Influence of post-process heat treatments on the fatigue crack propagation behaviour of a PBF-LB/M AlSi10Mg alloy

[1]  G. Requena,et al.  Influence of a 265 °C heat treatment on the residual stress state of a PBF-LB/M AlSi10Mg alloy , 2022, Journal of Materials Science.

[2]  M. Easton,et al.  Fatigue behaviour of laser powder bed fusion (L-PBF) Ti–6Al–4V, Al–Si–Mg and stainless steels: a brief overview , 2022, International Journal of Fracture.

[3]  A. Kupsch,et al.  Synchrotron X-ray refraction detects microstructure and porosity evolution during in-situ heat treatments , 2022, Materials Science and Engineering: A.

[4]  S. Beretta,et al.  Progress in the measurement of the cyclic R-curve and its application to fatigue assessment , 2021, Engineering Fracture Mechanics.

[5]  C. Elangeswaran,et al.  Fatigue crack nucleation and growth in laser powder bed fusion AlSi10Mg under as built and post-treated conditions , 2021, Materials & Design.

[6]  U. Ramamurty,et al.  Fracture and fatigue in additively manufactured metals , 2021 .

[7]  S. Schmauder,et al.  Influence of the Grain Size on the Fatigue Initiation Life Curve , 2021, International Journal of Fatigue.

[8]  M. Mohammadi,et al.  Additive manufactured versus cast AlSi10Mg alloy: Microstructure and micromechanics , 2021 .

[9]  J. Kruzic,et al.  Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion , 2021 .

[10]  L. Thijs,et al.  Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg , 2021, Scientific Reports.

[11]  J. Buffière,et al.  Damage tolerant design of additively manufactured metallic components subjected to cyclic loading: State of the art and challenges. , 2021, Progress in materials science.

[12]  E. Maire,et al.  Influence on microstructure, strength and ductility of build platform temperature during laser powder bed fusion of AlSi10Mg , 2020 .

[13]  B. Lu,et al.  Effect of T6 heat treatment on the surface tribological and corrosion properties of AlSi10Mg samples produced by selective laser melting , 2020 .

[14]  Lingyang Yuan,et al.  Role of Mg2Si precipitates size in determining the ductility of A357 cast alloy , 2020 .

[15]  N. Mathe,et al.  The Effect of Stress Relief on the Mechanical and Fatigue Properties of Additively Manufactured AlSi10Mg Parts , 2019, Metals.

[16]  Q. Dong,et al.  Rapid Solidification and Non-equilibrium Phase Constitution in Laser Powder Bed Fusion (LPBF) of AlSi10Mg Alloy: Analysis of Nano-precipitates, Eutectic Phases, and Hardness Evolution , 2019, Metallurgical and Materials Transactions A.

[17]  Annamaria Gisario,et al.  Metal additive manufacturing in the commercial aviation industry: A review , 2019, Journal of Manufacturing Systems.

[18]  H. Idrissi,et al.  Damage mechanisms in selective laser melted AlSi10Mg under as built and different post-treatment conditions , 2019, Materials Science and Engineering: A.

[19]  E. Cerri,et al.  Fatigue crack growth behavior of a selective laser melted AlSi10Mg , 2019, Engineering Fracture Mechanics.

[20]  C. Biffi,et al.  Effect of Optimized Heat Treatments on the Tensile Behavior and Residual Stresses of Selective Laser Melted AlSi10Mg Samples , 2019, Key Engineering Materials.

[21]  M. Vedani,et al.  Effects of Platform Pre-Heating and Thermal-Treatment Strategies on Properties of AlSi10Mg Alloy Processed by Selective Laser Melting , 2018, Metals.

[22]  Q. Dong,et al.  Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy , 2018, Materials Characterization.

[23]  Yusheng Shi,et al.  Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment , 2018, Materials Science and Engineering: A.

[24]  R. Shneck,et al.  Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process , 2018, Materials Science and Engineering: A.

[25]  L. Deibler,et al.  Effect of thermal annealing on microstructure evolution and mechanical behavior of an additive manufactured AlSi10Mg part , 2018, Journal of Materials Research.

[26]  D. Manfredi,et al.  A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy , 2018 .

[27]  J. S. Zuback,et al.  Additive manufacturing of metallic components – Process, structure and properties , 2018 .

[28]  J. Pegues,et al.  Influence of microstructure on fatigue crack nucleation and microstructurally short crack growth of an austenitic stainless steel , 2017 .

[29]  Stefano Beretta,et al.  Fatigue properties of AlSi10Mg obtained by additive manufacturing: Defect-based modelling and prediction of fatigue strength , 2017 .

[30]  Uwe Zerbst,et al.  The cyclic R-curve – Determination, problems, limitations and application , 2017, Engineering Fracture Mechanics.

[31]  N. Uzan,et al.  Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM) , 2017 .

[32]  N. Shamsaei,et al.  Additive manufacturing of fatigue resistant materials: Challenges and opportunities , 2017 .

[33]  Carlo Alberto Biffi,et al.  Low temperature annealing dedicated to AlSi10Mg selective laser melting products , 2017 .

[34]  R. Pippan,et al.  Fatigue crack closure: a review of the physical phenomena , 2017, Fatigue & fracture of engineering materials & structures.

[35]  I. Ashcroft,et al.  The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment , 2016 .

[36]  Uwe Zerbst,et al.  About the fatigue crack propagation threshold of metals as a design criterion – A review , 2016 .

[37]  M. Madia,et al.  Fracture mechanics based assessment of the fatigue strength: approach for the determination of the initial crack size , 2015 .

[38]  Ricardo A. Lebensohn,et al.  Influence of microstructure variability on short crack behavior through postulated micromechanical short crack driving force metrics , 2015 .

[39]  Reinhard Pippan,et al.  Modified NASGRO equation for physically short cracks , 2014 .

[40]  R. Pippan,et al.  Resistance curves for the threshold of fatigue crack propagation , 2013 .

[41]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[42]  A. J. Mcevily,et al.  On the Distinction Between Plasticity- and Roughness-Induced Fatigue Crack Closure , 2012, Metallurgical and Materials Transactions A.

[43]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[44]  H. Degischer,et al.  Precipitation kinetics of Si in aluminium alloys , 2008 .

[45]  K. Tanaka,et al.  4.06 - Modeling of fatigue crack growth , 2007 .

[46]  Diran Apelian,et al.  Fatigue crack growth characteristics in cast Al–Si–Mg alloys: Part I. Effect of processing conditions and microstructure , 2004 .

[47]  R. Pippan,et al.  Asymmetric crack wake plasticity – a reason for roughness induced crack closure , 2004 .

[48]  R. Pippan,et al.  Determination of the length dependence of the threshold for fatigue crack propagation , 2002 .

[49]  E. Y. Chen,et al.  Near-threshold fatigue: a review , 1999 .

[50]  Reinhard Pippan,et al.  The effective threshold of fatigue crack propagation in aluminium alloys. I. The influence of yield stress and chemical composition , 1998 .

[51]  J. Moosbrugger,et al.  Effects of grain size on cyclic plasticity and fatigue crack initiation in nickel , 1997 .

[52]  F. Samuel,et al.  Effect of silicon particles on the fatigue crack growth characteristics of Al-12 Wt Pct Si-0.35 Wt Pct Mg-(0 to 0.02) Wt Pct Sr casting alloys , 1995 .

[53]  A. Navarro,et al.  A MICROSTRUCTURALLY-SHORT FATIGUE CRACK GROWTH EQUATION , 1988 .

[54]  Robert O. Ritchie,et al.  Small fatigue cracks: A statement of the problem and potential solutions , 1986 .

[55]  J. Newman.  A crack opening stress equation for fatigue crack growth , 1984 .

[56]  Anthony W. Thompson,et al.  Roughness-Induced Crack Closure: An Explanation for Microstructurally Sensitive Fatigue Crack Growth , 1983 .

[57]  David Taylor,et al.  FATIGUE CRACK PROPAGATION BEHAVIOUR OF SHORT CRACKS; THE EFFECT OF MICROSTRUCTURE , 1981 .

[58]  M. Madia,et al.  Correlation between quasistatic und fatigue properties of additively manufactured AlSi10Mg using Laser Powder Bed Fusion , 2022, Procedia Structural Integrity.

[59]  M. Madia,et al.  Fatigue and Fracture of Weldments: The IBESS Approach for the Determination of the Fatigue Life and Strength of Weldments by Fracture Mechanics Analysis , 2019 .

[60]  Y. Nadot,et al.  Fatigue resistance of selectively laser melted aluminum alloy under T6 heat treatment , 2018 .

[61]  Y. Akiniwa,et al.  Resistance-curve method for predicting propagation threshold of short fatigue cracks at notches , 1988 .