Optimal Trajectory Planning for Parallel Robots Considering Time-Jerk

A method for optimization in trajectory planning of 3RUU robot manipulators is presented in this paper. At first, to get the optimal trajectory, position analyses has been done on the 3RUU robot, then an objective function which have two terms is minimized: first term relevant to the total execution time and another one relevant to the integral of the squared jerk (defined as the derivative of the acceleration toward time) along the trajectory and this Guarantees that the obtained trajectory is smooth. This technique let to calculate the kinematic constraints on the motion of the robot, defined as upper limits on the absolute values of velocity, acceleration and jerk. , the total execution time does not require to be set priori. The algorithm has been tested in simulation and in comparison with other important trajectory planning techniques it has been given good results.

[1]  Sung-Rak Kim,et al.  A practical approach for minimum-time trajectory planning for industrial robots , 2010, Ind. Robot.

[2]  Kostas J. Kyriakopoulos,et al.  Minimum jerk path generation , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[3]  Elizabeth A. Croft,et al.  Smooth and time-optimal trajectory planning for industrial manipulators along specified paths , 1999, J. Field Robotics.

[4]  A. Gasparetto,et al.  A new method for smooth trajectory planning of robot manipulators , 2007 .

[5]  DK Qu,et al.  Path-constrained time-optimal robot control , 2006 .

[6]  Qu Daokui,et al.  Path-constrained Timen-ioptimal Robot Control , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[7]  Aurelio Piazzi,et al.  Global minimum-jerk trajectory planning of robot manipulators , 2000, IEEE Trans. Ind. Electron..

[8]  Dan Simon,et al.  A trigonometric trajectory generator for robotic arms , 1993 .

[9]  A. Piazzi,et al.  An interval algorithm for minimum-jerk trajectory planning of robot manipulators , 1997, Proceedings of the 36th IEEE Conference on Decision and Control.

[10]  Z. Kovacic,et al.  Trajectory planning algorithm based on the continuity of jerk , 2007, 2007 Mediterranean Conference on Control & Automation.

[11]  Jingyan Dong,et al.  Feed-rate optimization with jerk constraints for generating minimum-time trajectories , 2007 .

[12]  Olivier Gibaru,et al.  Feedrate planning for machining with industrial six-axis robots , 2010 .

[13]  C. Lin,et al.  Formulation and optimization of cubic polynomial joint trajectories for industrial robots , 1983 .

[14]  A. Gasparetto,et al.  A technique for time-jerk optimal planning of robot trajectories , 2008 .

[15]  Panwadee Tangpattanakul,et al.  Minimum-time trajectory of robot manipulator using Harmony Search algorithm , 2009, 2009 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology.

[16]  N. van de Wouw,et al.  Path-Constrained Motion Planning for Robotics Based on Kinematic Constraints , 2007 .

[17]  Yangsheng Xu,et al.  Global Minimum-Jerk Trajectory Planning of Space Manipulator , 2006 .