The Paradox of Papermaking.

Marty Hubbe is Associate Professor in the Department of Wood and Paper Science at North Carolina State University. He received his BS in Chemistry from Colby College in 1976, his MS in paper technology from the Institute of Paper Chemistry in 1979, and his PhD in Chemistry from Clarkson University in 1984. His interests include the colloidal chemistry of papermaking, surface charges, and polyelectrolytes.

[1]  W. K. Wilson,et al.  Comparison of Accelerated Aging of Book Papers in 1937 with 36 Years Natural Aging , 1974 .

[2]  Cf Baker,et al.  Good practice for refining the types of fiber found in modern paper furnishes , 1995 .

[3]  C. Biermann,et al.  Handbook of Pulping and Papermaking , 1996 .

[4]  R. A. Wahaab Evaluation of Aerobic Biodegradability of Some Chemical Compounds Commonly Applied in Paper Industry , 2000, Bulletin of environmental contamination and toxicology.

[5]  Gary A. Smook,et al.  Handbook for Pulp and Paper Technologists , 1982 .

[6]  L. Salmén,et al.  Effects of mechanical and chemical treatments on the pore-size distribution in wood pulps examined by inverse size-exclusion chromatography , 1997 .

[7]  K. J. Bottorff,et al.  AKD sizing mechanism: a more definitive description , 1994 .

[8]  Lars Wågberg,et al.  The effect of charge density and hydrophobic modification on dextran-based paper strength enhancing polymers , 2000 .

[9]  E. L. Back,et al.  Glass transitions of wood components hold implications for molding and pulping processes [Wood and paper materials]. , 1982 .

[10]  B. Wahlstrom Wet pressing in the 20th century: Evolution, understanding and future , 2001 .

[11]  L. Wågberg,et al.  The action of cationic polyelectrolytes used for the fixation of dissolved and colloidal substances , 1991 .

[12]  Agne Swerin,et al.  Adsorption and flocculation in suspensions by two cationic polymers : Simultaneous and sequential addition , 1997 .

[13]  A. Worsick Developments in press technology , 1994 .

[14]  Shunsuke Okushima,et al.  Curl in Paper , 1989 .

[15]  Huining Xiao,et al.  Retention mechanisms for two-component systems based on phenolic resins and PEO or new PEO-copolymer retention aids , 1996 .

[16]  Martin A. Hubbe,et al.  Distribution characteristics of rosin size and their effect on the internal sizing of paper , 2000 .

[17]  Dan Eklund,et al.  On the interaction between cationic polyacrylamide and dissolved and colloidal substances in thermomechanical pulp , 2004 .

[18]  Rauni Seppänen,et al.  Mechanism of internal sizing by alkyl ketene dimers (AKD): The role of the spreading monolayer precursor and autophobicity , 2000 .

[19]  A. Swerin,et al.  Transfer of cationic retention aid from fibers to fine particles and cleavage of polymer chains under wet-end papermaking conditions , 1993 .

[20]  Martin A. Hubbe,et al.  Detachment of colloidal hydrous oxide spheres from flat solids exposed to flow 2. Mechanism of release , 1985 .

[21]  J. F. Waterhouse,et al.  Effect of papermaking variables on formation , 1993 .

[22]  Gil Garnier,et al.  Wetting mechanism of alkyl ketene dimers on cellulose films , 1998 .

[23]  Martin A. Hubbe,et al.  Retention and hydrodynamic shear , 1986 .

[24]  I. S. Goldstein,et al.  Wood structure and composition , 1991 .

[25]  John F. Waterhouse Monitoring the aging of paper , 1988 .

[26]  Luciano Beghello,et al.  Some mechanisms that govern fiber flocculation , 1997 .

[27]  Gil Garnier,et al.  Association in Solution and Adsorption at an Air−Water Interface of Alternating Copolymers of Maleic Anhydride and Styrene , 2000 .

[28]  Robert A. Gill The behavior of on-site synthesized precipitated calcium carbonates and other calcium carbonate fillers on paper properties , 1989 .

[29]  Hannu Paulapuro,et al.  Characteristics of the strength properties of a mixture sheet under wet straining drying , 2002 .

[30]  Erik Lindgren,et al.  Important properties of colloidal silica in microparticulate systems , 1996 .

[31]  H. Paulapuro,et al.  The Role of Fourdrinier Table Activity in the Manufacture of Various Paper and Board Grades , 1992 .

[32]  J. Casey Pulp and paper : chemistry and chemical technology , 1960 .

[33]  Thomas Collings,et al.  A NEW CHRONOLOGY OF PAPERMAKING TECHNOLOGY , 1990 .

[34]  K. T. Hodgson,et al.  A review of paper sizing using alkyl ketene dimer versus alkenyl succinic anhydride , 1994 .

[35]  B. Alince,et al.  Stability of ground and precipitated CaCO3 suspensions in the presence of polyethylenimine and salt , 1996 .

[36]  R. B. Wasser The reactivity of alkenyl succinic anhydride: its pertinence with respect to alkaline sizing , 1987 .

[37]  A. Isogai Mechanism of paper sizing by alkylketene dimers , 1999 .

[38]  G. H. Fairchild Increasing the filler content of PCC-filled alkaline papers , 1992 .

[39]  Peter Axegård,et al.  Pulp bleaching and the environment - the situation 1993 , 1993 .

[40]  John A. Heitmann,et al.  The Positive Pulse Jar (PPJ) : A flexible device for retention studies , 2006 .

[41]  T. C. Maloney,et al.  The centrifugal compression value , 1999 .

[42]  R. C. Howard,et al.  The effect of cationic starch on the tensile strength of paper , 1989 .

[43]  Thomas Jorling The forest products industry: a sustainable enterprise. , 2000 .

[44]  J. E. Stone,et al.  A structural model for the cell wall of water-swollen wood pulp fibres based on their accessibility to macromolecules , 1968 .

[45]  H. Paulapuro,et al.  The effect of retention aids, drainage conditions and pretreatment of slurry on high vacuum dewatering; a laboratory study , 1994 .

[46]  H. Paulapuro,et al.  Hydraulic and rectifier roll headboxes in boardmaking , 1990 .

[47]  B. Alince,et al.  Association-induced polymer bridging : New insights into the retention of fillers with PEO , 1996 .

[48]  John A. Heitmann,et al.  Effects of Sugar Addition Before Drying on the Wet-Flexibility of Redispersed Kraft Fibers , 2004 .

[49]  T. Suen,et al.  Ionic Derivatives of Polyacrylamide , 1956 .

[50]  D. Tollenaar,et al.  The structure of paper , 1951 .

[51]  K. Lunkwitz,et al.  The use of oppositely charged polyelectrolytes as flocculants and retention aids , 1996 .

[52]  Lars Wågberg,et al.  The role of surface polymer compability in the formation of fiber/fiber bonds in paper , 2000 .

[53]  K. W. Britt,et al.  Observations on water removal in papermaking , 1986 .

[54]  Hannu Paulapuro,et al.  The effect of Condebelt drying on the structure of fiber bonds , 1993 .

[55]  L. Baldwin High vacuum dewatering , 1997 .

[56]  B. Alince,et al.  Flocculation of clay particles with poorly and well-dissolved polyethylene oxide , 1999 .

[57]  A. Swerin,et al.  Flocculation and floc strength : from the laboratory to the FEX paper machine , 1996 .

[58]  G. Garnier,et al.  Wetting mechanism of a starch-stabilized alkylketene dimer emulsion: A study by atomic force microscopy , 1999 .

[59]  R. Yin Industry characteristics and investment decisions : An alternative approach to pulp and paper production , 1998 .

[60]  F. Tiberg,et al.  Surface chemistry of paper , 2002 .

[61]  Martin A. Hubbe,et al.  WHERE TO ADD RETENTION AID: ISSUES OF TIME AND SHEAR , 2002 .

[62]  E. Litchfield Dewatering aids for paper applications , 1994 .

[63]  John C. Walkush The coagulation of cellulose pulp fibers and fines as a mechanism of retention. , 1970 .

[64]  A. Sundberg,et al.  Interactions of cationic polymers with components in thermomechanical pulp suspensions , 1994 .

[65]  K. J. Ives,et al.  Experimental Methods (2) , 1978 .

[66]  K. Räisänen,et al.  Vacuum dewatering optimization with different furnishes , 1996 .

[67]  S. Pargellis : Papermaking: The History and Technique of an Ancient Craft , 1944 .

[68]  J. Gustavsson,et al.  Evidence for β-ketoester formation during the sizing of paper with alkylketene dimers , 1987 .

[69]  S. Main,et al.  Retention aids for high-speed paper machines , 1999 .

[70]  Kelly R. Munkittrick,et al.  Environmental impacts of pulp and paper wastewater: Evidence for a reduction in environmental effects at North American pulp mills since 1992 , 1997 .

[71]  Elias Retulainen Condebelt press drying and sustainable paper cycle , 2003 .

[72]  R. F. Ross,et al.  Simulation of flowing wood fibre suspensions , 1998 .

[73]  C. Dodson,et al.  Fiber crowding, fiber contacts, and fiber flocculation. , 1996 .

[74]  Martin A. Hubbe,et al.  The Dispersion Science of Papermaking , 2005 .

[75]  R. J. Kerekes,et al.  Characterization of fibre flocculation regimes by a crowding factor , 1992 .