Solvent/non-solvent sintering: a novel route to create porous microsphere scaffolds for tissue regeneration.

Solvent/non-solvent sintering creates porous polymeric microsphere scaffolds suitable for tissue engineering purposes with control over the resulting porosity, average pore diameter, and mechanical properties. Five different biodegradable biocompatible polyphosphazenes exhibiting glass transition temperatures from -8 to 41 degrees C and poly (lactide-co-glycolide), (PLAGA) a degradable polymer used in a number of biomedical settings, were examined to study the versatility of the process and benchmark the process to heat sintering. Parameters such as: solvent/non-solvent sintering solution composition and submersion time effect the sintering process. PLAGA microsphere scaffolds fabricated with solvent/non-solvent sintering exhibited an interconnected porosity and pore size of 31.9% and 179.1 mum, respectively which was analogous to that of conventional heat sintered PLAGA microsphere scaffolds. Biodegradable polyphosphazene microsphere scaffolds exhibited a maximum interconnected porosity of 37.6% and a maximum compressive modulus of 94.3 MPa. Solvent/non-solvent sintering is an effective strategy for sintering polymeric microspheres, with a broad spectrum of glass transition temperatures, under ambient conditions making it an excellent fabrication route for developing tissue engineering scaffolds and drug delivery vehicles.

[1]  J. Vlachopoulos,et al.  An experimental study and model assessment of polymer sintering , 1996 .

[2]  Cato T. Laurencin,et al.  In Vitro and In Vivo Characterization of Biodegradable Poly(organophosphazenes) for Biomedical Applications , 2007 .

[3]  M. Birch,et al.  Microcellular polyHIPE polymer supports osteoblast growth and bone formation in vitro. , 2004, Biomaterials.

[4]  Cato T Laurencin,et al.  Novel polymer-synthesized ceramic composite-based system for bone repair: an in vitro evaluation. , 2004, Journal of biomedical materials research. Part A.

[5]  J. S. Vrentas,et al.  Solvent self-diffusion in rubbery polymer-solvent systems , 1994 .

[6]  Cato T Laurencin,et al.  Bioreactor-based bone tissue engineering: the influence of dynamic flow on osteoblast phenotypic expression and matrix mineralization. , 2004, Proceedings of the National Academy of Sciences of the United States of America.

[7]  C. Laurencin,et al.  Structural and human cellular assessment of a novel microsphere-based tissue engineered scaffold for bone repair. , 2003, Biomaterials.

[8]  H. Allcock.  Chemistry and applications of polyphosphazenes , 2002 .

[9]  Cato T Laurencin,et al.  Tissue engineered microsphere-based matrices for bone repair: design and evaluation. , 2002, Biomaterials.

[10]  Harry R. Allcock,et al.  Poly[(amino acid ester)phosphazenes]: Synthesis, Crystallinity, and Hydrolytic Sensitivity in Solution and the Solid State , 1994 .

[11]  Sriramakamal Jonnalagadda,et al.  Predictors of glass transition in the biodegradable poly‐lactide and poly‐lactide‐co‐glycolide polymers , 2006 .

[12]  K. Sutherland,et al.  The cleaning of paintings: effects of organic solvents on oil paint films , 2001 .

[13]  Jae-Hyung Jang,et al.  Controllable delivery of non-viral DNA from porous scaffolds. , 2003, Journal of controlled release : official journal of the Controlled Release Society.

[14]  G. Muschler,et al.  Bone cells and matrices in orthopedic tissue engineering. , 2000, The Orthopedic clinics of North America.

[15]  H R Allcock,et al.  A highly porous 3-dimensional polyphosphazene polymer matrix for skeletal tissue regeneration. , 1996, Journal of biomedical materials research.

[16]  Cato T Laurencin,et al.  Effect of side group chemistry on the properties of biodegradable L-alanine cosubstituted polyphosphazenes. , 2006, Biomacromolecules.

[17]  Cato T Laurencin,et al.  Polymeric nanofibers as novel carriers for the delivery of therapeutic molecules. , 2006, Journal of nanoscience and nanotechnology.

[18]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[19]  Cato T Laurencin,et al.  The sintered microsphere matrix for bone tissue engineering: in vitro osteoconductivity studies. , 2002, Journal of biomedical materials research.

[20]  C T Laurencin,et al.  Tissue-engineered bone formation in vivo using a novel sintered polymeric microsphere matrix. , 2004, The Journal of bone and joint surgery. British volume.

[21]  A. Boccaccini,et al.  Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.