Discrete element method analysis of single wheel performance for a small lunar rover on sloped terrain

The purpose of this study is to analyze the performance of a lugged wheel for a lunar micro rover on sloped terrain by a 2D discrete element method (DEM), which was initially developed for horizontal terrain. To confirm the applicability of DEM for sloped terrain locomotion, the relationships of slope angle with slip, wheel sinkage and wheel torque obtained by DEM, were compared with experimental results measured using a slope test bed consisting of a soil bin filled with lunar regolith simulant. Among the lug parameters investigated, a lugged wheel with rim diameter of 250 mm, width of 100 mm, lug height of 10 mm, lug thickness of 5 mm, and total lug number of 18 was found, on average, to perform excellently in terms of metrics, such as slope angle for 20% slip, power number for self-propelled point, power number for 15-degree slope and power number for 20% slip. The estimation of wheel performance over sloped lunar terrain showed an increase in wheel slip, and the possibility exists that the selected lugged wheel will not be able to move up a slope steeper than 20°.

[1]  Hiroshi Nakashima,et al.  Parametric analysis of lugged wheel performance for a lunar microrover by means of DEM , 2007 .

[2]  Walter W. Boles,et al.  Properties of Lunar Soil Simulant JSC-1 , 1995 .

[3]  D. R. J. Owen,et al.  An Energy Based Corner to Contact Algorithm , 2002 .

[4]  David A. Horner,et al.  Large Scale Discrete Element Modeling of Vehicle-Soil Interaction , 2001 .

[5]  John C. Wells,et al.  Numerical and experimental studies of gravity effect on the mechanism of lunar excavations , 2009 .

[6]  Vivake M. Asnani,et al.  The development of wheels for the Lunar Roving Vehicle , 2009 .

[7]  Itzhak Shmulevich,et al.  PREDICTING SOIL-RIGID WHEEL PERFORMANCE USING DISTINCT ELEMENT METHODS , 2006 .

[8]  Alex Ellery,et al.  A predictive wheel-soil interaction model for planetary rovers validated in testbeds and against MER Mars rover performance data , 2006 .

[9]  A. Oida.  Application of DEM to simulate interaction between soil and tire lug , 2000 .

[10]  Dean R. Freitag,et al.  Wheels for lunar vehicles , 1972 .

[11]  R. D. Mindlin.  Elastic Spheres in Contact Under Varying Oblique Forces , 1953 .

[12]  Hayley H. Shen,et al.  Contrasting Terrestrial and Lunar Gravity: Angle of Repose and Incline Flows , 2006 .

[13]  Kojiro Iizuka,et al.  Study on traversability with consideration of wheeled forms for lunar and planetary exploration rovers , 2006 .

[14]  Satoshi Tamura,et al.  Simulation on Discharging Phenomena of Crains by Distinct Element Method , 1996 .

[15]  R. J. Sullivan,et al.  Discrete Element Modeling of a Rover Wheel in Granular Material Under the Influence of Earth, Mars, and Lunar Gravity , 2008 .

[16]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[17]  J Y Wong,et al.  Study of the correlation between the performances of lunar vehicle wheels predicted by the Nepean wheeled vehicle performance model and test data , 2008 .

[18]  A. J. Koolen,et al.  Simulation of a soil loosening process by means of the modified distinct element method , 2002 .

[19]  A. Oida.  Effect of tire lug cross section on tire performance simulated by distinct element method , 1999 .