Parametric study on flow and heat transfer characteristics of porous wick evaporator based on AMTEC

By establishing an axial symmetric invariable temperature phase change interface model of porous wick evaporator based on alkali metal thermal-to-electric converter (AMTEC), a parametric study has been implemented to explore the impact of effective thermal conductivity model, working fluid, wick material, porosity and particle size of porous wick on the flow and heat transfer characteristics. The results indicate that the inner surface temperature profile of wick is closely dependent on effective thermal conductivity models; it is the minimum for series model while the highest for parallel model. The inner surface temperature of wick with Na-K alloy as working fluid is obviously lower than that with sodium or potassium as working fluid. The wick made of refractory ceramics makes the minimum of inner surface temperature, while the one with nickel appears the highest temperature. Increasing the porosity can reduce the pressure drop in the wick, but also increases the temperature of evaporator.

[1]  Lan Xiao,et al.  A parabolic dish/AMTEC solar thermal power system and its performance evaluation , 2010 .

[2]  Lan Xiao,et al.  A review on advances in alkali metal thermal to electric converters (AMTECs) , 2009 .

[3]  A. Nakayama,et al.  Conjugate numerical analysis of flow and heat transfer with phase change in a miniature flat plate CPL evaporator , 2009 .

[4]  J. Carson,et al.  Predicting the effective thermal conductivity of unfrozen, porous foods , 2006 .

[5]  W. Davis,et al.  Evaporative heat transfer of liquid potassium in porous media , 1974 .

[6]  John Goldak,et al.  Numerical analysis of heat and mass transfer in the capillary structure of a loop heat pipe , 2006 .

[7]  Mohamed S. El-Genk,et al.  AMTEC/TE static converters for high energy utilization, small nuclear power plants , 2004 .

[8]  Kotaro Tanaka,et al.  Concept design of solar thermal receiver using alkali metal thermal to electric converter (AMTEC) , 2008 .

[9]  Mohamed S. El-Genk,et al.  Performance analyses of an Nb–1Zr/C-103 vapor anode multi-tube alkali-metal thermal-to-electric conversion cell , 2001 .

[10]  Michael Schuller,et al.  Design and integration of a solar AMTEC power system with an advanced global positioning satellite , 1997 .

[11]  Edson Bazzo,et al.  Operation characteristics of a small-scale capillary pumped loop , 2003 .

[12]  Marc Prat,et al.  Heat and mass transfer with phase change in aporous structure partially heated: continuum model andpore network simulations , 1999 .

[13]  Xue-Song Bai,et al.  Experimental research on heat transfer to liquid sodium and its incipient boiling wall superheat in an annulus , 2006 .

[15]  J. Ochterbeck,et al.  Numerical Investigation of the Steady State Operation of a Cylindrical Capillary Pumped Loop Evaporator , 2000, Heat Transfer: Volume 4.

[16]  N. Pan,et al.  Predictions of effective physical properties of complex multiphase materials , 2008 .

[17]  G. P. Peterson,et al.  3D heat transfer analysis in a loop heat pipe evaporator with a fully saturated wick , 2011 .

[18]  Mohamed S. El-Genk,et al.  Performance comparison of potassium and sodium vapor anode, multi-tube AMTEC converters , 2002 .

[19]  Yiding Cao,et al.  Conjugate analysis of a flat-plate type evaporator for capillary pumped loops with three-dimensional vapor flow in the groove , 1994 .

[20]  M.A.K. Lodhi,et al.  An overview of advanced space/terrestrial power generation device: AMTEC , 2001 .

[21]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.