Effect of confining pressure on shear fracture behavior and surface morphology of granite by the short core in compression test

[1]  Xibing Li,et al.  Fracture mechanism and energy evolution of sandstone with a circular inclusion , 2022, International Journal of Rock Mechanics and Mining Sciences.

[2]  Xibing Li,et al.  Experimental investigations of static mechanical properties and failure characteristics of damaged diorite after dynamic triaxial compression , 2022, International Journal of Rock Mechanics and Mining Sciences.

[3]  T. Yin,et al.  Experimental investigation on the effect of open fire on the tensile properties and damage evolution behavior of granite , 2022, International Journal of Damage Mechanics.

[4]  M. Ayatollahi,et al.  Size effect in true mode II fracturing of rocks: Theory and experiment , 2022, European Journal of Mechanics - A/Solids.

[5]  Qibin Lin,et al.  Experimental Investigation of Plane Shear Fracture Characteristics of Sandstone after Cyclic Freeze–Thaw Treatments , 2021, Theoretical and Applied Fracture Mechanics.

[6]  Diyuan Li,et al.  New criterion for the spalling failure of deep rock engineering based on energy release , 2021, International Journal of Rock Mechanics and Mining Sciences.

[7]  Diyuan Li,et al.  Deformation and fracture behavior of granite by the short core in compression method with 3D digital image correlation , 2021, Fatigue & Fracture of Engineering Materials & Structures.

[8]  Yun Wu,et al.  Effects of confining pressure on acoustic emission and failure characteristics of sandstone , 2021, International Journal of Mining Science and Technology.

[9]  K. Xia,et al.  Dynamic Mode Ⅱ fracture behavior of rocks under hydrostatic pressure using the short core in compression (SCC) method , 2021, International Journal of Mining Science and Technology.

[10]  F. Gong,et al.  Tensile Strength and Fracture Surface Morphology of Granite Under Confined Direct Tension Test , 2021, Rock Mechanics and Rock Engineering.

[11]  Hongwei Yang,et al.  Determination of Fracture Toughness of Mode I Fractures from Three-Point Bending Tests at Elevated Confining Pressures , 2021, Rock Mechanics and Rock Engineering.

[12]  Liang Zhang,et al.  Acoustic emission, damage and cracking evolution of intact coal under compressive loads: Experimental and discrete element modelling , 2021, Engineering Fracture Mechanics.

[13]  Z. Cui,et al.  An Experimental Investigation of the Influence of Loading Rate on Rock Tensile Strength and Split Fracture Surface Morphology , 2021, Rock Mechanics and Rock Engineering.

[14]  Jianfeng Yang,et al.  Investigating the effect of confining pressure on fracture toughness of CO2-saturated coals , 2021 .

[15]  Diyuan Li,et al.  Deformation and strength properties of completely decomposed granite in a fault zone , 2021 .

[16]  Diyuan Li,et al.  Experimental and Numerical Analysis of Mode I Fracture Process of Rock by Semi-Circular Bend Specimen , 2021 .

[17]  H. Jing,et al.  Morphological features of shear-formed fractures developed in a rock bridge , 2020 .

[18]  K. Peng,et al.  Evolutionary characteristics of mode-I fracture toughness and fracture energy in granite from different burial depths under high-temperature effect , 2020 .

[19]  R. Yuan,et al.  A shear hardening model for cohesive element method and its application in modeling shear hydraulic fractures in fractured reservoirs , 2020 .

[20]  R. Cao,et al.  Effects of cyclic freeze-thaw treatments on the fracture characteristics of sandstone under different fracture modes: Laboratory testing , 2020 .

[21]  Diyuan Li,et al.  Deformation and fracture of circular tunnels under non-tectonic stresses and its support control , 2020, European Journal of Environmental and Civil Engineering.

[22]  K. Xia,et al.  Evaluation of the short core in compression (SCC) method for measuring mode II fracture toughness of rocks , 2020 .

[23]  M. Hosseini,et al.  Effects of temperature and confining pressure on the mode I and mode II fracture toughness of cement mortar , 2019, Theoretical and Applied Fracture Mechanics.

[24]  Xibing Li,et al.  Experimental investigation on mode I fracture characteristics of granite after cyclic heating and cooling treatments , 2019, Engineering Fracture Mechanics.

[25]  Lei Weng,et al.  On the tensile mechanical characteristics of fine-grained granite after heating/cooling treatments with different cooling rates , 2019, Engineering Geology.

[26]  Jiang Xu,et al.  Progressive failure behaviors and crack evolution of rocks under triaxial compression by 3D digital image correlation , 2019, Engineering Geology.

[27]  Yaoqing Hu,et al.  Study of the deformation characteristics and fracture criterion of the mixed mode fracture toughness of gypsum interlayers from Yunying salt cavern under a confining pressure , 2018, Journal of Natural Gas Science and Engineering.

[28]  Shangxu Wang,et al.  The influences of mode II loading on fracture process in rock using acoustic emission energy , 2018 .

[29]  M. Hosseini,et al.  Effects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone) , 2018 .

[30]  Marion Bost,et al.  Experimental Study of the Shear Strength of Bonded Concrete–Rock Interfaces: Surface Morphology and Scale Effect , 2017, Rock Mechanics and Rock Engineering.

[31]  Hongbao Zhao,et al.  Formation and fractal characteristics of main fracture surface of red sandstone under restrictive shear creep , 2017 .

[32]  X. Fan,et al.  Effect of water absorption ratio on tensile strength of red sandstone and morphological analysis of fracture surfaces , 2017 .

[33]  Y. Obara,et al.  Estimation of Mode I Fracture Toughness of Rock by Semi-Circular Bend Test under Confining Pressure Condition☆ , 2017 .

[34]  Shaojun Li,et al.  Experimental study on the prediction of rockburst hazards induced by dynamic structural plane shearing in deeply buried hard rock tunnels , 2016 .

[35]  Bin He,et al.  Mixed-Mode Fracture Behavior and Related Surface Topography Feature of a Typical Sandstone , 2016, Rock Mechanics and Rock Engineering.

[36]  S. Tang.  The effect of T-stress on the fracture of brittle rock under compression , 2015 .

[37]  Jizhou Song,et al.  Effect of Confining Pressure on Stress Intensity Factors for Cracked Brazilian Disk , 2015 .

[38]  Hongwei Zhou,et al.  Box-counting methods to directly estimate the fractal dimension of a rock surface , 2014 .

[39]  H. Mitri,et al.  Dynamic behaviour of mining-induced fault slip , 2014 .

[40]  Jian Zhao,et al.  Effect of loading rate on fracture toughness and failure micromechanisms in marble , 2013 .

[41]  Liu Lian-feng.  INVESTIGATION ON MESO-FRACTURE MECHANISM OF BASALT WITH OFFSET NOTCH BASED ON IN-SITU THREE-POINT BENDING TESTS , 2013 .

[42]  T. Backers,et al.  ISRM Suggested Method for the Determination of Mode II Fracture Toughness , 2012, Rock Mechanics and Rock Engineering.

[43]  M. Ayatollahi,et al.  On the use of an anti‐symmetric four‐point bend specimen for mode II fracture experiments , 2011 .

[44]  M.R.M. Aliha,et al.  Mode I and Mode II Fracture Toughness Testing for a Coarse Grain Marble , 2006 .

[45]  Yujing Jiang,et al.  Estimating the relation between surface roughness and mechanical properties of rock joints , 2006 .

[46]  Hideki Shimada,et al.  Combined effects of increasing temperature and confining pressure on the fracture toughness of clay bearing rocks , 2004 .

[47]  G. Dresen,et al.  New data on mode II fracture toughness of rock from the punch-through shear test , 2004 .

[48]  Zongqi Sun,et al.  Shear fracture (Mode II) of brittle rock , 2003 .

[49]  T. Babadagli,et al.  Fractal characteristics of rocks fractured under tension , 2003 .

[50]  N. Al-Shayea.  Comparing Reservoir and Outcrop Specimens for Mixed Mode I–II Fracture Toughness of a Limestone Rock Formation at Various Conditions , 2002 .

[51]  Erik Rybacki,et al.  Rock fracture toughness testing in Mode II—punch-through shear test , 2002 .

[52]  V. Hajiabdolmajid,et al.  Modelling brittle failure of rock , 2002 .

[53]  Sahel N. Abduljauwad,et al.  Effects of confining pressure and temperature on mixed-mode (I–II) fracture toughness of a limestone rock , 2000 .

[54]  B. Stimpson,et al.  Identifying crack initiation and propagation thresholds in brittle rock , 1998 .

[55]  Balázs Vásárhelyi,et al.  Influence of pressure on the crack propagation under mode I loading in anisotropic gneiss , 1997 .

[56]  J. Roegiers,et al.  Determination Of In-Situ Fracture Toughness , 1993 .

[57]  W. Müller.  Brittle crack growth in rocks , 1986 .

[58]  S. Melin.  When does a crack grow under mode II conditions? , 1986, International Journal of Fracture.

[59]  R. A. Schmidt,et al.  Effect of confining pressureon fracture toughness of Indiana limestone , 1977 .

[60]  R. A. Schmidt,et al.  Stress intensity factors of edge crack specimens under hydrostatic compression with application to measuring fracture toughness of rock , 1976 .