Sensitivity analysis of deep geothermal reservoir: Effect of reservoir parameters on production temperature

This study aims to guide reservoir engineers/managers in the selection of a combination of parameters from amongst various possible alternatives in developing deep geothermal reservoirs which can meet the desired temperature at the production wellhead for sustainable energy production. The work presents an approach for predicting the long-term performance of a deep geothermal reservoir using multiple combinations of various reservoir parameters. The finite element method and factorial experimental design are applied to forecast which of the parameters has the most influence on long-term reservoir productivity. The solver employed is validated using known analytical solution and experimental measurements with good agreement. After the validation, an investigation is then performed based on the Soultz lower geothermal reservoir. The results showed that fluid injection temperature is the parameter that influences the experiment the most during exploitation involving production temperature, whereas injection pressure rate happens to have a more significant impact on reservoir cooling.

[1]  Subir K. Sanyal,et al.  FUTURE OF GEOTHERMAL ENERGY , 2010 .

[2]  Chrystel Dezayes,et al.  3D model of fracture zones at Soultz-sous-Forêts based on geological data, image logs, induced microseismicity and vertical seismic profiles , 2010 .

[3]  Chang-Long Wang,et al.  Analysis of influencing factors of heat extraction from enhanced geothermal systems considering water losses , 2016 .

[4]  Oliver Kastner,et al.  New Approaches of Coupled Simulation of Deep Geothermal Systems , 2015 .

[5]  Wenqing Wang,et al.  Thermo-Hydro-Mechanical-Chemical Processes in Porous Media: Benchmarks and Examples , 2018 .

[6]  Christian Vogt,et al.  Maximum potential for geothermal power in Germany based on engineered geothermal systems , 2015, Geothermal Energy.

[7]  Jie-min Zhan,et al.  Numerical investigation of electricity generation potential from fractured granite reservoir by water circulating through three horizontal wells at Yangbajing geothermal field , 2016 .

[8]  Olaf Kolditz,et al.  Thermo-Hydro-Mechanical-Chemical Processes in Porous Media , 2012 .

[10]  Musa D. Aliyu,et al.  NUMERICAL MODELLING OF COUPLED HYDRO-THERMAL PROCESSES OF THE SOULTZ HETEROGENEOUS GEOTHERMAL SYSTEM , 2016 .

[11]  M. Kubik.  The Future of Geothermal Energy , 2006 .

[12]  C. Castaing,et al.  Comparative analysis of direct (core) and indirect (borehole imaging tools) collection of fracture data in the Hot Dry Rock Soultz reservoir (France) , 1997 .

[13]  M. Rabinowicz,et al.  Two‐ and three‐dimensional modeling of hydrothermal convection in the sedimented Middle Valley segment, Juan de Fuca Ridge , 1998 .

[14]  Satish Karra,et al.  A simulator for modeling coupled thermo-hydro-mechanical processes in subsurface geological media , 2014 .

[16]  Michael A. Hicks,et al.  A prototype design model for deep low-enthalpy hydrothermal systems , 2015 .

[17]  Albert Genter,et al.  Contribution of the exploration of deep crystalline fractured reservoir of Soultz to the knowledge of enhanced geothermal systems (EGS) , 2010 .

[18]  Thomas Kohl,et al.  Economic evaluation of geothermal reservoir performance through modeling the complexity of the operating EGS in Soultz-sous-Forets , 2014 .

[19]  K. N. Seetharamu,et al.  Fundamentals of the Finite Element Method for Heat and Fluid Flow , 2004 .

[20]  P. Calcagno,et al.  Estimating deep temperatures in the Soultz-sous-Forêts geothermal area (France) from magnetotelluric data , 2015 .

[21]  R. Dipippo.  Part 3 – Geothermal Power Plant Case Studies , 2008 .

[22]  E. Holzbecher.  Modeling Density-Driven Flow in Porous Media , 1998 .

[23]  Albert Genter,et al.  Current Status of the EGS Soultz Geothermal Project (France) , 2010 .

[24]  J. Schmittbuhl,et al.  Natural Permeability in Fractured Triassic Sediments of the Upper Rhine Graben from Deep Geothermal Boreholes , 2014 .

[25]  Chrystel Dezayes,et al.  Structure of the low permeable naturally fractured geothermal reservoir at Soultz , 2010 .

[26]  Yong‐Le Nian,et al.  Enhancing geothermal power generation from abandoned oil wells with thermal reservoirs , 2016 .

[27]  Olaf Kolditz,et al.  Lower‐dimensional interface elements with local enrichment: application to coupled hydro‐mechanical problems in discretely fractured porous media , 2012 .

[28]  Albert Genter,et al.  Structure of hydrothermal convection in the Upper Rhine Graben as inferred from corrected temperature data and basin-scale numerical models , 2012 .

[29]  R. Dipippo.  Geothermal power plants : principles, applications, case studies and environmental impact , 2008 .

[30]  J. Schmittbuhl,et al.  Two-dimensional THM modelling of the large scale natural hydrothermal circulation at Soultz-sous-Forêts , 2014, Geothermal Energy.

[31]  Daniel Moos,et al.  Modeling Shear Stimulation of the Desert Peak EGS Well 27-15 Using a Coupled Thermal-Hydrological-Mechanical Simulator , 2013 .

[32]  L. Pająk,et al.  Modelling geothermal and operating parameters of EGS installations in the lower triassic sedimentary formations of the central Poland area , 2015 .

[33]  Albert Genter,et al.  The EGS Soultz Project (France): From Reservoir Development to Electricity Production. , 2009 .

[34]  Nicolas Cuenot,et al.  Large earthquakes during hydraulic stimulations at the geothermal site of Soultz-sous-Forêts , 2007 .

[35]  S. Rejeki,et al.  Porosity Study for Detail Reservoir Characterization in Darajat Geothermal Field , West Java , Indonesia , 2004 .

[36]  B. Anderson,et al.  Sensitivity Analysis of Low-Temperature Geothermal Reservoirs : Effect of Reservoir Parameters on the Direct Use of Geothermal Energy , 2022 .