate from Acrylic Appliances in the Human Mouth: An Assay for Monomer in Saliva , 1988, Journal of dental research.

[28]  C. Davidson,et al.  Curing contraction of composites and glass-ionomer cements. , 1988, The Journal of prosthetic dentistry.

[29]  C. Davidson,et al.  Setting Stress in Composite Resin in Relation to Configuration of the Restoration , 1987, Journal of dental research.

[30]  O. Gómez-Marín,et al.  A Comparative Study of the Effects of Dentinal Bonding Agents and Application Techniques on Marginal Gaps in Class V Cavities , 1987, Journal of dental research.

[31]  J. Roulet.  Degradation of Dental Polymers , 1986 .

[32]  R. Penn,et al.  A recording dilatometer for measuring polymerization shrinkage. , 1986, Dental materials : official publication of the Academy of Dental Materials.

[33]  V. A. Bhanu,et al.  Effect of oxygen on the polymerization of acrylamide , 1986 .

[34]  M. Brännström.  The Hydrodynamic Theory of Dentinal Pain: Sensation in Preparations, Caries, and the Dentinal Crack Syndrome , 1986 .

[35]  F. Greidanus,et al.  Structure and stability of polyacrylate radicals trapped in a network , 1986 .

[36]  J. Ferracane,et al.  The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. , 1986, Journal of biomedical materials research.

[37]  Mjör Ia.  Frequency of secondary caries at various anatomical locations. , 1985, Operative dentistry.

[38]  B. Björkner.  The sensitizing capacity of multifunctional acrylates in the guinea pig , 1984, Contact dermatitis.

[39]  J. Ferracane,et al.  Fourier Transform Infrared Analysis of Degree of Polymerization in Unfilled Resins—Methods Comparison , 1984, Journal of dental research.

[40]  F Lutz,et al.  In vivo and in vitro Wear of Potential Posterior Composites , 1984, Journal of dental research.

[41]  C. Davidson,et al.  Relaxation of Polymerization Contraction Stresses by Flow in Dental Composites , 1984, Journal of dental research.

[42]  H. Boots,et al.  Inhomogeneity during the photopolymerization of diacrylates: d.s.c. experiments and percolation theory , 1984 .

[43]  C F Cox,et al.  Bacterial leakage around dental restorations: its effect on the dental pulp. , 1982, Journal of oral pathology.

[44]  J. Roulet,et al.  The surface roughness of restorative materials and dental tissues after polishing with prophylaxis and polishing pastes. , 1982, Journal of periodontology.

[45]  R. Basker,et al.  The level of residual monomer in acrylic denture base materials with particular reference to a modified method of analysis , 1980, British Dental Journal.

[46]  J. Powers,et al.  Erosion of Composite Resins , 1980, Journal of dental research.

[47]  W. Goebel,et al.  Reactions to acrylic resin dental prostheses. , 1980, The Journal of prosthetic dentistry.

[48]  D. Welker,et al.  Toxicity evaluation of water soluble substances of dental materials by means of cell population in vitro. , 1980, Archives of toxicology. Supplement. = Archiv fur Toxikologie. Supplement.

[49]  R. G. Craig.  Restorative dental materials , 1971 .

[50]  J. Crissey.  Stomatitis, dermatitis, and denture materials. , 1965, Archives of dermatology.