Ratiometric Artifact Reduction in Low Power Reflective Photoplethysmography

This paper presents effective signal-processing techniques for the compensation of motion artifacts and ambient light offsets in a reflective photoplethysmography sensor suitable for wearable applications. A ratiometric comparison of infrared (IR) and red absorption characteristics cancels out noise that is multiplicative in nature and amplitude modulation of pulsatile absorption signals enables rejection of additive noise. A low-power, discrete-time pulse-oximeter platform is used to capture IR and red photoplethysmograms so that the data used for analysis have noise levels representative of what a true body sensor network device would experience. The proposed artifact rejection algorithm is designed for real-time implementation with a low-power microcontroller while being robust enough to compensate for varying levels in ambient light as well as reducing the effects of motion-induced artifacts. The performance of the system is illustrated by its ability to extract a typical plethysmogram heart-rate waveform since the sensor is subjected to a range of physical disturbances.

[1]  Guang-Zhong Yang,et al.  A Flexible, Low Noise Reflective PPG Sensor Platform for Ear-Worn Heart Rate Monitoring , 2009, 2009 Sixth International Workshop on Wearable and Implantable Body Sensor Networks.

[2]  M. Petterson,et al.  Adaptive filtering and alternative calculations revolutionizes pulse oximetry sensitivity and specificity during motion and low perfusion , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[3]  Sun K. Yoo,et al.  Motion artifact reduction in photoplethysmography using independent component analysis , 2006, IEEE Transactions on Biomedical Engineering.

[4]  Y. Mendelson,et al.  Measurement site and photodetector size considerations in optimizing power consumption of a wearable reflectance pulse oximeter , 2003, Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE Cat. No.03CH37439).

[5]  B. Widrow,et al.  Adaptive noise cancelling: Principles and applications , 1975 .

[6]  John Allen.  Photoplethysmography and its application in clinical physiological measurement , 2007, Physiological measurement.

[7]  Y. Mendelson,et al.  Noninvasive pulse oximetry utilizing skin reflectance photoplethysmography , 1988, IEEE Transactions on Biomedical Engineering.

[8]  Takuo Aoyagi,et al.  Pulse oximetry: its invention, theory, and future , 2003, Journal of Anesthesia.

[9]  M. J. Hayes,et al.  Artefact reduction in photoplethysmography , 1998 .

[10]  Steve Warren,et al.  Two-Stage Approach for Detection and Reduction of Motion Artifacts in Photoplethysmographic Data , 2010, IEEE Transactions on Biomedical Engineering.

[11]  H. Harry Asada,et al.  Artifact-resistant power-efficient design of finger-ring plethysmographic sensors , 2001, IEEE Transactions on Biomedical Engineering.

[12]  P. Gibbs,et al.  Active noise cancellation using MEMS accelerometers for motion-tolerant wearable bio-sensors , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[13]  Yuan-Ting Zhang,et al.  An Efficient Motion-Resistant Method for Wearable Pulse Oximeter , 2008, IEEE Transactions on Information Technology in Biomedicine.

[14]  K. Ashoka Reddy,et al.  Use of Fourier Series Analysis for Motion Artifact Reduction and Data Compression of Photoplethysmographic Signals , 2009, IEEE Transactions on Instrumentation and Measurement.

[15]  E. Hari Krishna,et al.  On the Performance of Wavelets in Reducing Motion Artifacts from Photoplethysmographic Signals , 2010, 2010 4th International Conference on Bioinformatics and Biomedical Engineering.

[16]  E. Jovanov,et al.  Reconfigurable intelligent sensors for health monitoring: a case study of pulse oximeter sensor , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[17]  Zhang Wen,et al.  Extracting Motional Information from the PhotoPlethysmography Using Reconstruction of the Wavelet Transforms Modulus Maxima , 2008, 2008 2nd International Conference on Bioinformatics and Biomedical Engineering.

[18]  Zhang Da,et al.  A Method of Pre-processing Photoplethysmographic Signal Based on Adaptive Filter for Pulse Oximeter , 2010, 2010 International Conference on Intelligent Computation Technology and Automation.

[19]  Rosalind W. Picard,et al.  Motion-tolerant magnetic earring sensor and wireless earpiece for wearable photoplethysmography , 2010, IEEE Transactions on Information Technology in Biomedicine.

[20]  K. Birkelund,et al.  A Ring-Shaped Photodiode Designed for Use in a Reflectance Pulse Oximetry Sensor in Wireless Health Monitoring Applications , 2010, IEEE Sensors Journal.