Modeling and simulation of compressed air storage in caverns: A case study of the Huntorf plant

Abstract An accurate dynamic simulation model for compressed air energy storage (CAES) inside caverns has been developed. Huntorf gas turbine plant is taken as the case study to validate the model. Accurate dynamic modeling of CAES involves formulating both the mass and energy balance inside the storage. In the ground reservoir based storage bed, the heat transfer from the ground reservoir plays an important role in predicting the cavern storage behavior and is therefore taken into account. The heat transfer coefficient between the cavern walls and the air inside the cavern is accurately modeled based on the real tests data obtained from the Huntorf plant trial tests. Finally the model is validated based on a typical daily schedule operation of the Huntorf plant. A comparison is also made with the results obtained from adiabatic and isothermal assumptions inside the cavern to gain further insights. Such accurate modeling of cavern dynamics will affect the design of the cavern storage beds for future explorations.

[1]  G. Joos,et al.  Supercapacitor Energy Storage for Wind Energy Applications , 2007, IEEE Transactions on Industry Applications.

[2]  R. Takahashi,et al.  An Application of Flywheel Energy Storage System for Wind Energy Conversion , 2005, 2005 International Conference on Power Electronics and Drives Systems.

[3]  V. Fthenakis,et al.  Coupling PV and CAES power plants to transform intermittent PV electricity into a dispatchable electricity source , 2008 .

[4]  Nate Blair,et al.  Modeling the Benefits of Storage Technologies to Wind Power , 2008 .

[5]  Rafic Younes,et al.  Study and design of a hybrid wind-diesel-compressed air energy storage system for remote areas , 2010 .

[6]  P. Seferlis,et al.  Power management strategies for a stand-alone power system using renewable energy sources and hydrogen storage , 2009 .

[7]  Shuai Lu,et al.  Wide-Area Energy Storage and Management system to Balance Intermittent Resources in the Bonneville Power Administration and California ISO Control Areas , 2008 .

[8]  Albert J. Giramonti,et al.  Conceptual design of compressed air energy storage electric power systems , 1978 .

[9]  Georges Garabeth Salgi,et al.  System behaviour of compressed-air energy-storage in Denmark with a high penetration of renewable energy sources , 2008 .

[10]  R. Winterton,et al.  Technical notes: where did the Dittus and Boelter equation come from , 1998 .

[11]  I. Glendenning Long-term prospects for compressed air storage , 1976 .

[12]  Alfred J. Cavallo,et al.  Controllable and affordable utility-scale electricity from intermittent wind resources and compressed air energy storage (CAES) , 2007 .

[13]  Li Wang,et al.  Dynamic Stability Enhancement and Power Flow Control of a Hybrid Wind and Marine-Current Farm Using SMES , 2009, IEEE Transactions on Energy Conversion.

[14]  D. R. Hounslow,et al.  The development of a combustion system for a 110 MW CAES plant , 1998 .

[15]  E. Lerch Storage of fluctuating wind energy , 2007, 2007 European Conference on Power Electronics and Applications.

[16]  X.Y. Wang,et al.  Determination of Battery Storage Capacity in Energy Buffer for Wind Farm , 2008, IEEE Transactions on Energy Conversion.

[17]  Siddhartha Kumar Khaitan,et al.  Charging dynamics of metal hydride hydrogen storage bed for small wind hybrid systems , 2011 .

[18]  D. J. Swider,et al.  Compressed Air Energy Storage in an Electricity System With Significant Wind Power Generation , 2007, IEEE Transactions on Energy Conversion.

[19]  Jeffery B. Greenblatt,et al.  Baseload wind energy: modeling the competition between gas turbines and compressed air energy storage for supplemental generation , 2007 .