Reliability assessment of a continuous-state fuel cell stack system with multiple degrading components

Abstract A polymer electrolyte membrane fuel cell (PEMFC) stack is a multi-component system composed of continuously degrading fuel cells. The voltage degradation of the fuel cells causes the degradation of the stack system, which has two system-level degradation measures; the overall stack output voltage and the minimum voltage of individual cells. This paper develops a hierarchical Bayesian modeling and data analysis method to predict the reliability of a PEMFC stack system using the voltage degradation data collected from its fuel cell components. We introduce a two-term exponential model to describe the nonlinear voltage degradation paths of the fuel cell components, then builds a hierarchical Bayesian degradation model to predict the stack system reliability by taking a k-out-of-m:F system into account. Possible alternative modeling approaches are discussed with an in-depth comparison. This paper will contribute to the modeling and data analysis methods for continuous-state systems composed of continuous-state components.

[1]  Bin Liu,et al.  Reliability Modeling and Analysis of Load-Sharing Systems With Continuously Degrading Components , 2018, IEEE Transactions on Reliability.

[2]  V. Muggeo.  Estimating regression models with unknown break‐points , 2003, Statistics in medicine.

[3]  Kai Yang,et al.  Continuous state reliability analysis , 1996, Proceedings of 1996 Annual Reliability and Maintainability Symposium.

[4]  C. Joseph Lu,et al.  Using Degradation Measures to Estimate a Time-to-Failure Distribution , 1993 .

[5]  Suk Joo Bae,et al.  A change-point analysis for modeling incomplete burn-in for light displays , 2006 .

[6]  Firoozeh Haghighi,et al.  Reliability analysis of a k-out-of-n:F system under a linear degradation model with calibrations , 2019 .

[7]  Lirong Cui,et al.  Reliability modeling for degradation-shock dependence systems with multiple species of shocks , 2019, Reliab. Eng. Syst. Saf..

[8]  Andrew Thomas,et al.  The BUGS project: Evolution, critique and future directions , 2009, Statistics in medicine.

[9]  William Q. Meeker,et al.  A COMPARISON OF DEGRADATION AND FAILURE-TIME ANALYSIS METHODS FOR ESTIMATING A TIME-TO-FAILURE DISTRIBUTION , 1996 .

[10]  Min Xie,et al.  Utilizing experimental degradation data for warranty cost optimization under imperfect repair , 2018, Reliab. Eng. Syst. Saf..

[11]  Xiao-Li Meng,et al.  Modeling covariance matrices in terms of standard deviations and correlations, with application to shrinkage , 2000 .

[12]  David B. Dunson,et al.  Bayesian Data Analysis , 2010 .

[13]  Mikhail Nikulin,et al.  Advances in degradation modeling : applications to reliability, survival analysis, and finance , 2010 .

[14]  Yaping Wang,et al.  Modeling the Dependent Competing Risks With Multiple Degradation Processes and Random Shock Using Time-Varying Copulas , 2012, IEEE Transactions on Reliability.

[15]  Bo Sun,et al.  A novel lifetime prediction for integrated LED lamps by electronic-thermal simulation , 2017, Reliab. Eng. Syst. Saf..

[16]  Maurizio Guida,et al.  A random-effects model for long-term degradation analysis of solid oxide fuel cells , 2015, Reliab. Eng. Syst. Saf..

[17]  K. Kapur,et al.  Continuous-state system-reliability: an interpolation approach , 1998 .

[18]  David W. Coit,et al.  Component Reliability Criticality or Importance Measures for Systems With Degrading Components , 2012, IEEE Transactions on Reliability.

[19]  Nan Chen,et al.  Optimal Inspection and Replacement Policies for Multi-Unit Systems Subject to Degradation , 2018, IEEE Transactions on Reliability.

[20]  Suk Joo Bae,et al.  A prediction model of degradation rate for membrane electrode assemblies in direct methanol fuel cells , 2009 .

[21]  Adrian F. M. Smith,et al.  Hierarchical Bayesian Analysis of Changepoint Problems , 1992 .

[22]  A. Leo Beem,et al.  A program for fitting two-phase segmented-curve models with an unknown change point, with an application to the analysis of strategy shifts in a cognitive task , 1995 .

[23]  Noureddine Zerhouni,et al.  Degradations analysis and aging modeling for health assessment and prognostics of PEMFC , 2016, Reliab. Eng. Syst. Saf..

[24]  Tao Yuan,et al.  A Bayesian approach to modeling two-phase degradation using change-point regression , 2015, Reliab. Eng. Syst. Saf..

[25]  Tao Yuan,et al.  Bayesian degradation modeling for reliability prediction of organic light-emitting diodes , 2016, J. Comput. Sci..

[26]  María Luz Gámiz,et al.  Regression analysis of the structure function for reliability evaluation of continuous-state system , 2010, Reliab. Eng. Syst. Saf..

[27]  Michael Osterman,et al.  Prognostics of lithium-ion batteries based on DempsterShafer theory and the Bayesian Monte Carlo me , 2011 .

[28]  Hyeonseok Lee,et al.  A field-applicable health monitoring method for photovoltaic system , 2019, Reliab. Eng. Syst. Saf..

[29]  R. Yam,et al.  Approaches for reliability modeling of continuous-state devices , 1999 .

[30]  Suk Joo Bae,et al.  Degradation pattern prediction of a polymer electrolyte membrane fuel cell stack with series reliability structure via durability data of single cells , 2014 .