Design of an Endoscopic Biopsy Needle With Flexural Members

As a minimally invasive means of extracting a tissue sample from a patient, current endoscopic biopsy needles generally do not preserve tissue histology and often require multiple attempts to obtain a tissue sample. This paper presents an endoscopic biopsy needle with internal flexures that enables tissue to enter the hollow needle and then be severed from the surrounding tissue when the needle is withdrawn. Using force-deflection and sample weight data from 10 scaled prototypes, variations of a flexural design captured 1.1 grams of a tissue phantom on average, as compared to wedge-type designs that averaged 0.7–0.8 grams. Sample mass exhibited an increase in mass as the feature angle decreased. Peak entrance forces (P2) for the flexure design were lower than for both wedge and extended wedge designs, and resistance forces (S2) were higher upon needle extraction. A low-angle (15 and 30 deg) feature also produced a lower entrance friction (S1) and higher exit resistance (S2) compared with 45 and 60 deg features. These results suggest that a biopsy needle with 15 deg flexures could increase sample length and mass as well as sampling success rates for core biopsy procedures. Future tests of the flexural biopsy needle design will use this information to determine dimensions for laser cut features of 1 scale needles. DOI: 10.1115/1.2355693

[1]  F. G. Evans,et al.  Strength of biological materials , 1970 .

[2]  H. Welch,et al.  The role of overdiagnosis and reclassification in the marked increase of esophageal adenocarcinoma incidence. , 2005, Journal of the National Cancer Institute.

[3]  M. Feinleib.  National Center for Health Statistics (NCHS) , 2005 .

[4]  V. Rich.  Personal communication , 1989, Nature.

[5]  E. A. Avellone,et al.  Marks' Standard Handbook for Mechanical Engineers , 1916 .

[6]  R.W.B. Stephens,et al.  IEEE ultrasonics symposium , 1972 .

[7]  P. Mcgrath,et al.  Surgical management of pancreatic carcinoma. , 1996, Seminars in oncology.

[8]  Allison M. Okamura,et al.  Modeling of needle insertion forces for robot-assisted percutaneous therapy , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[9]  Allison M. Okamura,et al.  Force modeling for needle insertion into soft tissue , 2004, IEEE Transactions on Biomedical Engineering.

[10]  Rajni V. Patel,et al.  Needle insertion into soft tissue: a survey. , 2007, Medical engineering & physics.

[11]  I. Sakuma,et al.  Combined compression and elongation experiments and non-linear modelling of liver tissue for surgical simulation , 2004, Medical and Biological Engineering and Computing.

[12]  J. Barbera,et al.  Contact mechanics , 1999 .

[13]  L. Kozak,et al.  Ambulatory and inpatient procedures in the United States, 1996. , 1998, Vital and health statistics. Series 13, Data from the National Health Survey.

[14]  G. Chryssolouris.  Laser Machining: Theory and Practice , 1991 .

[15]  J. Desai,et al.  Measuring Forces in Liver Cutting: New Equipment and Experimental Results , 2003, Annals of Biomedical Engineering.

[16]  Jiju Antony,et al.  Design of experiments for engineers and scientists , 2003 .

[17]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[18]  M. O’Donnell,et al.  Measuring tissue elastic properties using acoustic radiation force on laser-generated bubbles , 2003, IEEE Symposium on Ultrasonics, 2003.