Noise power properties of a cone-beam CT system for breast cancer detection.

The noise power properties of a cone-beam computed tomography (CT) system dedicated for breast cancer detection were investigated. Uniform polyethylene cylinders of various diameters were scanned under different system acquisition conditions. Noise power spectra were calculated from difference data generated by subtraction between two identical scans. Multidimensional noise power spectra (NPS) were used as the metric to evaluate the noise properties of the breast CT (bCT) under different system acquisition and reconstruction conditions. A comprehensive investigation of the noise properties was performed in regard to system acquisition parameters including kVp, mA, number of cone-beam projection images used, cone angle, and object size. The influence on reconstruction parameters including interpolation method, reconstruction filter, field of view, matrix size, and slice thickness were also studied. Under certain conditions, the zero-dimensional NPS (image variance) was used as a quantitative index to compare the influence from different scan parameters, especially the radiation dose. If the total scan dose is changed by linearly changing the total number of projection images while the dose per frame is kept constant, the noise power has a linear relationship with the reciprocal of the total dose. If the total scan dose is changed by linearly changing the dose per frame while the total number of projection images is kept constant, the noise power has a quadratic relationship with the reciprocal of the total dose. With the same amount of total dose, using fewer projection images results in lower image noise power in the CT image. Quantitative results from this noise power analysis provide guidance for the bCT system operation, optimization, and data reconstruction.

[1]  Bruno De Man,et al.  An outlook on x-ray CT research and development. , 2008, Medical physics.

[2]  J. Boone,et al.  Dedicated breast CT: initial clinical experience. , 2008, Radiology.

[3]  J. Galvin,et al.  A cone beam CT-Based Study for Clinical Target Definition Using Pelvic Anatomy During Postprostatectomy Radiotherapy. , 2008, International journal of radiation oncology, biology, physics.

[4]  Selin Carkaci,et al.  Dedicated cone-beam breast CT: feasibility study with surgical mastectomy specimens. , 2007, AJR. American journal of roentgenology.

[5]  Fang-Fang Yin,et al.  Cone-beam CT localization of internal target volumes for stereotactic body radiotherapy of lung lesions. , 2007, International journal of radiation oncology, biology, physics.

[6]  J H Siewerdsen,et al.  Soft-tissue detectability in cone-beam CT: evaluation by 2AFC tests in relation to physical performance metrics. , 2007, Medical physics.

[7]  Y. Korogi,et al.  A Cone-Beam Volume CT Using a 3D Angiography System with a Flat Panel Detector of Direct Conversion Type: Usefulness for Superselective Intra-arterial Chemotherapy for Head and Neck Tumors , 2007, American Journal of Neuroradiology.

[8]  Moyed Miften,et al.  Commissioning and clinical implementation of a mega-voltage cone beam CT system for treatment localization. , 2007, Medical physics.

[9]  Lingyun Chen,et al.  Visibility of microcalcification in cone beam breast CT: effects of X-ray tube voltage and radiation dose. , 2007, Medical physics.

[10]  M F McNitt-Gray,et al.  Application of the noise power spectrum in modern diagnostic MDCT: part I. Measurement of noise power spectra and noise equivalent quanta , 2007, Physics in medicine and biology.

[11]  Kai Yang,et al.  Computer modeling of the spatial resolution properties of a dedicated breast CT system. , 2007, Medical physics.

[12]  J. Boone,et al.  Evaluation of the spatial resolution characteristics of a cone-beam breast CT scanner. , 2006, Medical physics.

[13]  Samta Thacker,et al.  Evaluating the impact of X-ray spectral shape on image quality in flat-panel CT breast imaging. , 2007, Medical physics.

[14]  Ann Wenzel,et al.  Accuracy of cone beam dental CT, intraoral digital and conventional film radiography for the detection of periapical lesions. An ex vivo study in pig jaws , 2007, Clinical Oral Investigations.

[15]  John M. Boone,et al.  Computed Tomography for Imaging the Breast , 2006, Journal of Mammary Gland Biology and Neoplasia.

[16]  John M Boone,et al.  Breast CT: potential for breast cancer screening and diagnosis. , 2006, Future oncology.

[17]  Aruna A. Vedula,et al.  A computer simulation study comparing lesion detection accuracy with digital mammography, breast tomosynthesis, and cone-beam CT breast imaging. , 2006, Medical physics.

[18]  John M Boone,et al.  Technique factors and their relationship to radiation dose in pendant geometry breast CT. , 2005, Medical physics.

[19]  Christopher J. Zarowski,et al.  An Introduction to Numerical Analysis for Electrical and Computer Engineers: Zarowski/Intro to Numerical Analysis , 2004 .

[20]  Ruola Ning,et al.  Why should breast tumour detection go three dimensional? , 2003, Physics in medicine and biology.

[21]  Jeffrey H. Siewerdsen,et al.  Three-dimensional NEQ transfer characteristics of volume CT using direct- and indirect-detection flat-panel imagers , 2003, SPIE Medical Imaging.

[22]  D. Jaffray,et al.  A framework for noise-power spectrum analysis of multidimensional images. , 2002, Medical physics.

[23]  Biao Chen,et al.  Cone-beam volume CT breast imaging: feasibility study. , 2002, Medical physics.

[24]  J. Boone,et al.  Dedicated breast CT: radiation dose and image quality evaluation. , 2001, Radiology.

[25]  J M Boone,et al.  Determination of the presampled MTF in computed tomography. , 2001, Medical physics.

[26]  Avinash C. Kak,et al.  Principles of computerized tomographic imaging , 2001, Classics in applied mathematics.

[27]  H. Blume,et al.  DQE(f) of four generations of computed radiography acquisition devices. , 1995, Medical physics.

[28]  P. Judy,et al.  The noise power spectrum of CT images. , 1987, Physics in medicine and biology.

[29]  M. Yaffe,et al.  Signal-to-noise properties of mammographic film-screen systems. , 1985, Medical physics.

[30]  L. Feldkamp,et al.  Practical cone-beam algorithm , 1984 .

[31]  C.E. Shannon,et al.  Communication in the Presence of Noise , 1949, Proceedings of the IRE.

[32]  R L Morin,et al.  A practical method to measure the MTF of CT scanners. , 1982, Medical physics.

[33]  G T Barnes,et al.  Radiographic mottle: a comprehensive theory. , 1982, Medical physics.

[34]  S. Riederer.  Application of the noise power spectrum to positron emission CT self-absorption correction. , 1981, Medical Physics (Lancaster).

[35]  K. Hanson,et al.  Detectability in computed tomographic images. , 1979, Medical physics.

[36]  S. Riederer,et al.  The noise power spectrum in computed X-ray tomography. , 1978, Physics in medicine and biology.

[37]  S J Riederer,et al.  Noise Due to Photon Counting Statistics in Computed X‐Ray Tomography , 1977, Journal of computer assisted tomography.