Robust stability analysis of structures with uncertain parameters using mathematical programming approach

SUMMARY This paper presents a novel mathematical programming approach for the static stability analysis of structures with uncertainties within the framework of FEM. The considered uncertain parameters are material properties, geometry of element cross section, and loading conditions, all of which are described by an interval model. The proposed method formulates the two cases of interest, namely, worst and best buckling load calculation, into a pair of mathematical programming problems. Two straightforward advantages are exhibited by such formulations. The first advantage is that the proposed formulation can overcome the interference on the sharpness of bounds of the buckling load due to the interval dependence issue. The second benefit is that the information of uncertain parameters causing the extremities of buckling load can always be retrieved as by-products of the uncertain stability analysis. Some numerical examples are presented to illustrate the capability of the proposed method on various structures and the sharpness of the bounds of the buckling load factors. The efficiency and effectiveness of the proposed method are also demonstrated through comparison with the classical Monte Carlo simulation method. Copyright © 2014 John Wiley & Sons, Ltd.

[1]  Ken J. Craig,et al.  On the investigation of shell buckling due to random geometrical imperfections implemented using Karhunen–Loève expansions , 2008 .

[2]  G. Maier.  A matrix structural theory of piecewise linear elastoplasticity with interacting yield planes , 1970 .

[3]  Francis Tin-Loi,et al.  A constrained non‐linear system approach for the solution of an extended limit analysis problem , 2010 .

[4]  D. O’Leary,et al.  Efficient iterative algorithms for the stochastic finite element method with application to acoustic scattering , 2005 .

[5]  S. Mcwilliam.  Anti-optimisation of uncertain structures using interval analysis , 2001 .

[6]  Izuru Takewaki,et al.  Worst case plastic limit analysis of trusses under uncertain loads via mixed 0-1 programming , 2007 .

[7]  Zhiping Qiu.  Convex models and interval analysis method to predict the effect of uncertain-but-bounded parameters on the buckling of composite structures , 2005 .

[8]  Chris P. Pantelides.  Buckling of Elastic Columns Using Convex Model of Uncertain Springs , 1995 .

[9]  Haitao Ma,et al.  A new approach to stability analysis of frame structures using Trefftz-type elements , 2013 .

[10]  Robert L. Mullen,et al.  Combined Axial and Bending Stiffness in Interval Finite-Element Methods , 2007 .

[11]  Lori Graham,et al.  Stochastic Finite-Element Analysis for Elastic Buckling of Stiffened Panels , 2001 .

[12]  Bruce R. Ellingwood,et al.  Effects of Uncertain Material Properties on Structural Stability , 1995 .

[13]  Liping Chen,et al.  Interval uncertain method for multibody mechanical systems using Chebyshev inclusion functions , 2013 .

[14]  Jie Li,et al.  Response analysis of stochastic parameter structures under non-stationary random excitation , 2001 .

[15]  Isaac Elishakoff,et al.  Probabilistic resolution of the twentieth century conundrum in elastic stability , 2012 .

[16]  William E. Boyce.  Buckling of a Column with Random Initial Displacements , 1961 .

[17]  Makoto Ohsaki,et al.  Optimization-based stability analysis of structures under unilateral constraints , 2009 .

[18]  Umberto Alibrandi,et al.  Probabilistic eigenvalue buckling analysis solved through the ratio of polynomial response surface , 2010 .

[19]  Marco Lombardi,et al.  OPTIMIZATION OF UNCERTAIN STRUCTURES USING NON-PROBABILISTIC MODELS , 1998 .

[20]  Singiresu S. Rao,et al.  Analysis of uncertain structural systems using interval analysis , 1997 .

[21]  Xu Han,et al.  Transient waves in composite‐laminated plates with uncertain load and material property , 2008 .

[22]  F. Tin-Loi,et al.  Nonlinear analysis of semirigid frames: A parametric complementarity approach , 1996 .

[23]  Alfredo R. de Faria,et al.  Buckling optimization and antioptimization of composite plates: uncertain loading combinations , 2002 .

[24]  Johann Arbocz,et al.  First-order second-moment analysis of the buckling of shells with Random imperfections , 1987 .

[25]  F. Tin-Loi,et al.  Hybrid probabilistic interval analysis of bar structures with uncertainty using a mixed perturbation Monte-Carlo method , 2011 .

[26]  David Moens,et al.  Probabilistic and Interval Analyses Contrasted in Impact Buckling of a Clamped Column , 2013 .

[27]  Manolis Papadrakakis,et al.  Buckling analysis of I-section portal frames with stochastic imperfections , 2013 .

[28]  W. Gao.  Interval Finite Element Analysis using Interval Factor Method , 2007 .

[29]  I. Elishakoff,et al.  Modified Monte Carlo method for buckling analysis of nonlinear imperfect structures , 2013 .

[30]  Z. Kang,et al.  Non-probabilistic reliability-based topology optimization of geometrically nonlinear structures using convex models , 2009 .

[31]  Xiao Wei Yang,et al.  Interval eigenvalue analysis for structures with interval parameters , 2003 .

[32]  W. B. Fraser,et al.  The Buckling of a Column With Random Initial Deflections , 1969 .

[33]  Peter Wriggers,et al.  Random homogenization analysis in linear elasticity based on analytical bounds and estimates , 2011 .

[34]  W. Gao,et al.  Natural frequency and mode shape analysis of structures with uncertainty , 2007 .

[35]  Vissarion Papadopoulos,et al.  Stochastic stability analysis of steel tubes with random initial imperfections , 2013 .

[36]  H. Lindberg.  Dynamic Response and Buckling Failure Measures for Structures With Bounded and Random Imperfections , 1991 .

[37]  Tai-Yan Kam,et al.  Buckling analysis of imperfect frames using a stochastic finite element method , 1992 .