The Extended Elastoplastic Constitutive Equation with Tangential Stress Rate Effect

Abstract In traditional elastoplastic constitutive equation with a single smooth plastic potential surface, the plastic stretching is independent of the tangential stress rate , i.e. the component of stress rate which is tangential to the yield surface. This traditional model predicts an unrealistically stiff response when a loading path deviates significantly from the proportional loading. In order to overcome this defect various constitutive models have been proposed. However, a pertinent model applicable to the description of the deformation behavior in a general loading process has not been proposed up to the present. In this article, an elastoplastic constitutive equation with the inelastic stretching induced by the deviatoric stress rate component tangential to the subloading surface is formulated by extending the subloading surface model with a smooth elastic–plastic transition. This model is applicable to the analysis of deformation in a general loading process of materials with an arbitrary yield surface. Based on this equation, a constitutive equation of metals with isotropic-kinematic hardening is formulated and its basic characteristics are examined in detail.

[1]  James R. Rice,et al.  Localized necking in thin sheets , 1975 .

[2]  A.J.M. Spencer,et al.  A theory of the kinematics of ideal soils under plane strain conditions , 1964 .

[3]  H. Zbib.  On the mechanics of large inelastic deformations: noncoaxiality, axial effects in torsion and localization , 1991 .

[4]  Inexpedience of the non-associated flow rule , 1991 .

[5]  Koichi Hashiguchi,et al.  A generalized formulation of the concept of nonhardening region , 1995 .

[6]  Koichi Hashiguchi,et al.  Fundamental requirements and formulation of elastoplastic constitutive equations with tangential plasticity , 1993 .

[7]  Y. Yamada,et al.  Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method , 1968 .

[8]  John W. Hutchinson,et al.  A class of phenomenological corner theories of plasticity , 1979 .

[9]  K. Hashiguchi,et al.  Plastic constitutive equations of granular materials , 1978 .

[10]  Zenon Mróz,et al.  On the description of anisotropic workhardening , 1967 .

[11]  P. Vermeer.  Upgrading of Soil Models by Hencky's Theory of Plasticity , 1993 .

[12]  Pere C. Prat,et al.  Microplane Model for Brittle-Plastic Material: I. Theory , 1988 .

[13]  Z. Mróz.  ON HYPOELASTICITY AND PLASTICITY APPROACHES TO CONSTITUTIVE MODELLING OF INELASTIC BEHAVIOUR OF SOILS , 1980 .

[14]  A.J.M. Spencer,et al.  Deformation of Ideal Granular Materials , 1982 .

[15]  S. Cowin,et al.  On the double-sliding free-rotating model for the deformation of granular materials , 1981 .

[16]  I. Vardoulakis,et al.  Noncoaxial Flow Theory of Plasticity: Shear Failure Predictions in Sand , 1993 .

[17]  Koichi Hashiguchi.  Constitutive Equations of Elastoplastic Materials With Elastic-Plastic Transition , 1980 .

[18]  R. Hill,et al.  On constitutive inequalities for simple materials—I , 1968 .

[19]  H. Petryk.  On the second-order work in plasticity , 1991 .

[20]  W. T. Koiter.  Stress-strain relations, uniqueness and variational theorems for elastic-plastic materials with a singular yield surface , 1953 .

[21]  Y. Dafalias.  The Plastic Spin , 1985 .

[22]  Peter Hartley,et al.  Use of a mean-normal technique for efficient and numerically stable large-strain elastic-plastic finite-element solutions , 1986 .

[23]  D. C. Drucker,et al.  Soil mechanics and plastic analysis or limit design , 1952 .

[24]  A. A. Il'iushin.  ON THE POSTULATE OF PLASTICITY , 1961 .

[25]  Koichi Hashiguchi,et al.  Elastoplastic constitutive equation of soils with the subloading surface and the rotational hardening , 1998 .

[26]  R. Hill.  Generalized constitutive relations for incremental deformation of metal crystals by multislip , 1966 .

[27]  G. Mandl,et al.  Fully Developed Plastic Shear Flow of Granular Materials , 1970 .

[28]  J. Rice,et al.  CONDITIONS FOR THE LOCALIZATION OF DEFORMATION IN PRESSURE-SENSITIVE DILATANT MATERIALS , 1975 .

[29]  Par J. Mandel.  Sur les equations d'ecoulement des sols ideaux en deformation plane et le concept du double glissement , 1966 .

[30]  Koichi Hashiguchi.  The extended flow rule in plasticity , 1997 .

[31]  Koichi Hashiguchi,et al.  Constitutive Equations of Elastoplastic Materials With Anisotropic Hardening and Elastic-Plastic Transition , 1981 .

[32]  S. Hecker.  Experimental investigation of corners in the yield surface , 1972 .

[33]  R. D. Krieg.  A Practical Two Surface Plasticity Theory , 1975 .

[34]  K. Hashiguchi.  A mathematical modification of two surface model formulation in plasticity , 1988 .

[35]  M. J. Sewell.  A plastic flow rule at a yield vertex , 1974 .

[36]  R. Hill.  A general theory of uniqueness and stability in elastic-plastic solids , 1958 .

[37]  G. Mullenger,et al.  A rate-type constitutive model for soil with a critical state , 1978 .

[38]  Atsushi Yashima,et al.  GENERAL THEORY OF SHEAR BANDS FORMATION BY A NON-COAXIAL CAM-CLAY MODEL , 1989 .

[39]  O. C. Zienkiewicz,et al.  An anisotropic, critical state model for soils subject to cyclic loading , 1981 .

[40]  Deformation behaviour of elastic-plastic tubes under external pressure and axial load , 1986 .

[41]  Hussein M. Zbib,et al.  On the concept of relative and plastic spins and its implications to large deformation theories. Part I: Hypoelasticity and vertex-type plasticity , 1988 .

[42]  Rodney Hill,et al.  Some basic principles in the mechanics of solids without a natural time , 1959 .

[43]  Kenneth Runesson,et al.  A note on nonassociated plastic flow rules , 1989 .

[44]  Lallit Anand,et al.  Plane deformations of ideal granular materials , 1983 .

[45]  K. Ikegami.  Experimental Plasticity on the Anisotropy of Metals , 1982 .

[46]  Zhi-Liang Wang,et al.  Bounding Surface Hypoplasticity Model for Sand , 1990 .

[47]  Koichi Hashiguchi,et al.  On the loading criterion , 1994 .

[48]  S. Nemat-Nasser,et al.  A plasticity model for flow of granular materials under triaxial stress states , 1982 .

[49]  G. N. Pande,et al.  Multi‐laminate model of clays—a numerical evaluation of the influence of rotation of the principal stress axes , 1983 .

[50]  R. Rivlin,et al.  Stress-Deformation Relations for Isotropic Materials , 1955 .

[51]  H. Hencky,et al.  Zur Theorie plastischer Deformationen und der hierdurch im Material hervorgerufenen Nachspannungen , 1924 .

[52]  R. D. Krieg,et al.  Accuracies of Numerical Solution Methods for the Elastic-Perfectly Plastic Model , 1977 .

[53]  L. Anand,et al.  Initiation of localized shear bands in plane strain , 1980 .

[54]  Bernard Budiansky,et al.  A Mathematical Theory of Plasticity Based on the Concept of Slip , 1949 .

[55]  Rodney Hill,et al.  The essential structure of constitutive laws for metal composites and polycrystals , 1967 .

[56]  Wilfred D. Iwan,et al.  On a Class of Models for the Yielding Behavior of Continuous and Composite Systems , 1967 .

[57]  Anisotropy due to plastic deformation of initially isotropic mild steel and its analytical formulation , 1975 .

[58]  S. Nemat-Nasser.  On Finite Plastic Flow of Crystalline Solids and Geomaterials , 1983 .

[59]  K. Hashiguchi,et al.  Subloading surface model in unconventional plasticity , 1989 .

[60]  Manabu Gotoh.  A class of plastic constitutive equations with vertex effect. I: General theory , 1985 .

[61]  Koichi Hashiguchi,et al.  Mechanical requirements and structures of cyclic plasticity models , 1993 .

[62]  Stephen C. Cowin,et al.  Initial planar deformation of dilatant granular materials , 1978 .

[63]  K. Hashiguchi.  Subloading Surface Model with Tangential Plasticity , 1989 .

[64]  J. Mandel.  Generalisation de la theorie de plasticite de W. T. Koiter , 1965 .

[65]  D. R. Bland,et al.  The associated flow rule of plasticity , 1957 .

[66]  M. J. Sewell.  A yield-surface corner lowers the buckling stress of an elastic-plastic plate under compression , 1973 .