Incorporation of zirconia into coatings formed by DC plasma electrolytic oxidation of aluminium in nanoparticle suspensions

Abstract A study has been carried out to investigate the incorporation of zirconia into alumina-based coatings formed on aluminium using DC plasma electrolytic oxidation in phosphate and silicate electrolytes containing zirconia nanoparticles in suspension. The nanoparticles were incorporated mainly near the coating surface and within cavities inside the coatings. Additionally, a silicon-rich, surface deposit appeared to entrain the nanoparticles of the silicate electrolyte. Zirconia was also present in cellular microstructures of the main alumina-rich coating layers, suggesting melting at >1710 °C and subsequent solidification. The coatings frequently contained tetragonal zirconia in addition to monoclinic zirconia, with the presence of zirconia also affecting the proportions of γ- and α-alumina in favour of the former phase.

[1]  P. Bouvier,et al.  Crystallite size effect on the tetragonal-monoclinic transition of undoped nanocrystalline zirconia studied by XRD and Raman spectrometry , 2000 .

[2]  A. Gaisin,et al.  A Vapor-Air Discharge with a Porous Electrolytic Cathode at Atmospheric Pressure , 2005 .

[3]  K.H.J. Buschow,et al.  Encyclopedia of Materials: Science and Technology , 2004 .

[4]  E. D. Whitney,et al.  Effect of Pressure on Monoclinic‐Tetragonal Transition of Zirconia; Thermodynamics , 1962 .

[5]  R. S. Alwitt.  Thickness‐Dependent Properties of Amorphous Anodic Alumina Films , 1987 .

[6]  G. Thompson,et al.  The generation of flaws in anodic barrier-type films on aluminium , 1982 .

[7]  H. J. D. Wit,et al.  The Anodization of Heated Aluminum , 1987 .

[8]  O. Khaselev,et al.  Structure and composition of anodic films formed on binary Mg–Al alloys in KOH–aluminate solutions under continuous sparking , 2001 .

[9]  M. Yoshimura,et al.  Stabilization of zirconia lamellae in rapidly solidified alumina-zirconia eutectic composites , 2005 .

[10]  Lucien Diego Laude,et al.  Surface properties of excimer-laser-irradiated sintered alumina , 1995 .

[11]  J. Moreno.  Stabilization of Undoped Tetragonal Zirconia in Alumina-Zirconia Composites Using Rapid Eutectic Solidification , 2004 .

[12]  A. Matthews,et al.  Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis , 2002 .

[13]  A. Matthews,et al.  Discharge characterization in plasma electrolytic oxidation of aluminium , 2003 .

[14]  J. Albella,et al.  A theory of avalanche breakdown during anodic oxidation , 1987 .

[15]  M. Klapkiv,et al.  Production of conversion oxide-ceramic coatings on zirconium and titanium alloys , 2006 .

[16]  M. Graham,et al.  Thermal oxidation of single-crystal aluminum at 550°C , 1988 .

[17]  Tsuneo Suzuki,et al.  Increase in Phase Transition Temperature of Activated Alumina with Nano‐Zirconia Synthesized by Pulsed Wire Discharge , 2003 .

[18]  A. M. Segadães,et al.  Revised phase equilibrium relationships in the system Al2O3ZrO2SiO2 , 1992 .

[19]  Kh K Tazmeev,et al.  Some Specific Features of Heat and Mass Transfer of Gas-Discharge Plasma with a Liquid Electrolytic Cathode , 2005 .

[20]  E. Jordan,et al.  Deposition of thermal barrier coatings using the solution precursor plasma spray process , 2004 .

[21]  O. Polyakov,et al.  The role of electrolyte concentration in the decomposition of water and generation of electrons under conditions of anodic microdischarges , 2005 .

[22]  S. Pickering,et al.  Thermal stability of transition phases in zirconia-doped alumina , 1997 .

[23]  F. Mücklich,et al.  Validation of crystallographic correlation for faceted morphology in laser surface engineered alumina ceramic , 2007 .

[24]  R. Davis,et al.  Direct Observation of the Oxidation of Aluminum Single‐Crystal Surfaces , 1963 .

[25]  A. Girginov,et al.  Electrical breaking down of barrier anodic films during their formation , 1979 .

[26]  A. Matthews,et al.  Plasma electrolysis for surface engineering , 1999 .

[27]  G. Thompson,et al.  Influence of grain orientation on oxygen generation in anodic titania , 2008 .

[28]  G. Thompson,et al.  The electrical breakdown during anodizing of high purity aluminium in borate solutions , 1982 .

[29]  W. Bernard,et al.  Anodic Oxide Growth on Aluminum in the Presence of a Thin Thermal Oxide Layer , 1985 .

[30]  N. Klein,et al.  Electrical breakdown mechanisms in thin insulators , 1978 .

[31]  S. Qadri,et al.  Stabilization of tetragonal ZrO2 with Al2O3 in reactive magnetron sputtered thin films , 1987 .

[32]  A. Matthews,et al.  Thickness effects on the mechanical properties of micro-arc discharge oxide coatings on aluminium alloys , 1999 .

[33]  H. Schaper,et al.  A quantitative investigation of the phase transformation of gamma to alpha alumina with high temperature DTA , 1984 .

[34]  H. G. Schneider,et al.  Process characteristics and parameters of Anodic Oxidation by spark discharge (ANOF) , 1984 .

[35]  K. Shimizu,et al.  A Tracer Study of Oxide Growth during Spark Anodizing of Aluminum , 2005 .

[36]  N. Klein,et al.  Electroluminescence during the Anodic Growth of Tantalum Pentoxide , 1981 .

[37]  W. Nellis,et al.  Development of novel microstructures in zirconia-toughened alumina using rapid solidification and shock compaction , 1996 .

[38]  G. Thompson,et al.  Incorporation of zirconia nanoparticles into coatings formed on aluminium by AC plasma electrolytic oxidation , 2008 .

[39]  L. Zhengyi,et al.  Laser remelting of plasma sprayed Al2O3 ceramic coatings and subsequent wear resistance , 2000 .

[40]  J. Albella,et al.  Pore formation during the breakdown process in anodic Ta2O5 films , 1987 .

[41]  A. Matthews,et al.  Thermal cyclic performance of NiAl/alumina-stabilized zirconia thermal barrier coatings deposited using a hybrid arc and magnetron sputtering system , 2006 .

[42]  S. Ikonopisov,et al.  Theory of electrical breakdown during formation of barrier anodic films , 1977 .

[43]  J. Siejka,et al.  Ion Transport Through Duplex Amorphous/Crystalline Barrier Aluminum Oxide Films , 1988 .

[44]  A. Yerokhin,et al.  Phase formation in ceramic coatings during plasma electrolytic oxidation of aluminium alloys , 1998 .

[45]  N. Klein,et al.  Electrical Breakdown I . During the Anodic Growth of Tantalum Pentoxide , 1980 .