Novel printed body worn sensor for measuring the human movement orientation

Purpose The purpose of this study is the measuring of the human movement using printed wearable sensor. Human movement measurement is one of the usages for wearable sensors. This technology assists the researchers to collect data from the daily activities of individuals. In other words, the kinematics data of human motion will be extracted from this data and implemented in biomechanical aspects. Design/methodology/approach This study presents an innovative printed wearable sensor which can be used for measuring human movement orientations. In this paper, the manufacturing process, implementation, measurement setup and calibration procedure of this new sensor will be explained, and the results of calibration methods will be presented. The conductive flexible nylon/lycra fabric strain gauge was developed using polypyrrole (PPy)–1, 5-naphthalenedisulfonic acid by using a sophisticated method composed of screen printing followed by chemical vapor deposition at room temperature. Findings The morphological characterization using scanning electron microscopy shows the PPy-coated fabric exhibiting a homogenous and smooth surface. Based on the results, the linearity and hysteresis error are 98 and 8 per cent, respectively. Finally, the behavior of our sensor is evaluated in some cases, and the effects of relaxation and strain rate will be discussed. Practical implications The wearable sensor is one of the most advanced technologies in biomedical engineering. It can be used in several applications for prohibition, diagnosing and treatment of diseases. Originality/value The paper present original data acquired from a technical set-up in biomechanic labs. An innovative method was used for collecting the resistance changing of the sensor. A measurement setup was prepared as a transducer to convert the resistance into voltage.

[1]  Edward G Mohr.  Proper body mechanics from an engineering perspective. , 2010, Journal of bodywork and movement therapies.

[2]  G. Tröster,et al.  Sensor for Measuring Strain in Textile , 2008, Sensors.

[3]  G. ÓLaighin,et al.  Direct measurement of human movement by accelerometry. , 2008, Medical engineering & physics.

[4]  Cédric Cochrane,et al.  Design and Development of a Flexible Strain Sensor for Textile Structures Based on a Conductive Polymer Composite , 2007, Sensors (Basel, Switzerland).

[5]  Bing Yu,et al.  Injury rate, mechanism, and risk factors of hamstring strain injuries in sports: A review of the literature , 2012 .

[6]  Jochen Teizer,et al.  Real-time construction worker posture analysis for ergonomics training , 2012, Adv. Eng. Informatics.

[7]  J. Joo,et al.  CHARACTERISTICS OF ELECTRICALLY CONDUCTING POLYMER-COATED TEXTILES , 2003 .

[8]  A. Cuccia,et al.  The measurement of craniocervical posture: a simple method to evaluate head position. , 2009, International journal of pediatric otorhinolaryngology.

[9]  Lucy E. Dunne,et al.  Initial development and testing of a novel foam-based pressure sensor for wearable sensing , 2005, Journal of NeuroEngineering and Rehabilitation.

[10]  Shu Morioka,et al.  Influence of perceptual learning on standing posture balance: repeated training for hardness discrimination of foot sole. , 2004, Gait & posture.

[11]  C. Fernandez-Valdivielso,et al.  Simultaneous measurement of strain and temperature using a fiber Bragg grating and a thermochromic material , 2002, 2002 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002(Cat. No.02EX533).

[12]  Xiaoming Tao,et al.  Smart fibres, fabrics and clothing , 2001 .

[13]  Gerhard Tröster,et al.  SMASH: a distributed sensing and processing garment for the classification of upper body postures , 2008, BODYNETS.

[14]  P. Buckle,et al.  Current techniques for assessing physical exposure to work-related musculoskeletal risks, with emphasis on posture-based methods. , 1999, Ergonomics.

[15]  Kyung Wha Oh,et al.  Stretchable conductive fabric for electrotherapy , 2003 .

[16]  Corinne Mattmann.  Body posture detection using strain sensitive clothing , 2008 .

[17]  Raymond Oliver,et al.  A Design-Led, Materials Based Approach to Human Centered Applications Using Modified Dielectric Electroactive Polymer Sensors , 2014, S-CUBE.

[18]  Daniel Thalmann,et al.  Visualization of Local Movements for Optimal Marker Positioning , 2000, AMDO.

[19]  Miguel A. L. Nicolelis,et al.  Three-dimensional, automated, real-time video system for tracking limb motion in brain–machine interface studies , 2009, Journal of Neuroscience Methods.

[20]  Bin Yang,et al.  Strain sensing behavior of textile structures made of stainless steel continuous filament yarns under uni-axial tensile loading , 2007, International Conference on Smart Materials and Nanotechnology in Engineering.

[21]  Enzo Pasquale Scilingo,et al.  Strain-sensing fabrics for wearable kinaesthetic-like systems , 2003 .

[22]  Yang Li,et al.  A flexible strain sensor from polypyrrole-coated fabrics , 2005 .

[23]  Frank Clemens,et al.  Comparison of Piezoresistive Monofilament Polymer Sensors , 2014, Sensors.

[24]  P. Veltink,et al.  Compensation of magnetic disturbances improves inertial and magnetic sensing of human body segment orientation , 2005, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[25]  Alessandro Chiolerio,et al.  Wearable Electronics and Smart Textiles: A Critical Review , 2014, Sensors.

[26]  B. Moshiri,et al.  Sharif-human movement instrumentation system (SHARIF-HMIS) for daily activities , 2012, 2012 19th Iranian Conference of Biomedical Engineering (ICBME).

[27]  D. Rossi,et al.  Dressware: wearable hardware , 1999 .

[28]  D. Roetenberg,et al.  Xsens MVN: Full 6DOF Human Motion Tracking Using Miniature Inertial Sensors , 2009 .

[29]  R. Narimani,et al.  A wearable respiratory plethysmography using flexible sensor , 2013 .

[30]  A Plamondon,et al.  Evaluation of a hybrid system for three-dimensional measurement of trunk posture in motion. , 2007, Applied ergonomics.