A gas sensor array for the simultaneous detection of multiple VOCs

Air quality around the globe is declining and public health is seriously threatened by indoor air pollution. Typically, indoor air pollutants are composed of a series of volatile organic compounds (VOCs) that are generally harmful to the human body, especially VOCs with low molecular weights (less than 100 Da). Moreover, in some situations, more than one type of VOC is present; thus, a device that can detect one or more VOCs simultaneously would be most beneficial. Here, we synthesized a sensor array with 4 units to detect 4 VOCs: acetone (unit 1), benzene (unit 2), methanol (unit 3) and formaldehyde (unit 4) simultaneously. All units were simultaneously exposed to 2.5 ppm of all four VOCs. The sensitivity of unit 1 was 14.67 for acetone and less than 2.54 for the other VOCs. The sensitivities of units 2, 3 and 4 to benzene, methanol and formaldehyde were 2 18.64, 20.98 and 17.26, respectively, and less than 4.01 for the other VOCs. These results indicated that the sensor array exhibited good selectivity and could be used for the real-time monitoring of indoor air quality. Thus, this device will be useful in situations requiring the simultaneous detection of multiple VOCs.

[1]  N. N. Toan,et al.  Gas sensing with semiconducting perovskite oxide LaFeO3 , 2003 .

[2]  Rahul R. Shah,et al.  Principles for Measurement of Chemical Exposure Based on Recognition-Driven Anchoring Transitions in Liquid Crystals , 2001, Science.

[3]  E. Traversa,et al.  NO2 sensitive LaFeO3 thin films prepared by r.f. sputtering , 1995 .

[4]  H. Friedrich,et al.  Towards stable catalysts by controlling collective properties of supported metal nanoparticles. , 2013, Nature materials.

[5]  Jifan Hu,et al.  CO2 sensing properties and mechanism of nanocrystalline LaFeO3 sensor , 2013 .

[6]  Maciej Cieplak,et al.  Selective electrochemical sensing of human serum albumin by semi-covalent molecular imprinting. , 2015, Biosensors & bioelectronics.

[7]  D. Matatagui,et al.  A magnonic gas sensor based on magnetic nanoparticles. , 2015, Nanoscale.

[8]  F. Iacomi,et al.  Synthesis of nanocrystalline La–Pb–Fe–O perovskite and methanol-sensing characteristics , 2012 .

[9]  Bao-jiao Gao,et al.  Preparation and recognition performance of cholic acid-imprinted material prepared with novel surface-imprinting technique , 2009 .

[10]  G. Wulff,et al.  Enzyme-like catalysis by molecularly imprinted polymers. , 2002, Chemical reviews.

[11]  S. Phanichphant,et al.  Semiconducting metal oxides as sensors for environmentally hazardous gases , 2011 .

[12]  K. Saijo,et al.  Induction of human autologous cytotoxic T lymphocytes on formalin-fixed and paraffin-embedded tumour sections , 1995, Nature Genetics.

[13]  Radislav A. Potyrailo,et al.  Morpho butterfly wing scales demonstrate highly selective vapour response , 2007 .

[14]  S. Patel,et al.  Development of indium tin oxide thin film toluene sensor , 2015 .

[15]  X. Jiao,et al.  Preparation of porous SnO2 thin film with high gasoline sensing performance , 2014 .

[16]  Zofia Iskierko,et al.  Molecularly imprinted polymers for separating and sensing of macromolecular compounds and microorganisms. , 2016, Biotechnology advances.

[17]  I. Concina,et al.  Chemical Tuning versus Microstructure Features in Solid-State Gas Sensors: LaFe1-xGaxO3, a Case Study , 2014 .

[18]  Y. Mortazavi,et al.  Highly sensitive and selective Gd2O3-doped SnO2 ethanol sensors synthesized by a high temperature and pressure solvothermal method in a microreactor , 2016 .

[19]  Shuanghui Li,et al.  The highly promotive sensing performance of a single cerium doped SnO2 nanobelt sensor to ethanol , 2016 .

[20]  Sung Yong Kang,et al.  Selective detection of low concentration toluene gas using Pt-decorated carbon nanotubes sensors , 2016 .

[21]  Q. Wei,et al.  Effect of In2O3 nanofiber structure on the ammonia sensing performances of In2O3/PANI composite nanofibers , 2016, Journal of Materials Science.

[22]  G. N. Chaudhari,et al.  Acetone gas-sensing performance of Sr-doped nanostructured LaFeO3 semiconductor prepared by citrate sol-gel route , 2011 .

[23]  김승준,et al.  Validation of Human HazChem Array using VOC Exposure in HL-60 Cells , 2008 .

[24]  Yumin Zhang,et al.  A high sensitivity gas sensor for formaldehyde based on silver doped lanthanum ferrite , 2014 .

[25]  M. Ptak,et al.  A new approach in the synthesis of La(1-x)Gd(x)FeO3 perovskite nanoparticles--structural and magnetic characterization. , 2015, Dalton transactions.

[26]  Buddy D. Ratner,et al.  Template-imprinted nanostructured surfaces for protein recognition , 1999, Nature.

[27]  Michael C. McAlpine,et al.  Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors. , 2007, Nature materials.

[28]  D. Uy,et al.  Infrared Spectroscopy of the Amidogen Ion, NH+2 , 1996 .

[29]  M. E. Foster,et al.  Tunable Electrical Conductivity in Metal-Organic Framework Thin-Film Devices , 2014, Science.

[30]  Q. Sattentau,et al.  A potential molecular mechanism for hypersensitivity caused by formalin-inactivated vaccines , 2006, Nature Medicine.

[31]  Peng Sun,et al.  NH3 gas sensing performance enhanced by Pt-loaded on mesoporous WO3 , 2017 .