Interfaces in lead-free soldering
暂无分享,去创建一个
[1] K. Suganuma,et al. Interface microstructure between Fe-42Ni alloy and pure Sn , 2003 .
[2] K. Suganuma,et al. Interfacial microstructure between Sn-3Ag-xBi alloy and Cu substrate with or without electrolytic Ni plating , 2003 .
[3] K. S. Kim,et al. Effects of cooling speed on microstructure and tensile properties of Sn–Ag–Cu alloys , 2002 .
[4] Zhengkui Xu,et al. Thermal stability of electroless-nickel/solder interface: Part A. interfacial chemistry and microstructure , 2000 .
[5] M. Hon,et al. The adhesion strength of A lead-free solder hot-dipped on copper substrate , 2000 .
[6] Won Kyoung Choi,et al. Effect of Ni layer thickness and soldering time on intermetallic compound formation at the interface between molten Sn-3.5Ag and Ni/Cu substrate , 1999 .
[7] Y. M. Chen,et al. Reaction kinetics of solder-balls with pads in BGA packages during reflow soldering , 1999 .
[8] G. Ghosh. Kinetics of interfacial reaction between eutectic Sn-Pb solder and Cu/Ni/Pd metallizations , 1999 .
[9] D. R. Frear,et al. Solder reaction-assisted crystallization of electroless Ni-P under bump metallization in low cost flip chip technology , 1999 .
[10] M. Otsuka,et al. Effect of thermal cycles on the mechanical strength of quad flat pack leads/Sn-3.5Ag-X (X=Bi and Cu) solder joints , 1999 .
[11] Hyuck-Mo Lee,et al. Thermodynamic prediction of interface phases at Cu/solder joints , 1998 .
[12] Koichi Niihara,et al. Wetting and interface microstructure between Sn–Zn binary alloys and Cu , 1998 .
[13] Seung Wook Yoon,et al. Thermodynamics-aided alloy design and evaluation of Pb-free solder, Sn-Bi-In-Zn system , 1997 .
[14] J. W. Morris,et al. The effect of Cu6Sn5 whisker precipitates in bulk 60sn-40pb solder , 1987 .
[15] K. Suganuma. Advances in lead-free electronics soldering , 2001 .
[16] N. Sarafianos. Determining reaction time at iron/tin interface of electrolytic tinplate during first stage of FeSn2 growth , 1987 .
[17] Lawrence H. Bennett,et al. Binary alloy phase diagrams , 1986 .