Friction Slope in Depth-Averaged Flow

Due to the manner in which the friction slope \iS\i\df is calculated, many two-dimensional (2D) depth-averaged models include only bottom friction. Specifically, 2D depth-averaged models that assume vertical channel sidewalls and utilize free-slip boundary conditions do not account for the friction due to the channel sidewalls. The principal intent of this paper is to inform modelers of this largely neglected issue, establish the validity of the aforementioned statement, and introduce a strategy for alleviating the problem. First, the relevant equations are presented. Based on these equations, the problem is clearly explained and interpreted. Further illustration is provided by analyzing a backwater profile in a straight rectangular channel. The one-dimensional (1D) and 2D computed results are compared with Lansford and Mitchell’s experimental data. The 2D numerical solution does not coincide with the experimental data unless the 2D friction slope equation is modified to account for sidewall friction.

[1]  D. Zhao,et al.  Finite‐Volume Two‐Dimensional Unsteady‐Flow Model for River Basins , 1994 .

[2]  Tawatchai Tingsanchali,et al.  2‐D Depth‐Averaged Flow Computation near Groyne , 1990 .

[3]  M. Hanif Chaudhry,et al.  Computation of supercritical free-surface flows , 1988 .

[4]  R L Stockstill,et al.  Finite-Element Model for High-Velocity Channels , 1995 .

[5]  M. Hanif Chaudhry,et al.  Numerical simulation of two-dimensional flow near a spur-dike , 1995 .

[6]  Chin Y. Kuo,et al.  Numerical modelling of subcritical open channel flow using the k-epsilon turbulence model and the penalty function finite element technique , 1985 .

[7]  M. Hanif Chaudhry,et al.  Explicit Methods for 2‐D Transient Free Surface Flows , 1990 .

[8]  Wallace Monroe Lansford,et al.  An investigation of the backwater profile for steady flow in prismatic channels. A report of an investigation conducted by the Engineering Experiment Station, University of Illinois in cooperation with the United States Geological Survey , 1949 .

[9]  Vincent H. Chu,et al.  Computation of Shallow Recirculating Flow Dominated by Friction , 1996 .

[10]  Walter H. Graf,et al.  TURBULENCE CHARACTERISTICS IN ROUGH UNIFORM OPEN-CHANNEL FLOW , 1994 .

[11]  S. Murty Bhallamudi,et al.  Modeling of Unsteady Flow in Curved Channel , 1989 .

[12]  M. Hanif Chaudhry,et al.  Depth-averaged open-channel flow model , 1995 .

[13]  James J. McGuirk,et al.  A depth-averaged mathematical model for the near field of side discharges into open-channel flow , 1978, Journal of Fluid Mechanics.

[14]  Raymond S. Chapman,et al.  APPLICATION OF THE TWO-EQUATION k-E TURBULENCE MODEL TO A TWO-DIMENSIONAL, STEADY, FREE SURFACE FLOW PROBLEM WITH SEPARATION , 1985 .