New cool concrete for building envelopes and urban paving: Optics-energy and thermal assessment in dynamic conditions

Abstract Urban Heat Island (UHI) is an acknowledged effect that causes higher temperatures in urban areas compared to the surrounding rural areas. Such urban overheating directly increases buildings’ energy demand for cooling, to reach thermal comfort conditions in the indoor areas. This phenomenon increases energy consumption and, consequently, greenhouse gas emissions in the cooling season. Moreover, it seriously threatens citizens’ environmental comfort in urban areas. In this context, the use of cool (high solar reflectance and thermal emittance) materials has been widely acknowledged as a promising passive UHI mitigation solution. However, the application of such cool materials does not comply with the environmental preservation of cultural heritage sites, for architectural reasons. In fact, historical districts, which constitute a large part of European building stock, are often characterized by non-cool, dark colored materials. Therefore, the most common, light-colored cool solutions cannot be applied, since regulations on such protected areas are strict. Indeed, the above-mentioned regulations do not allow the modification of visible parts of the building. In this paper, innovative concrete elements with infrared-reflective (IR) pigments are presented to be used as i) urban paving, ii) building facade elements, and iii) retrofit strategies for walls and pavements in historical buildings. Both in-lab and in-field characterization of the samples are carried out with dynamically varying thermal and radiative forcing. Results indicate that prototypes with IR pigments have higher solar reflectance, up to +15.8% compared to standard concrete prototypes and +12.5% with respect to same color prototypes without high infrared reflective pigments. Moreover, they are able to maintain surface temperatures that are up to −10.6 °C lower with respect to non-IR samples. These results confirm that the presented composite material represents a good solution for passive cooling at building and inter-building scale.

[1]  Francesca Thiebat,et al.  An integrated design approach to the development of a vegetal-based thermal plaster for the energy retrofit of buildings , 2016 .

[2]  David J. Sailor,et al.  Mitigation of urban heat islands: materials, utility programs, updates , 1995 .

[3]  D. Civco,et al.  THE DIMENSIONS OF GLOBAL URBAN EXPANSION: ESTIMATES AND PROJECTIONS FOR ALL COUNTRIES, 2000–2050 , 2011 .

[4]  M. Santamouris.  Cooling the cities – A review of reflective and green roof mitigation technologies to fight heat island and improve comfort in urban environments , 2014 .

[5]  Luisa F. Cabeza,et al.  Thermal assessment of extensive green roofs as passive tool for energy savings in buildings , 2016 .

[6]  Luisa F. Cabeza,et al.  Single layer mortars with microencapsulated PCM: Study of physical and thermal properties, and fire behaviour , 2016 .

[7]  Ferdinando Salata,et al.  How high albedo and traditional buildings’ materials and vegetation affect the quality of urban microclimate. A case study , 2015 .

[8]  Arild Gustavsen,et al.  Accelerated aging of treated aluminum for use as a cool colored material for facades , 2016 .

[9]  Anna Laura Pisello,et al.  Integrated Thermal-Energy Analysis of Innovative Translucent White Marble for Building Envelope Application , 2014 .

[10]  Yupeng Wang,et al.  Characterizing urban heat island in Montreal (Canada)—Effect of urban morphology , 2015 .

[11]  John E. Taylor,et al.  The impact of natural ventilation on building energy requirement at inter-building scale , 2016 .

[12]  John E. Taylor,et al.  Modeling building occupant network energy consumption decision-making: The interplay between network structure and conservation , 2012 .

[13]  Andrea Luigi Facci,et al.  Proton exchange membrane fuel cell for cooperating households: A convenient combined heat and power solution for residential applications , 2015 .

[14]  Peter Andreas Sattrup,et al.  The urban canyon and building energy use: Urban density versus daylight and passive solar gains , 2011 .

[15]  Anna Laura Pisello,et al.  Outdoor Thermal and Visual Perception of Natural Cool Materials for Roof and Urban Paving , 2015 .

[16]  Lambros T. Doulos,et al.  Passive cooling of outdoor urban spaces. The role of materials , 2004 .

[17]  Canbing Li,et al.  Interaction between urban microclimate and electric air-conditioning energy consumption during high temperature season , 2014 .

[18]  H. Bulkeley,et al.  A survey of urban climate change experiments in 100 cities , 2013, Global environmental change : human and policy dimensions.

[19]  C. Silva,et al.  Green roofs energy performance in Mediterranean climate , 2016 .

[20]  A. Rosenfeld,et al.  Residential cooling loads and the urban heat island—the effects of albedo , 1988 .

[21]  Rongpu Zhang,et al.  The effects of particle size distribution on the optical properties of titanium dioxide rutile pigments and their applications in cool non-white coatings , 2014 .

[22]  A. Holtslag,et al.  Temporal and spatial variability of urban heat island and thermal comfort within the Rotterdam agglomeration , 2015 .

[23]  Ahmed Memon Rizwan,et al.  A review on the generation, determination and mitigation of Urban Heat Island , 2008 .

[24]  Anna Laura Pisello,et al.  Natural Materials for Thermal Insulation and Passive Cooling Application , 2015 .

[25]  T. Oke.  The energetic basis of the urban heat island , 1982 .

[26]  V. John,et al.  Estimating thermal performance of cool colored paints , 2010 .

[27]  Anna Laura Pisello,et al.  On the thermal and visual pedestrians' perception about cool natural stones for urban paving: A field survey in summer conditions , 2016 .

[28]  Ronnen Levinson,et al.  A novel technique for the production of cool colored concrete tile and asphalt shingle roofing products , 2009 .

[29]  Y. Yasuoka,et al.  Assessment with satellite data of the urban heat island effects in Asian mega cities , 2006 .

[30]  M. Santamouris,et al.  Passive and active cooling for the outdoor built environment – Analysis and assessment of the cooling potential of mitigation technologies using performance data from 220 large scale projects , 2017 .

[31]  Jonas Allegrini,et al.  Influence of the urban microclimate in street canyons on the energy demand for space cooling and heating of buildings , 2012 .

[32]  Steve Millard,et al.  Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC) , 2009 .

[33]  Benedetto Nastasi,et al.  Renewable Hydrogen Potential for Low-carbon Retrofit of the Building Stocks☆ , 2015 .

[34]  M. Santamouris,et al.  On the development, optical properties and thermal performance of cool colored coatings for the urban environment , 2007 .

[35]  H. Akbari,et al.  Methods of creating solar-reflective nonwhite surfaces and their application to residential roofing materials , 2005 .