Fabrication of high-power piezoelectric transformers using lead-free ceramics for application in electronic ballasts

CuO is doped into (Na0.5K0.5)NbO3 (NKN) ceramics to improve the piezoelectric properties and thus obtain a piezoelectric transformer (PT) with high output power. In X-ray diffraction patterns, the diffraction angles of the CuO-doped NKN ceramics shift to lower values because of an expansion of the lattice volume, thus inducing oxygen vacancies and enhancing the mechanical quality factor. A homogeneous microstructure is obtained when NKN is subjected to CuO doping, leading to improved electrical properties. PTs with different electrode areas are fabricated using the CuO-doped NKN ceramics. Considering the efficiency, voltage gain, and temperature rise of PTs at a load resistance of 1 kΩ, PTs with an electrode with an inner diameter of 15 mm are combined with the circuit design for driving a 13-W T5 fluorescent lamp. A temperature rise of 6°C and a total efficiency of 82.4% (PT and circuit) are obtained using the present PTs.

[1]  Song-Ling Yang,et al.  Effects of modified-process on the microstructure, internal bias field, and activation energy in CuO-doped NKN ceramics , 2012 .

[2]  G. Ivensky,et al.  Generic operational characteristics of piezoelectric transformers , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[3]  F. C. Lee,et al.  Inductor-less piezoelectric transformer electronic ballast for linear fluorescent lamp , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[4]  S. Wada,et al.  Enhancement of Qm by co-doping of Li and Cu to potassium sodium niobate lead-free ceramics , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  D. Vasic,et al.  A new MOSFET & IGBT gate drive insulated by a piezoelectric transformer , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[6]  Seyit O. Ural,et al.  High Power (Na0.5K0.5)NbO3-Based Lead-Free Piezoelectric Transformer , 2011 .

[7]  Hyoun‐Ee Kim,et al.  Low-temperature sintering of MnO2-doped PZT–PZN Piezoelectric ceramics , 2007 .

[8]  Kwok-ho Lam,et al.  Lead-free piezoelectric ceramic (K0.5Na0.5)NbO3 with MnO2 and K5.4Cu1.3Ta10O29 doping for piezoelectric transformer application , 2008 .

[9]  Masatosi Imori,et al.  Performance of a photomultiplier high voltage power supply incorporating a piezoelectric ceramic transformer , 1996, 1998 IEEE Nuclear Science Symposium Conference Record. 1998 IEEE Nuclear Science Symposium and Medical Imaging Conference (Cat. No.98CH36255).

[10]  Shine-Tzong Ho,et al.  Modeling of a Disk-Type Piezoelectric Transformer , 2007, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  Yongwoo Lee,et al.  Electrical Characteristics of the Contour-Vibration-Mode Piezoelectric Transformer with Ring/Dot Electrode Area Ratio , 2000 .

[12]  F. Gao,et al.  Effect of MnO2 Addition on the Structure and Electrical Properties of Pb(Zn1/3Nb2/3)0.20(Zr0.50Ti0.50)0.80O3 Ceramics , 2004 .

[13]  K. Kikuta,et al.  Processing and Piezoelectric Properties of Lead‐Free (K,Na) (Nb,Ta) O3 Ceramics , 2005 .

[14]  Toshimasa Suzuki,et al.  Effects of Manganese Addition on Piezoelectric Properties of Pb(Zr0.5Ti0.5)O3 , 1992 .

[15]  Masato Matsubara,et al.  Piezoelectric properties of (K0.5Na0.5)(Nb1−xTax)O3−K5.4CuTa10O29 ceramics , 2005 .

[16]  Jorge L. Duarte,et al.  Powering neon lamps through piezoelectric transformers , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[17]  Cheng-Che Tsai,et al.  Investigation of CuO-Doped NKN Ceramics with High Mechanical Quality Factor Synthesized by a B-Site Oxide Precursor Method , 2011 .

[18]  Y. Fuda,et al.  Piezoelectric Transformer for Cold Cathode Fluorescent Lamp Inverter , 1997 .

[19]  Shine-Tzong Ho,et al.  Modeling of Disk-type Piezoelectric Transformer , 2007, 2007 2nd IEEE Conference on Industrial Electronics and Applications.

[20]  Kenji Uchino,et al.  Unipoled Disk-type Piezoelectric Transformers , 2002 .

[21]  H. Kakehashi,et al.  Electronic ballast using piezoelectric transformers for fluorescent lamps , 1998, PESC 98 Record. 29th Annual IEEE Power Electronics Specialists Conference (Cat. No.98CH36196).

[22]  Cheng-Che Tsai,et al.  Effects of improved process for CuO-Doped NKN lead-free ceramics on high-power piezoelectric transformers , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[23]  J.A. Cobos,et al.  Miniaturised battery charger using piezoelectric transformers , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[24]  K. Yoon,et al.  Electrical characteristics of high power piezoelectric transformer for 28 W fluorescent lamp , 2001 .

[25]  Tamotsu Ninomiya,et al.  New piezoelectric transformer converter for AC-adapter , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.