A miniature microbial fuel cell with conducting nanofibers-based 3D porous biofilm

Miniature microbial fuel cell (MFC) technology has received growing interest due to its potential applications in high-throughput screening of bacteria and mutants to elucidate mechanisms of electricity generation. This paper reports a novel miniature MFC with an improved output power density and short startup time, utilizing electrospun conducting poly(3,4-ethylenedioxythiophene) (PEDOT) nanofibers as a 3D porous anode within a 12 μl anolyte chamber. This device results in 423 μW cm−3 power density based on the volume of the anolyte chamber, using Shewanella oneidensis MR-1 as a model biocatalyst without any optimization of bacterial culture. The device also excels in a startup time of only 1hr. The high conductivity of the electrospun nanofibers makes them suitable for efficient electron transfer. The mean pore size of the conducting nanofibers is several micrometers, which is favorable for bacterial penetration and colonization of surfaces of the nanofibers. We demonstrate that S. oneidensis can fully colonize the interior region of this nanofibers-based porous anode. This work represents a new attempt to explore the use of electrospun PEDOT nanofibers as a 3D anode material for MFCs. The presented miniature MFC potentially will provide a high-sensitivity, high-throughput tool to screen suitable bacterial species and mutant strains for use in large-size MFCs.

[1]  Peng Chen,et al.  Macroporous and monolithic anode based on polyaniline hybridized three-dimensional graphene for high-performance microbial fuel cells. , 2012, ACS nano.

[2]  Georg S. Duesberg,et al.  Transparent carbon nanotube coatings , 2005 .

[3]  Shengchang Su,et al.  A microliter-scale microbial fuel cell array for bacterial electrogenic screening , 2013 .

[4]  R. Ruoff,et al.  Graphene and Graphene Oxide: Synthesis, Properties, and Applications , 2010, Advanced materials.

[5]  Guangming Chen,et al.  Convenient construction of poly(3,4-ethylenedioxythiophene)–graphene pie-like structure with enhanced thermoelectric performance , 2013 .

[6]  Hubertus V. M. Hamelers,et al.  Performance of non-porous graphite and titanium-based anodes in microbial fuel cells , 2008 .

[7]  C. Avignone-Rossa,et al.  Activated carbon cloth as anode for sulfate removal in a microbial fuel cell. , 2008, Environmental science & technology.

[8]  Seokheun Choi,et al.  An array of microliter-sized microbial fuel cells generating 100 μW of power , 2012 .

[9]  Choongho Yu,et al.  Improved thermoelectric behavior of nanotube-filled polymer composites with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate). , 2010, ACS nano.

[10]  Liangbing Hu,et al.  Electronic properties of carbon nanotube/fabric composites , 2007 .

[11]  Qingliang Zhao,et al.  Accelerated start-up of two-chambered microbial fuel cells: Effect of anodic positive poised potential , 2009 .

[12]  Younan Xia,et al.  Electrospinning of Nanofibers: Reinventing the Wheel? , 2004 .

[13]  S. Stankovich,et al.  Graphene-silica composite thin films as transparent conductors. , 2007, Nano letters.

[14]  Junseok Chae,et al.  Improved current and power density with a micro-scale microbial fuel cell due to a small characteristic length. , 2014, Biosensors & bioelectronics.

[15]  Jae Ik Lee,et al.  A high power density miniaturized microbial fuel cell having carbon nanotube anodes , 2015 .

[16]  Willy Verstraete,et al.  Tubular microbial fuel cells for efficient electricity generation. , 2005, Environmental science & technology.

[17]  Seong Ihl Woo,et al.  Thermoelectric properties of nanocomposite thin films prepared with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) and graphene. , 2012, Physical chemistry chemical physics : PCCP.

[18]  Jun‐Jie Zhu,et al.  A Graphene/Poly(3,4-ethylenedioxythiophene) Hybrid as an Anode for High-Performance Microbial Fuel Cells. , 2013, ChemPlusChem.

[19]  Fang Qian,et al.  High power density microbial fuel cell with flexible 3D graphene-nickel foam as anode. , 2013, Nanoscale.

[20]  C. M. Li,et al.  Nanostructured polyaniline/titanium dioxide composite anode for microbial fuel cells. , 2008, ACS nano.

[21]  Yujie Feng,et al.  Use of carbon mesh anodes and the effect of different pretreatment methods on power production in microbial fuel cells. , 2009, Environmental science & technology.

[22]  Yan Wang,et al.  A hybrid material of graphene and poly (3,4-ethyldioxythiophene) with high conductivity, flexibility, and transparency , 2009 .

[23]  B. Logan,et al.  Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. , 2007, Environmental science & technology.

[24]  Jung-Hyun Kim,et al.  Direct synthesis of highly conductive poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS)/graphene composites and their applications in energy harvesting systems , 2014, Nano Research.

[25]  K. Müllen,et al.  Transparent, conductive graphene electrodes for dye-sensitized solar cells. , 2008, Nano letters.

[26]  Xia Huang,et al.  Separator characteristics for increasing performance of microbial fuel cells. , 2009, Environmental science & technology.

[27]  Muhammad M Hussain,et al.  Vertically grown multiwalled carbon nanotube anode and nickel silicide integrated high performance microsized (1.25 μL) microbial fuel cell. , 2012, Nano letters.

[28]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[29]  P. Liang,et al.  Recent progress in electrodes for microbial fuel cells. , 2011, Bioresource technology.

[30]  Bruce E Logan,et al.  Continuous electricity generation from domestic wastewater and organic substrates in a flat plate microbial fuel cell. , 2004, Environmental science & technology.

[31]  Paul de Figueiredo,et al.  A microfluidic microbial fuel cell array that supports long-term multiplexed analyses of electricigens. , 2012, Lab on a chip.

[32]  Sundara Ramaprabhu,et al.  Development of carbon nanotubes and nanofluids based microbial fuel cell , 2008 .

[33]  Chun Li,et al.  Flexible graphene films via the filtration of water-soluble noncovalent functionalized graphene sheets. , 2008, Journal of the American Chemical Society.

[34]  Alessandro A. Carmona-Martínez,et al.  Electrospun and solution blown three-dimensional carbon fiber nonwovens for application as electrodes in microbial fuel cells , 2011 .

[35]  Zhen He,et al.  Electricity generation from artificial wastewater using an upflow microbial fuel cell. , 2005, Environmental science & technology.

[36]  Claire Dumas,et al.  Marine microbial fuel cell: Use of stainless steel electrodes as anode and cathode materials , 2007 .

[37]  Ioannis S. Chronakis,et al.  Conductive polypyrrole nanofibers via electrospinning: Electrical and morphological properties , 2006 .

[38]  Paul de Figueiredo,et al.  Microfabricated Microbial Fuel Cell Arrays Reveal Electrochemically Active Microbes , 2009, PloS one.

[39]  Lixian Sun,et al.  A mediatorless microbial fuel cell using polypyrrole coated carbon nanotubes composite as anode material , 2008 .

[40]  Joselito M. Razal,et al.  Wet-spinning of PEDOT:PSS/Functionalized-SWNTs Composite: a Facile Route Toward Production of Strong and Highly Conducting Multifunctional Fibers , 2013, Scientific Reports.

[41]  Haluk Beyenal,et al.  Scaling up microbial fuel cells. , 2008, Environmental science & technology.

[42]  J. Chae,et al.  Miniaturizing microbial fuel cells for potential portable power sources: promises and challenges , 2012 .

[43]  György Inzelt,et al.  Conducting Polymers: A New Era in Electrochemistry , 2008 .

[44]  Chun Xing Li,et al.  Solution-processed PEDOT:PSS/graphene composites as the electrocatalyst for oxygen reduction reaction. , 2014, ACS applied materials & interfaces.

[45]  Zhongze Gu,et al.  Poly (3,4-ethylenedioxythiophene) promotes direct electron transfer at the interface between Shewanella loihica and the anode in a microbial fuel cell , 2015 .

[46]  Geng Li,et al.  Graphene/poly(3,4-ethylenedioxythiophene) hydrogel with excellent mechanical performance and high conductivity , 2013 .

[47]  K. Hata,et al.  Shape-engineerable and highly densely packed single-walled carbon nanotubes and their application as super-capacitor electrodes , 2006, Nature materials.

[48]  Alexis Laforgue,et al.  Production of Conductive PEDOT Nanofibers by the Combination of Electrospinning and Vapor-Phase Polymerization , 2010 .

[49]  Hong Liu,et al.  Increased power generation in a continuous flow MFC with advective flow through the porous anode and reduced electrode spacing. , 2006, Environmental science & technology.

[50]  S. Ramakrishna,et al.  Electrospun conductive polyaniline–polylactic acid composite nanofibers as counter electrodes for rigid and flexible dye-sensitized solar cells , 2012 .

[51]  Fang Qian,et al.  A 1.5 microL microbial fuel cell for on-chip bioelectricity generation. , 2009, Lab on a chip.

[52]  Qinghua Zhang,et al.  Electrospun carbon nanotube composite nanofibres with uniaxially aligned arrays , 2007 .

[53]  Tae Jin Kang,et al.  Preparation and Properties of Electrically Conducting Textiles by In Situ Polymerization of Poly(3,4- ethylenedioxythiophene) , 2005 .

[54]  Seokheun Choi,et al.  Microscale microbial fuel cells: Advances and challenges. , 2015, Biosensors & bioelectronics.

[55]  Yi Cui,et al.  Graphene–sponges as high-performance low-cost anodes for microbial fuel cells , 2012 .

[56]  Yi Cui,et al.  Three-dimensional carbon nanotube-textile anode for high-performance microbial fuel cells. , 2011, Nano letters.

[57]  Seokheun Choi,et al.  A μL-scale micromachined microbial fuel cell having high power density. , 2011, Lab on a chip.

[58]  P. Couturier.  Japan , 1988, The Lancet.

[59]  Baikun Li,et al.  Novel electrode materials to enhance the bacterial adhesion and increase the power generation in microbial fuel cells (MFCs). , 2009, Water science and technology : a journal of the International Association on Water Pollution Research.

[60]  Duu-Jong Lee,et al.  Micro-sized microbial fuel cell: a mini-review. , 2011, Bioresource technology.

[61]  Justin C. Biffinger,et al.  Characterization of electrochemically active bacteria utilizing a high‐throughput voltage‐based screening assay , 2009, Biotechnology and bioengineering.

[62]  W. Verstraete,et al.  Loading rate and external resistance control the electricity generation of microbial fuel cells with different three-dimensional anodes. , 2008, Bioresource technology.

[63]  Zhen He,et al.  A microfluidic microbial fuel cell fabricated by soft lithography. , 2011, Bioresource technology.

[64]  Y. Miao,et al.  Electrically conductive polyaniline/polyimide nanofiber membranes prepared via a combination of electrospinning and subsequent in situ polymerization growth. , 2013, ACS applied materials & interfaces.

[65]  Yeong Suk Choi,et al.  PEDOT-PSS/Singlewall Carbon Nanotubes Composites , 2008 .

[66]  E. Hsiao,et al.  Fabrication of electrically-conducting nonwoven porous mats of polystyrene-polypyrrole core-shell nanofibers via electrospinning and vapor phase polymerization , 2008 .

[67]  Bruce E. Logan,et al.  AMMONIA TREATMENT OF CARBON CLOTH ANODES TO ENHANCE POWER GENERATION OF MICROBIAL FUEL CELLS , 2007 .

[68]  Gilles Lubineau,et al.  Improving electrical conductivity in polycarbonate nanocomposites using highly conductive PEDOT/PSS coated MWCNTs. , 2013, ACS applied materials & interfaces.